[PATCH v2] dt-bindings: power/supply: Add ltc4162-l-charger

[Mike Looijmans]

Add support for the LTC4162-L Li-Ion battery charger. The driver allows
reading back telemetry and to set some charging options like the input
current limit.

This adds the devicetree bindings.

Signed-off-by: Mike Looijmans <mike.looijmans@xxxxxxxx>
---
v2: Use microohms, add lltc,cell-count

 .../bindings/power/supply/ltc4162-l.yaml      | 68 +++++++++++++++++++
 1 file changed, 68 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml

diff --git a/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml b/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml
new file mode 100644
index 000000000000..42622ac54e28
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2020 Topic Embedded Products
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/ltc4162-l.yaml#";
+$schema: "http://devicetree.org/meta-schemas/core.yaml#";
+
+title: Linear Technology (Analog Devices) LTC4162-L Charger
+
+maintainers:
+  - Mike Looijmans <mike.looijmans@xxxxxxxx>
+
+description: |
+  The LTC ® 4162-L is an advanced monolithic synchronous step-down switching
+  battery charger and PowerPath (TM) manager that seamlessly manages power
+  distribution between input sources such as wall adapters, backplanes, solar
+  panels, etc., and a rechargeable Lithium-Ion/Polymer battery.
+
+  Specifications about the charger can be found at:
+    https://www.analog.com/en/products/ltc4162-s.html
+
+properties:
+  compatible:
+    enum:
+      - lltc,ltc4162-l
+
+  reg:
+    maxItems: 1
+    description: I2C address of the charger.
+
+  lltc,rsnsb-micro-ohms:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Battery sense resistor in microohm.
+    minimum: 1000
+
+  lltc,rsnsi-micro-ohms:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Input current sense resistor in microohm.
+    minimum: 1000
+
+  lltc,cell-count:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Number of battery cells. If not provided, will be obtained from the chip
+      once the external power is applied. Omit this when the number of cells
+      is somewhat dynamic. Without it, several measurements will return 0 until
+      the charger is connected to an external supply.
+
+required:
+  - compatible
+  - reg
+  - lltc,rsnsb
+  - lltc,rsnsi
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      charger: battery-charger@68 {
+              compatible = "lltc,ltc4162-l";
+              reg =  <0x68>;
+              lltc,rsnsb = <10>;
+              lltc,rsnsi = <16>;
+      };
+    };
-- 
2.17.1