[PATCH 5.9 602/757] arm64: dts: qcom: sc7180: Drop flags on mdss irqs

[Greg Kroah-Hartman]

From: Stephen Boyd <swboyd@xxxxxxxxxxxx>

[ Upstream commit 51e9874d382e089f664b3ce12773bbbaece5f369 ]

The number of interrupt cells for the mdss interrupt controller is 1,
meaning there should only be one cell for the interrupt number, not two
where the second cell is the irq flags. Drop the second cell to match
the binding.

Cc: Kalyan Thota <kalyan_t@xxxxxxxxxxxxxx>
Cc: Harigovindan P <harigovi@xxxxxxxxxxxxxx
Fixes: a3db7ad1af49 ("arm64: dts: sc7180: add display dt nodes")
Signed-off-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20200811192503.1811462-1-swboyd@xxxxxxxxxxxx
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index e875f6c3b6639..a6be72d8f6fde 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -2785,7 +2785,7 @@ mdp: mdp@ae01000 {
 				power-domains = <&rpmhpd SC7180_CX>;
 
 				interrupt-parent = <&mdss>;
-				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <0>;
 
 				status = "disabled";
 
@@ -2833,7 +2833,7 @@ dsi0: dsi@ae94000 {
 				reg-names = "dsi_ctrl";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <4>;
 
 				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
 					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
-- 
2.25.1