Re: [RFC PATCH 2/3] RISC-V: Initial DTS for Microchip ICICLE board
From: Ben Dooks
Date: Thu Oct 29 2020 - 06:40:05 EST
On 28/10/2020 23:27, Atish Patra wrote:
Add initial DTS for Microchip ICICLE board having only
essential devcies (clocks, sdhci, ethernet, serial, etc).
Signed-off-by: Atish Patra <atish.patra@xxxxxxx>
---
arch/riscv/boot/dts/Makefile | 1 +
arch/riscv/boot/dts/microchip/Makefile | 2 +
.../microchip/microchip-icicle-kit-a000.dts | 313 ++++++++++++++++++
3 files changed, 316 insertions(+)
create mode 100644 arch/riscv/boot/dts/microchip/Makefile
create mode 100644 arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts
diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile
index ca1f8cbd78c0..3ea94ea0a18a 100644
--- a/arch/riscv/boot/dts/Makefile
+++ b/arch/riscv/boot/dts/Makefile
@@ -1,5 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
subdir-y += sifive
subdir-y += kendryte
+subdir-y += microchip
obj-$(CONFIG_BUILTIN_DTB) := $(addsuffix /, $(subdir-y))
diff --git a/arch/riscv/boot/dts/microchip/Makefile b/arch/riscv/boot/dts/microchip/Makefile
new file mode 100644
index 000000000000..55ad77521304
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += microchip-icicle-kit-a000.dtb
diff --git a/arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts b/arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts
new file mode 100644
index 000000000000..5848920af55c
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts
@@ -0,0 +1,313 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Copyright (c) 2020 Microchip Technology Inc */
+
+/dts-v1/;
+
+/* Clock frequency (in Hz) of the rtcclk */
+#define RTCCLK_FREQ 1000000
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ model = "Microchip PolarFire-SoC";
+ compatible = "microchip,polarfire-soc";
+
+ chosen {
+ stdout-path = &serial0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ timebase-frequency = <RTCCLK_FREQ>;
+
+ cpu@0 {
+ clock-frequency = <0>;
+ compatible = "sifive,rocket0", "riscv";
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <128>;
+ i-cache-size = <16384>;
+ reg = <0>;
+ riscv,isa = "rv64imac";
+ status = "disabled";
+
+ cpu0_intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+
+ cpu@1 {
+ clock-frequency = <0>;
+ compatible = "sifive,rocket0", "riscv";
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <32>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <32>;
+ mmu-type = "riscv,sv39";
+ reg = <1>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+ status = "okay";
+
+ cpu1_intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+
+ cpu@2 {
+ clock-frequency = <0>;
+ compatible = "sifive,rocket0", "riscv";
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <32>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <32>;
+ mmu-type = "riscv,sv39";
+ reg = <2>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+ status = "okay";
+
+ cpu2_intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+
+ cpu@3 {
+ clock-frequency = <0>;
+ compatible = "sifive,rocket0", "riscv";
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <32>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <32>;
+ mmu-type = "riscv,sv39";
+ reg = <3>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+ status = "okay";
+
+ cpu3_intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+
+ cpu@4 {
+ clock-frequency = <0>;
+ compatible = "sifive,rocket0", "riscv";
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <32>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <32>;
+ mmu-type = "riscv,sv39";
+ reg = <4>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+ status = "okay";
+ cpu4_intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0x40000000>;
+ clocks = <&clkcfg 26>;
+ };
U-boot doesn't seem to be updating this properly.
The board should have 2GiB, confirmed by looking at the device's
chip markings. We only see 1GiB memory. The 0x80000000 bus window
is only capable of dealing with 1GiB memory. The higher 64-bit one
can have 16GiB mapped.
Do we need a second node for the second GiB of memory?
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ ranges;
+
+ cache-controller@2010000 {
+ compatible = "sifive,fu540-c000-ccache", "cache";
+ cache-block-size = <64>;
+ cache-level = <2>;
+ cache-sets = <1024>;
+ cache-size = <2097152>;
+ cache-unified;
+ interrupt-parent = <&plic>;
+ interrupts = <1 2 3>;
+ reg = <0x0 0x2010000 0x0 0x1000>;
+ };
+
+ clint@2000000 {
+ compatible = "riscv,clint0";
+ reg = <0x0 0x2000000 0x0 0xC000>;
+ interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
+ &cpu1_intc 3 &cpu1_intc 7
+ &cpu2_intc 3 &cpu2_intc 7
+ &cpu3_intc 3 &cpu3_intc 7
+ &cpu4_intc 3 &cpu4_intc 7>;
+ };
+
+ plic: interrupt-controller@c000000 {
+ #interrupt-cells = <1>;
+ compatible = "sifive,plic-1.0.0";
+ reg = <0x0 0xc000000 0x0 0x4000000>;
+ riscv,ndev = <53>;
+ interrupt-controller;
+ interrupts-extended = <&cpu0_intc 11
+ &cpu1_intc 11 &cpu1_intc 9
+ &cpu2_intc 11 &cpu2_intc 9
+ &cpu3_intc 11 &cpu3_intc 9
+ &cpu4_intc 11 &cpu4_intc 9>;
+ };
+
+ dma@3000000 {
+ compatible = "sifive,fu540-c000-pdma";
+ reg = <0x0 0x3000000 0x0 0x8000>;
+ interrupt-parent = <&plic>;
+ interrupts = <23 24 25 26 27 28 29 30>;
+ #dma-cells = <1>;
+ };
+
+ refclk: refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <600000000>;
+ clock-output-names = "msspllclk";
+ };
+
+ clkcfg: clkcfg@20002000 {
+ compatible = "microchip,pfsoc-clkcfg";
+ reg = <0x0 0x20002000 0x0 0x1000>;
+ reg-names = "mss_sysreg";
+ clocks = <&refclk>;
+ #clock-cells = <1>;
+ clock-output-names = "cpuclk", "axiclk", "ahbclk", "ENVMclk", "MAC0clk", "MAC1clk", "MMCclk", "TIMERclk", "MMUART0clk", "MMUART1clk", "MMUART2clk", "MMUART3clk", "MMUART4clk", "SPI0clk", "SPI1clk", "I2C0clk", "I2C1clk", "CAN0clk", "CAN1clk", "USBclk", "RESERVED", "RTCclk", "QSPIclk", "GPIO0clk", "GPIO1clk", "GPIO2clk", "DDRCclk", "FIC0clk", "FIC1clk", "FIC2clk", "FIC3clk", "ATHENAclk", "CFMclk";
Any chance of making this list multi-line, it is difficult to read as-is.
+ };
+
+ serial0: serial@20000000 {
+ compatible = "ns16550a";
+ reg = <0x0 0x20000000 0x0 0x400>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ interrupt-parent = <&plic>;
+ interrupts = <90>;
+ current-speed = <115200>;
+ clocks = <&clkcfg 8>;
+ status = "okay";
+ };
+
+ serial1: serial@20100000 {
+ compatible = "ns16550a";
+ reg = <0x0 0x20100000 0x0 0x400>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ interrupt-parent = <&plic>;
+ interrupts = <91>;
+ current-speed = <115200>;
+ clocks = <&clkcfg 9>;
+ status = "okay";
+ };
+
+ serial2: serial@20102000 {
+ compatible = "ns16550a";
+ reg = <0x0 0x20102000 0x0 0x400>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ interrupt-parent = <&plic>;
+ interrupts = <92>;
+ current-speed = <115200>;
+ clocks = <&clkcfg 10>;
+ status = "okay";
+ };
+
+ serial3: serial@20104000 {
+ compatible = "ns16550a";
+ reg = <0x0 0x20104000 0x0 0x400>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ interrupt-parent = <&plic>;
+ interrupts = <93>;
+ current-speed = <115200>;
+ clocks = <&clkcfg 11>;
+ status = "okay";
+ };
+
+ sdcard: sdhc@20008000 {
+ compatible = "cdns,sd4hc";
+ reg = <0x0 0x20008000 0x0 0x1000>;
+ interrupt-parent = <&plic>;
+ interrupts = <88>;
+ pinctrl-names = "default";
+ clocks = <&clkcfg 6>;
+ bus-width = <4>;
+ disable-wp;
+ no-1-8-v;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ card-detect-delay = <200>;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ max-frequency = <200000000>;
+ status = "okay";
+ };
Given eMMC is the default device, shouldn't that be default for the
device tree too? Even if not, having the emmc node here would be a
good thing as it is different to the SD node.
+
+ emac1: ethernet@20112000 {
+ compatible = "cdns,macb";
+ reg = <0x0 0x20112000 0x0 0x2000>;
+ interrupt-parent = <&plic>;
+ interrupts = <70 71 72 73>;
+ mac-address = [56 34 12 00 FC 00];
+ phy-mode = "sgmii";
+ clocks = <&clkcfg 5>, <&clkcfg 2>;
+ clock-names = "pclk", "hclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy1: ethernet-phy@9 {
+ reg = <9>;
+ ti,fifo-depth = <0x01>;
+ };
+ };
Aren't there two ethernet ports on the board?
Also, at the moment u-boot is not filling the MAC address parameter
in so we've got at two boards on the network with the same MAC until
we override it in the device tree for the second.
+
+ uio_axi_lsram@2030000000 {
+ compatible = "generic-uio";
+ reg = <0x20 0x30000000 0 0x80000000 >;
+ status = "okay";
+ };
+ };
+};
--
Ben Dooks http://www.codethink.co.uk/
Senior Engineer Codethink - Providing Genius
https://www.codethink.co.uk/privacy.html