[PATCH v2 03/12] ARM: dts: exynos: override GPIO keys node by label in Exynos4412 Odroid family

From: Krzysztof Kozlowski
Date: Tue Oct 27 2020 - 13:11:03 EST


Using full paths to extend or override a device tree node is error
prone. If there was a typo error, a new node will be created instead of
extending the existing node. This will lead to run-time errors that
could be hard to detect.

A mistyped label on the other hand, will cause a dtc compile error
(during build time).

Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
---
.../boot/dts/exynos4412-odroid-common.dtsi | 2 +-
arch/arm/boot/dts/exynos4412-odroidx.dts | 24 +++++++++----------
2 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index 2983e91bc7dd..c3b6e6d367ab 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -22,7 +22,7 @@ firmware@204f000 {
reg = <0x0204F000 0x1000>;
};

- gpio_keys {
+ gpio_keys: gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&gpio_power_key>;
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 3ea2a0101e80..68fe88074d1d 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -36,18 +36,6 @@ led2 {
};
};

- gpio_keys {
- pinctrl-0 = <&gpio_power_key &gpio_home_key>;
-
- home_key {
- gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_HOME>;
- label = "home key";
- debounce-interval = <10>;
- wakeup-source;
- };
- };
-
regulator_p3v3 {
compatible = "regulator-fixed";
regulator-name = "p3v3_en";
@@ -76,6 +64,18 @@ &ehci {
phy-names = "hsic0";
};

+&gpio_keys {
+ pinctrl-0 = <&gpio_power_key &gpio_home_key>;
+
+ home-key {
+ gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_HOME>;
+ label = "home key";
+ debounce-interval = <10>;
+ wakeup-source;
+ };
+};
+
&mshc_0 {
vqmmc-supply = <&buck8_reg>;
};
--
2.25.1