[PATCH v2 00/12] Bug fixes and improvements for MHI power operations

[Bhaumik Bhatt]

v2:
-Addressed patches based on review comments and made improvements
-Added bus: mhi: core: Check for IRQ availability during registration
-Dropped bus: mhi: core: Use the IRQF_ONESHOT flag for the BHI interrupt line
-Split bus: mhi: core: Move to an error state on any firmware load failure
-Modified the following patches:
-bus: mhi: core: Disable IRQs when powering down
-bus: mhi: core: Improve shutdown handling after link down detection
-bus: mhi: core: Mark device inactive soon after host issues a shutdown
-bus: mhi: core: Move to SYS_ERROR regardless of RDDM capability
-Addressed the above as follow-up patches with improvements:
-bus: mhi: core: Prevent sending multiple RDDM entry callbacks
-bus: mhi: core: Separate system error and power down handling
-bus: mhi: core: Remove MHI event ring IRQ handlers when powering down

Bug fixes and improvements for MHI powerup and shutdown handling.
Firmware load function names are updated to accurately reflect their purpose.
Closed certain design gaps where the host (MHI bus) would allow clients to
operate after a power down or error detection.
Move to an error state sooner based on different scenarios.

These patches were tested on arm64 and X86_64 architectures.

Bhaumik Bhatt (12):
  bus: mhi: core: Use appropriate names for firmware load functions
  bus: mhi: core: Move to using high priority workqueue
  bus: mhi: core: Skip device wake in error or shutdown states
  bus: mhi: core: Move to SYS_ERROR regardless of RDDM capability
  bus: mhi: core: Prevent sending multiple RDDM entry callbacks
  bus: mhi: core: Move to an error state on any firmware load failure
  bus: mhi: core: Use appropriate label in firmware load handler API
  bus: mhi: core: Move to an error state on mission mode failure
  bus: mhi: core: Check for IRQ availability during registration
  bus: mhi: core: Separate system error and power down handling
  bus: mhi: core: Mark and maintain device states early on after power
    down
  bus: mhi: core: Remove MHI event ring IRQ handlers when powering down

 drivers/bus/mhi/core/boot.c |  60 ++++++-----
 drivers/bus/mhi/core/init.c |  10 +-
 drivers/bus/mhi/core/main.c |  16 +--
 drivers/bus/mhi/core/pm.c   | 236 ++++++++++++++++++++++++++++++++------------
 include/linux/mhi.h         |   2 +
 5 files changed, 225 insertions(+), 99 deletions(-)

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project