Re: [PATCH V2 2/2] PCI: dwc: Add support to configure for ECRC

[Jingoo Han]

On 10/27/20, 4:03 AM, Vidya Sagar wrote:
> 
> DesignWare core has a TLP digest (TD) override bit in one of the control
> registers of ATU. This bit also needs to be programmed for proper ECRC
> functionality. This is currently identified as an issue with DesignWare
> IP version 4.90a. This patch does the required programming in ATU upon
> querying the system policy for ECRC.
>
> Signed-off-by: Vidya Sagar <vidyas@xxxxxxxxxx>

Acked-by: Jingoo Han <jingoohan1@xxxxxxxxx>

Best regards,
Jingoo Han

> ---
> V2:
> * Addressed Jingoo's review comment
> * Removed saving 'td' bit information in 'dw_pcie' structure
>
>  drivers/pci/controller/dwc/pcie-designware.c | 8 ++++++--
>  drivers/pci/controller/dwc/pcie-designware.h | 1 +
>  2 files changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> index b5e438b70cd5..cbd651b219d2 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.c
> +++ b/drivers/pci/controller/dwc/pcie-designware.c
> @@ -246,6 +246,8 @@ static void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, u8 func_no,
>  	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET,
>  				 upper_32_bits(pci_addr));
>  	val = type | PCIE_ATU_FUNC_NUM(func_no);
> +	if (pci->version == 0x490A)
> +		val = val | pcie_is_ecrc_enabled() << PCIE_ATU_TD_SHIFT;
>  	val = upper_32_bits(size - 1) ?
>  		val | PCIE_ATU_INCREASE_REGION_SIZE : val;
>  	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1, val);
> @@ -294,8 +296,10 @@ static void __dw_pcie_prog_outbound_atu(struct dw_pcie *pci, u8 func_no,
>  			   lower_32_bits(pci_addr));
>  	dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET,
>  			   upper_32_bits(pci_addr));
> -	dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type |
> -			   PCIE_ATU_FUNC_NUM(func_no));
> +	val = type | PCIE_ATU_FUNC_NUM(func_no);
> +	if (pci->version == 0x490A)
> +		val = val | pcie_is_ecrc_enabled() << PCIE_ATU_TD_SHIFT;
> +	dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, val);
>  	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE);
>
>  	/*
> diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> index 21dd06831b50..e5449b205c22 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.h
> +++ b/drivers/pci/controller/dwc/pcie-designware.h
> @@ -90,6 +90,7 @@
>  #define PCIE_ATU_TYPE_IO		0x2
>  #define PCIE_ATU_TYPE_CFG0		0x4
>  #define PCIE_ATU_TYPE_CFG1		0x5
> +#define PCIE_ATU_TD_SHIFT		8
>  #define PCIE_ATU_FUNC_NUM(pf)           ((pf) << 20)
>  #define PCIE_ATU_CR2			0x908
>  #define PCIE_ATU_ENABLE			BIT(31)
> -- 
> 2.17.1