[PATCH v2 08/12] ARM: dts: exynos: adjust node names to DT spec in Exynos542x boards
From: Krzysztof Kozlowski
Date: Tue Oct 27 2020 - 13:11:02 EST
The Devicetree specification expects device node names to have a generic
name, representing the class of a device. Also the convention for node
names is to use hyphens, not underscores.
No functional changes.
Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
---
arch/arm/boot/dts/exynos5420-arndale-octa.dts | 4 ++--
arch/arm/boot/dts/exynos5420-peach-pit.dts | 6 +++---
arch/arm/boot/dts/exynos5420-smdk5420.dts | 2 +-
arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 2 +-
arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi | 2 +-
arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 4 ++--
arch/arm/boot/dts/exynos5422-odroidxu3.dts | 8 ++++----
arch/arm/boot/dts/exynos5800-peach-pi.dts | 4 ++--
8 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index dd7f8385d81e..bf457d0c02eb 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -39,7 +39,7 @@ oscclk {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
wakeup {
@@ -344,7 +344,7 @@ &hdmi {
&hsi2c_4 {
status = "okay";
- s2mps11_pmic@66 {
+ pmic@66 {
compatible = "samsung,s2mps11-pmic";
reg = <0x66>;
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 2bcbdf8a39bf..315b3dc9c017 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -138,7 +138,7 @@ panel_in: endpoint {
};
};
- mmc1_pwrseq: mmc1_pwrseq {
+ mmc1_pwrseq: mmc1-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpx0 0 GPIO_ACTIVE_LOW>; /* WIFI_EN */
clocks = <&max77802 MAX77802_CLK_32K_CP>;
@@ -205,7 +205,7 @@ &hsi2c_4 {
status = "okay";
clock-frequency = <400000>;
- max77802: max77802-pmic@9 {
+ max77802: pmic@9 {
compatible = "maxim,max77802";
interrupt-parent = <&gpx3>;
interrupts = <1 IRQ_TYPE_NONE>;
@@ -615,7 +615,7 @@ &hsi2c_7 {
status = "okay";
clock-frequency = <400000>;
- max98090: codec@10 {
+ max98090: audio-codec@10 {
compatible = "maxim,max98090";
reg = <0x10>;
interrupts = <2 IRQ_TYPE_NONE>;
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index 4e49d8095b29..d506da9fa661 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -129,7 +129,7 @@ &hdmi {
&hsi2c_4 {
status = "okay";
- s2mps11_pmic@66 {
+ pmic@66 {
compatible = "samsung,s2mps11-pmic";
reg = <0x66>;
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index b1cf9414ce17..25fb6331c75e 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -503,7 +503,7 @@ &dmc {
&hsi2c_4 {
status = "okay";
- s2mps11_pmic@66 {
+ pmic@66 {
compatible = "samsung,s2mps11-pmic";
reg = <0x66>;
samsung,s2mps11-acokb-ground;
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
index b5ec4f47eb3a..86b96f9706db 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
@@ -40,7 +40,7 @@ codec {
&hsi2c_5 {
status = "okay";
- max98090: max98090@10 {
+ max98090: audio-codec@10 {
compatible = "maxim,max98090";
reg = <0x10>;
interrupt-parent = <&gpx3>;
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index 5da2d81e3be2..e35af40a55cb 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -13,12 +13,12 @@
#include "exynos5422-odroid-core.dtsi"
/ {
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&power_key>;
- power_key {
+ power-key {
/*
* The power button (SW2) is connected to the PWRON
* pin (active high) of the S2MPS11 PMIC, which acts
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
index d0f6ac5fa79d..53aee3d56f6a 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
@@ -21,28 +21,28 @@ &i2c_0 {
status = "okay";
/* A15 cluster: VDD_ARM */
- ina231@40 {
+ power-sensor@40 {
compatible = "ti,ina231";
reg = <0x40>;
shunt-resistor = <10000>;
};
/* memory: VDD_MEM */
- ina231@41 {
+ power-sensor@41 {
compatible = "ti,ina231";
reg = <0x41>;
shunt-resistor = <10000>;
};
/* GPU: VDD_G3D */
- ina231@44 {
+ power-sensor@44 {
compatible = "ti,ina231";
reg = <0x44>;
shunt-resistor = <10000>;
};
/* A7 cluster: VDD_KFC */
- ina231@45 {
+ power-sensor@45 {
compatible = "ti,ina231";
reg = <0x45>;
shunt-resistor = <10000>;
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 60ab0effe474..0ce3443d39a8 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -138,7 +138,7 @@ panel_in: endpoint {
};
};
- mmc1_pwrseq: mmc1_pwrseq {
+ mmc1_pwrseq: mmc1-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpx0 0 GPIO_ACTIVE_LOW>; /* WIFI_EN */
clocks = <&max77802 MAX77802_CLK_32K_CP>;
@@ -214,7 +214,7 @@ &hsi2c_4 {
status = "okay";
clock-frequency = <400000>;
- max77802: max77802-pmic@9 {
+ max77802: pmic@9 {
compatible = "maxim,max77802";
interrupt-parent = <&gpx3>;
interrupts = <1 IRQ_TYPE_NONE>;
--
2.25.1