Re: [PATCH 3/5] ARM: dts: sun8i: s3: Add dtsi for the Elimo Impetus SoM

[Matteo Scordino]

Hello Paul,

Thanks for reviewing! 
It seems from the comments in [PATCH 4/5] that the consensus would be to 
drop allwinner,sun8i-s3 and keep sochip,s3 (I guess due to the fact that
the S3 is distributed by Sochip).
And yes, you're right that it makes sense to add allwinner,sun8i-v3 at 
the end. 

So I guess I will resubmit with:
compatible = "elimo,impetus", "sochip,s3", "allwinner,sun8i-v3";

Regarding adding allwinner,sun8i-v3 to sunxi.c: I agree, but I would
hear Icenowy thinks (I think she added allwinner,sun8i-v3 in a patch
last month).

-- 
Matteo Scordino

On Thu, 2020-10-29 at 11:09 +0100, Paul Kocialkowski wrote:
> Hi,
> 
> On Thu 29 Oct 20, 02:19, Matteo Scordino wrote:
> > The Elimo Engineering Impetus is an Open Source Hardware System-on-Module
> > based on the SoChip S3 SoC.
> > 
> > It is meant for integration into carrier boards or, more generally,
> > larger designs, and uses an M2 connector to facilitate that.
> > 
> > Interfaces on the M.2/NGFF 42mm connector:
> > WiFi IEEE 802. 11abgn (on-module Realtek)
> > Bluetooth 4.2/BLE (on-module Realtek)
> > RGB LCD Interface (on-module connector)
> > MIPI Camera Interface (on-module connector)
> > IEEE 802. 3u Ethernet MAC (external connecto)
> > USB2.0 (Host, Device, OTG) (external connector)
> > Audio Line In/Out (external connector)
> > 
> > Signed-off-by: Matteo Scordino <matteo.scordino@xxxxxxxxx>
> > ---
> >  arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi | 51 +++++++++++++++++++
> >  1 file changed, 51 insertions(+)
> >  create mode 100644 arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi
> > 
> > diff --git a/arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi
> > b/arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi
> > new file mode 100644
> > index 000000000000..3550125cf334
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi
> > @@ -0,0 +1,51 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > + * Copyright (C) 2020 Matteo Scordino <matteo@xxxxxxxx>
> > + */
> > +
> > +/dts-v1/;
> > +#include "sun8i-v3.dtsi"
> > +#include "sunxi-common-regulators.dtsi"
> > +
> > +/ {
> > +	model = "Elimo Impetus SoM";
> > +	compatible = "elimo,impetus", "sochip,s3", "allwinner,sun8i-s3";
> 
> I'm wondering what to do about the SoC compatibles here:
> - Do we really need the "sochip,s3" compatible, as it seems redundant with
>   "allwinner,sun8i-s3"?
> - Could we add a "allwinner,sun8i-v3" compatible at the end since there is no
>   functional difference between the two?
> 
> Another thing is that we should probably add "allwinner,sun8i-v3" to
> mach-sunxi/sunxi.c so that it's matched by the DT_MACHINE_START.
> 
> If that seems agreeable, I can craft a patch for the latter.
> 
> What do you think?
> 
> The rest of the dt looks good to me :)
> 
> Cheers,
> 
> Paul
> 
> > +
> > +	aliases {
> > +		serial0 = &uart0;
> > +		serial1 = &uart1;
> > +	};
> > +
> > +	chosen {
> > +		stdout-path = "serial0:115200n8";
> > +	};
> > +};
> > +
> > +&mmc0 {
> > +	broken-cd;
> > +	bus-width = <4>;
> > +	vmmc-supply = <&reg_vcc3v3>;
> > +	status = "okay";
> > +};
> > +
> > +&uart0 {
> > +	pinctrl-0 = <&uart0_pb_pins>;
> > +	pinctrl-names = "default";
> > +	status = "okay";
> > +};
> > +
> > +&uart1 {
> > +	pinctrl-0 = <&uart1_pg_pins>;
> > +	pinctrl-names = "default";
> > +	status = "okay";
> > +};
> > +
> > +&usb_otg {
> > +	dr_mode = "otg";
> > +	status = "okay";
> > +};
> > +
> > +&usbphy {
> > +	usb0_id_det-gpio = <&pio 5 6 GPIO_ACTIVE_HIGH>;
> > +	status = "okay";
> > +};
> > -- 
> > 2.20.1
> > 
> > 
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Attachment: signature.asc
Description: This is a digitally signed message part