Re: Re: [PATCH 1/1] clk: aspeed: modify some default clks are critical

From: Samuel Holland
Date: Wed Oct 28 2020 - 22:28:12 EST


Stephen,

On 10/14/20 12:16 PM, Stephen Boyd wrote:
> Quoting Joel Stanley (2020-10-13 22:28:00)
>> On Wed, 14 Oct 2020 at 02:50, Stephen Boyd <sboyd@xxxxxxxxxx> wrote:
>>>
>>> Quoting Ryan Chen (2020-09-28 00:01:08)
>>>> In ASPEED SoC LCLK is LPC clock for all SuperIO device, UART1/UART2 are
>>>> default for Host SuperIO UART device, eSPI clk for Host eSPI bus access
>>>> eSPI slave channel, those clks can't be disable should keep default,
>>>> otherwise will affect Host side access SuperIO and SPI slave device.
>>>>
>>>> Signed-off-by: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
>>>> ---
>>>
>>> Is there resolution on this thread?
>>
>> Not yet.
>>
>> We have a system where the BMC (management controller) controls some
>> clocks, but the peripherals that it's clocking are outside the BMC's
>> control. In this case, the host processor us using some UARTs and what
>> not independent of any code running on the BMC.
>>
>> Ryan wants to have them marked as critical so the BMC never powers them down.
>>
>> However, there are systems that don't use this part of the soc, so for
>> those implementations they are not critical and Linux on the BMC can
>> turn them off.
>>
>> Do you have any thoughts? Has anyone solved a similar problem already?
>>
>
> Is this critical clocks in DT? Where we want to have different DT for
> different device configurations to indicate that some clks should be
> marked critical so they're never turned off and other times they aren't
> so they're turned off?
>
> It also sounds sort of like the protected-clocks binding. Where you
> don't want to touch certain clks depending on the usage configuration of
> the SoC. There is a patch to make that generic that I haven't applied
> because it looks wrong at first glance[1]. Maybe not registering those
> clks to the framework on the configuration that Ryan has is good enough?

Could you please be more specific than the patch "looks wrong"? I'm more than
happy to update the patch to address your concerns, but I cannot do that unless
I know what your concerns are.

Regards,
Samuel

> [1] https://lore.kernel.org/r/20200903040015.5627-2-samuel@xxxxxxxxxxxx