Re: [PATCH v3 3/3] mmc: rtsx: Add SD Express mode support for RTS5261

[Ulf Hansson]

On Thu, 29 Oct 2020 at 02:58, <rui_feng@xxxxxxxxxxxxxx> wrote:
>
> From: Rui Feng <rui_feng@xxxxxxxxxxxxxx>
>
> RTS5261 support SD mode and PCIe/NVMe mode. The workflow is as follows.
> 1.RTS5261 work in SD mode and set MMC_CAPS2_SD_EXP flag.
> 2.If card is plugged in, Host send CMD8 to ask card's PCIe availability.
> 3.If the card has PCIe availability and WP is not set, init_sd_express() will be invoked,
> RTS5261 switch to PCIe/NVMe mode.
> 4.Mmc driver handover it to NVMe driver.
> 5.If card is unplugged, RTS5261 will switch to SD mode.
>
> Signed-off-by: Rui Feng <rui_feng@xxxxxxxxxxxxxx>

I have applied the series for next, thanks!

Kind regards
Uffe


> ---
> v2:
> 1.re-enable mmc caps in sd_power_on()
> 2.don't check write protect bit in init_sd_express()
> v3:
> 1.add comment write protect switch is needed
> 2.add host->eject = true in the end of init_sd_express()
> ---
>  drivers/mmc/host/rtsx_pci_sdmmc.c | 58 +++++++++++++++++++++++++++++++
>  1 file changed, 58 insertions(+)
>
> diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c
> index 2763a376b054..3b6474cce703 100644
> --- a/drivers/mmc/host/rtsx_pci_sdmmc.c
> +++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
> @@ -895,7 +895,9 @@ static int sd_set_bus_width(struct realtek_pci_sdmmc *host,
>  static int sd_power_on(struct realtek_pci_sdmmc *host)
>  {
>         struct rtsx_pcr *pcr = host->pcr;
> +       struct mmc_host *mmc = host->mmc;
>         int err;
> +       u32 val;
>
>         if (host->power_state == SDMMC_POWER_ON)
>                 return 0;
> @@ -922,6 +924,21 @@ static int sd_power_on(struct realtek_pci_sdmmc *host)
>         if (err < 0)
>                 return err;
>
> +       if (PCI_PID(pcr) == PID_5261) {
> +               if (pcr->extra_caps & EXTRA_CAPS_SD_EXPRESS)
> +                       mmc->caps2 |= MMC_CAP2_SD_EXP | MMC_CAP2_SD_EXP_1_2V;
> +               /*
> +                * HW read wp status when resuming from S3/S4,
> +                * and then picks SD legacy interface if it's set
> +                * in read-only mode.
> +                */
> +               val = rtsx_pci_readl(pcr, RTSX_BIPR);
> +               if (val & SD_WRITE_PROTECT) {
> +                       pcr->extra_caps &= ~EXTRA_CAPS_SD_EXPRESS;
> +                       mmc->caps2 &= ~(MMC_CAP2_SD_EXP | MMC_CAP2_SD_EXP_1_2V);
> +               }
> +       }
> +
>         host->power_state = SDMMC_POWER_ON;
>         return 0;
>  }
> @@ -1308,6 +1325,44 @@ static int sdmmc_execute_tuning(struct mmc_host *mmc, u32 opcode)
>         return err;
>  }
>
> +static int sdmmc_init_sd_express(struct mmc_host *mmc, struct mmc_ios *ios)
> +{
> +       u32 relink_time;
> +       struct realtek_pci_sdmmc *host = mmc_priv(mmc);
> +       struct rtsx_pcr *pcr = host->pcr;
> +
> +       /* Set relink_time for changing to PCIe card */
> +       relink_time = 0x8FFF;
> +
> +       rtsx_pci_write_register(pcr, 0xFF01, 0xFF, relink_time);
> +       rtsx_pci_write_register(pcr, 0xFF02, 0xFF, relink_time >> 8);
> +       rtsx_pci_write_register(pcr, 0xFF03, 0x01, relink_time >> 16);
> +
> +       rtsx_pci_write_register(pcr, PETXCFG, 0x80, 0x80);
> +       rtsx_pci_write_register(pcr, LDO_VCC_CFG0,
> +               RTS5261_LDO1_OCP_THD_MASK,
> +               pcr->option.sd_800mA_ocp_thd);
> +
> +       if (pcr->ops->disable_auto_blink)
> +               pcr->ops->disable_auto_blink(pcr);
> +
> +       /* For PCIe/NVMe mode can't enter delink issue */
> +       pcr->hw_param.interrupt_en &= ~(SD_INT_EN);
> +       rtsx_pci_writel(pcr, RTSX_BIER, pcr->hw_param.interrupt_en);
> +
> +       rtsx_pci_write_register(pcr, RTS5260_AUTOLOAD_CFG4,
> +               RTS5261_AUX_CLK_16M_EN, RTS5261_AUX_CLK_16M_EN);
> +       rtsx_pci_write_register(pcr, RTS5261_FW_CFG0,
> +               RTS5261_FW_ENTER_EXPRESS, RTS5261_FW_ENTER_EXPRESS);
> +       rtsx_pci_write_register(pcr, RTS5261_FW_CFG1,
> +               RTS5261_MCU_BUS_SEL_MASK | RTS5261_MCU_CLOCK_SEL_MASK
> +               | RTS5261_MCU_CLOCK_GATING | RTS5261_DRIVER_ENABLE_FW,
> +               RTS5261_MCU_CLOCK_SEL_16M | RTS5261_MCU_CLOCK_GATING
> +               | RTS5261_DRIVER_ENABLE_FW);
> +       host->eject = true;
> +       return 0;
> +}
> +
>  static const struct mmc_host_ops realtek_pci_sdmmc_ops = {
>         .pre_req = sdmmc_pre_req,
>         .post_req = sdmmc_post_req,
> @@ -1317,6 +1372,7 @@ static const struct mmc_host_ops realtek_pci_sdmmc_ops = {
>         .get_cd = sdmmc_get_cd,
>         .start_signal_voltage_switch = sdmmc_switch_voltage,
>         .execute_tuning = sdmmc_execute_tuning,
> +       .init_sd_express = sdmmc_init_sd_express,
>  };
>
>  static void init_extra_caps(struct realtek_pci_sdmmc *host)
> @@ -1338,6 +1394,8 @@ static void init_extra_caps(struct realtek_pci_sdmmc *host)
>                 mmc->caps |= MMC_CAP_8_BIT_DATA;
>         if (pcr->extra_caps & EXTRA_CAPS_NO_MMC)
>                 mmc->caps2 |= MMC_CAP2_NO_MMC;
> +       if (pcr->extra_caps & EXTRA_CAPS_SD_EXPRESS)
> +               mmc->caps2 |= MMC_CAP2_SD_EXP | MMC_CAP2_SD_EXP_1_2V;
>  }
>
>  static void realtek_init_host(struct realtek_pci_sdmmc *host)
> --
> 2.17.1
>