Re: [PATCH v7 2/3] Input: Add Novatek NT36xxx touchscreen driver
From: Andy Shevchenko
Date: Mon Oct 26 2020 - 14:24:19 EST
On Sat, Oct 24, 2020 at 1:51 PM <kholk11@xxxxxxxxx> wrote:
>
> From: AngeloGioacchino Del Regno <kholk11@xxxxxxxxx>
>
> This is a driver for the Novatek in-cell touch controller and
> supports various chips from the NT36xxx family, currently
> including NT36525, NT36672A, NT36676F, NT36772 and NT36870.
>
> Functionality like wake gestures and firmware flashing is not
> included: I am not aware of any of these DrIC+Touch combo
> chips not including a non-volatile memory and it should be
> highly unlikely to find one, since the touch firmware is
> embedded into the DriverIC one, which is obviously necessary
> to drive the display unit.
>
> However, the necessary address for the firmware update
> procedure was included into the address table in this driver
> so, in the event that someone finds the need to implement it
> for a reason or another, it will be pretty straightforward to.
>
> This driver is lightly based on the downstream implementation [1].
> [1] https://github.com/Rasenkai/caf-tsoft-Novatek-nt36xxx
(From drafts, didn't have time to finish and see already v8, so please revisit)
...
> +#include <asm/unaligned.h>
> +#include <linux/delay.h>
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/input/mt.h>
> +#include <linux/input/touchscreen.h>
> +#include <linux/regulator/consumer.h>
Perhaps sorted? Also, asm/* usually go after linux/*.
...
> +#define TOUCH_MAX_PRESSURE 1000
Any units?
...
> + ts = devm_kzalloc(&hw_client->dev, sizeof(struct nt36xxx_i2c), GFP_KERNEL);
sizeof(*ts) ?
> + if (!ts)
> + return -ENOMEM;
> +
> + ts->supplies = devm_kcalloc(&hw_client->dev,
> + NT36XXX_NUM_SUPPLIES,
> + sizeof(struct regulator_bulk_data),
sizeof(*ts->supplies) ?
> + GFP_KERNEL);
> + if (!ts->supplies)
> + return -ENOMEM;
...
> + ret = devm_regulator_bulk_get(&hw_client->dev,
> + NT36XXX_NUM_SUPPLIES,
> + ts->supplies);
> + if (ret != 0) {
if (ret)
> + if (ret != -EPROBE_DEFER)
> + dev_err(&hw_client->dev,
> + "Cannot get supplies: %d\n", ret);
> + return ret;
> + }
...
> + input->phys = devm_kasprintf(&hw_client->dev, GFP_KERNEL,
> + "%s/input0", dev_name(&hw_client->dev));
NULL check?
...
> + ret = devm_request_threaded_irq(&hw_client->dev, hw_client->irq, NULL,
> + nt36xxx_i2c_irq_handler, IRQF_ONESHOT,
> + hw_client->name, ts);
> + if (ret) {
> + dev_err(&hw_client->dev, "request irq failed: %d\n", ret);
> + return ret;
> + }
> +
> + return 0;
return ret; ?
> +}
--
With Best Regards,
Andy Shevchenko