[PATCH 1/4] drm/bridge: ti-sn65dsi86: Combine register accesses in ti_sn_aux_transfer()
From: Stephen Boyd
Date: Wed Oct 28 2020 - 21:21:09 EST
These register reads and writes are sometimes directly next to each
other in the register address space. Let's use regmap bulk read/write
APIs to get the data with one transfer instead of multiple i2c
transfers. This helps cut down on the number of transfers in the case of
something like reading an EDID where we read in blocks of 16 bytes at a
time and the last for loop here is sending an i2c transfer for each of
those 16 bytes, one at a time. Ouch!
Cc: Douglas Anderson <dianders@xxxxxxxxxxxx>
Cc: Laurent Pinchart <Laurent.pinchart@xxxxxxxxxxxxxxxx>
Cc: Jonas Karlman <jonas@xxxxxxxxx>
Cc: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
Cc: Sean Paul <seanpaul@xxxxxxxxxxxx>
Signed-off-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
---
drivers/gpu/drm/bridge/ti-sn65dsi86.c | 50 ++++++++++++---------------
1 file changed, 22 insertions(+), 28 deletions(-)
diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
index ecdf9b01340f..87726b9e446f 100644
--- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
+++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
@@ -17,6 +17,8 @@
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
+#include <asm/unaligned.h>
+
#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_bridge.h>
@@ -72,6 +74,7 @@
#define SN_AUX_ADDR_19_16_REG 0x74
#define SN_AUX_ADDR_15_8_REG 0x75
#define SN_AUX_ADDR_7_0_REG 0x76
+#define SN_AUX_ADDR_MASK GENMASK(19, 0)
#define SN_AUX_LENGTH_REG 0x77
#define SN_AUX_CMD_REG 0x78
#define AUX_CMD_SEND BIT(0)
@@ -841,11 +844,13 @@ static ssize_t ti_sn_aux_transfer(struct drm_dp_aux *aux,
struct ti_sn_bridge *pdata = aux_to_ti_sn_bridge(aux);
u32 request = msg->request & ~DP_AUX_I2C_MOT;
u32 request_val = AUX_CMD_REQ(msg->request);
- u8 *buf = (u8 *)msg->buffer;
+ u8 *buf = msg->buffer;
+ unsigned int len = msg->size;
unsigned int val;
- int ret, i;
+ int ret;
+ u8 addr_len[SN_AUX_LENGTH_REG + 1 - SN_AUX_ADDR_19_16_REG];
- if (msg->size > SN_AUX_MAX_PAYLOAD_BYTES)
+ if (len > SN_AUX_MAX_PAYLOAD_BYTES)
return -EINVAL;
switch (request) {
@@ -859,19 +864,14 @@ static ssize_t ti_sn_aux_transfer(struct drm_dp_aux *aux,
return -EINVAL;
}
- regmap_write(pdata->regmap, SN_AUX_ADDR_19_16_REG,
- (msg->address >> 16) & 0xF);
- regmap_write(pdata->regmap, SN_AUX_ADDR_15_8_REG,
- (msg->address >> 8) & 0xFF);
- regmap_write(pdata->regmap, SN_AUX_ADDR_7_0_REG, msg->address & 0xFF);
-
- regmap_write(pdata->regmap, SN_AUX_LENGTH_REG, msg->size);
+ BUILD_BUG_ON(sizeof(addr_len) != sizeof(__be32));
+ put_unaligned_be32((msg->address & SN_AUX_ADDR_MASK) << 8 | len,
+ addr_len);
+ regmap_bulk_write(pdata->regmap, SN_AUX_ADDR_19_16_REG, addr_len,
+ ARRAY_SIZE(addr_len));
- if (request == DP_AUX_NATIVE_WRITE || request == DP_AUX_I2C_WRITE) {
- for (i = 0; i < msg->size; i++)
- regmap_write(pdata->regmap, SN_AUX_WDATA_REG(i),
- buf[i]);
- }
+ if (request == DP_AUX_NATIVE_WRITE || request == DP_AUX_I2C_WRITE)
+ regmap_bulk_write(pdata->regmap, SN_AUX_WDATA_REG(0), buf, len);
/* Clear old status bits before start so we don't get confused */
regmap_write(pdata->regmap, SN_AUX_CMD_STATUS_REG,
@@ -895,21 +895,15 @@ static ssize_t ti_sn_aux_transfer(struct drm_dp_aux *aux,
|| (val & AUX_IRQ_STATUS_AUX_SHORT))
return -ENXIO;
- if (request == DP_AUX_NATIVE_WRITE || request == DP_AUX_I2C_WRITE)
- return msg->size;
+ if (request == DP_AUX_NATIVE_WRITE || request == DP_AUX_I2C_WRITE ||
+ len == 0)
+ return len;
- for (i = 0; i < msg->size; i++) {
- unsigned int val;
- ret = regmap_read(pdata->regmap, SN_AUX_RDATA_REG(i),
- &val);
- if (ret)
- return ret;
-
- WARN_ON(val & ~0xFF);
- buf[i] = (u8)(val & 0xFF);
- }
+ ret = regmap_bulk_read(pdata->regmap, SN_AUX_RDATA_REG(0), buf, len);
+ if (ret)
+ return ret;
- return msg->size;
+ return len;
}
static int ti_sn_bridge_parse_dsi_host(struct ti_sn_bridge *pdata)
--
Sent by a computer, using git, on the internet