[PATCH] PCI: v3: fix missing clk_disable_unprepare() on error in v3_pci_probe

[Qinglang Miao]

Fix the missing clk_disable_unprepare() before return
from v3_pci_probe() in the error handling case.

Signed-off-by: Qinglang Miao <miaoqinglang@xxxxxxxxxx>
---
 drivers/pci/controller/pci-v3-semi.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/controller/pci-v3-semi.c b/drivers/pci/controller/pci-v3-semi.c
index 154a53986..e24abc5b4 100644
--- a/drivers/pci/controller/pci-v3-semi.c
+++ b/drivers/pci/controller/pci-v3-semi.c
@@ -739,8 +739,10 @@ static int v3_pci_probe(struct platform_device *pdev)
 
 	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	v3->base = devm_ioremap_resource(dev, regs);
-	if (IS_ERR(v3->base))
+	if (IS_ERR(v3->base)) {
+		clk_disable_unprepare(clk);
 		return PTR_ERR(v3->base);
+	}
 	/*
 	 * The hardware has a register with the physical base address
 	 * of the V3 controller itself, verify that this is the same
@@ -754,17 +756,22 @@ static int v3_pci_probe(struct platform_device *pdev)
 	regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 	if (resource_size(regs) != SZ_16M) {
 		dev_err(dev, "config mem is not 16MB!\n");
+		clk_disable_unprepare(clk);
 		return -EINVAL;
 	}
 	v3->config_mem = regs->start;
 	v3->config_base = devm_ioremap_resource(dev, regs);
-	if (IS_ERR(v3->config_base))
+	if (IS_ERR(v3->config_base)) {
+		clk_disable_unprepare(clk);
 		return PTR_ERR(v3->config_base);
+	}
 
 	/* Get and request error IRQ resource */
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0)
+	if (irq < 0) {
+		clk_disable_unprepare(clk);
 		return irq;
+	}
 
 	ret = devm_request_irq(dev, irq, v3_irq, 0,
 			"PCIv3 error", v3);
@@ -772,6 +779,7 @@ static int v3_pci_probe(struct platform_device *pdev)
 		dev_err(dev,
 			"unable to request PCIv3 error IRQ %d (%d)\n",
 			irq, ret);
+		clk_disable_unprepare(clk);
 		return ret;
 	}
 
-- 
2.23.0