Re: [PATCH] kunit: tool: fix extra trailing \n in parsed test output

[David Gow]

On Fri, Oct 30, 2020 at 1:41 PM Daniel Latypov <dlatypov@xxxxxxxxxx> wrote:
>
> On Thu, Oct 29, 2020 at 7:34 PM David Gow <davidgow@xxxxxxxxxx> wrote:
> >
> > On Wed, Oct 21, 2020 at 7:32 AM Daniel Latypov <dlatypov@xxxxxxxxxx> wrote:
> > >
> > > For simplcity, strip all trailing whitespace from parsed output.
> > > I imagine no one is printing out meaningful trailing whitespace via
> > > KUNIT_FAIL() or similar, and that if they are, they really shouldn't.
> > >
> > > At some point, the lines from `isolate_kunit_output()` started having
> > > trailing \n, which results in artifacty output like this:
> > >
> > > $ ./tools/testing/kunit/kunit.py run
> > > [16:16:46] [FAILED] example_simple_test
> > > [16:16:46]     # example_simple_test: EXPECTATION FAILED at lib/kunit/kunit-example-test.c:29
> > >
> > > [16:16:46]     Expected 1 + 1 == 3, but
> > >
> > > [16:16:46]         1 + 1 == 2
> > >
> > > [16:16:46]         3 == 3
> > >
> > > [16:16:46]     not ok 1 - example_simple_test
> > >
> > > [16:16:46]
> > >
> > > After this change:
> > > [16:16:46]     # example_simple_test: EXPECTATION FAILED at lib/kunit/kunit-example-test.c:29
> > > [16:16:46]     Expected 1 + 1 == 3, but
> > > [16:16:46]         1 + 1 == 2
> > > [16:16:46]         3 == 3
> > > [16:16:46]     not ok 1 - example_simple_test
> > > [16:16:46]
> > >
> > > Signed-off-by: Daniel Latypov <dlatypov@xxxxxxxxxx>
> > > ---
> >
> > Thanks! This is a long-overdue fix, and it worked well for me.
> >
> > Tested-by: David Gow <davidgow@xxxxxxxxxx>
> >
> > One comment below:
> >
> > >  tools/testing/kunit/kunit_parser.py | 3 ++-
> > >  1 file changed, 2 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/tools/testing/kunit/kunit_parser.py b/tools/testing/kunit/kunit_parser.py
> > > index 8019e3dd4c32..e68b1c66a73f 100644
> > > --- a/tools/testing/kunit/kunit_parser.py
> > > +++ b/tools/testing/kunit/kunit_parser.py
> > > @@ -342,7 +342,8 @@ def parse_run_tests(kernel_output) -> TestResult:
> > >         total_tests = 0
> > >         failed_tests = 0
> > >         crashed_tests = 0
> > > -       test_result = parse_test_result(list(isolate_kunit_output(kernel_output)))
> > > +       test_result = parse_test_result(list(
> > > +            l.rstrip() for l in isolate_kunit_output(kernel_output)))
> >
> > Could we do this inside isolate_kunit_output() instead? That seems
> > like it'd be a more logical place for it (removing the newline is a
> > sort of isolating the output), and it'd avoid making this line quite
> > as horrifyingly nested.
>
> Good point.
> We could either do it on each yield (messy), or before, i.e.
>
> diff --git a/tools/testing/kunit/kunit_parser.py
> b/tools/testing/kunit/kunit_parser.py
> index 8019e3dd4c32..14d35deb96cd 100644
> --- a/tools/testing/kunit/kunit_parser.py
> +++ b/tools/testing/kunit/kunit_parser.py
> @@ -54,6 +54,7 @@ kunit_end_re = re.compile('(List of all partitions:|'
>  def isolate_kunit_output(kernel_output):
>         started = False
>         for line in kernel_output:
> +               line = line.rstrip()  # line always has a trailing \n
>                 if kunit_start_re.search(line):
>                         prefix_len = len(line.split('TAP version')[0])
>                         started = True
>
> I had some vague concerns about this as
>   kunit_start_re = re.compile(r'TAP version [0-9]+$')
> has that anchor at the end.
>
> This could ostensibly make it match more things than before.
> Since I'm using rstrip() out of laziness, that means strings like
>   '<prefix we allow for some reason>TAP version 42\t\n'
> will now also match.
>
> I don't really think that's an issue, but I'd sent this as a more
> conservative change initially.
> I can send the diff above as a replacement for this patch.

I prefer this if it works. From my cursory testing, it does (though
the kunt_tool_tests.py tests will need updating). At the very least,
I'm able to get it to work with --alltests / allyesconfig (with a few
options tactically disabled), which was the main reason we needed
isolate_kunit_output() in the first place.

So, unless anyone can find a real-world case where this breaks
something, let's go with this.

Cheers,
-- David

>
> >
> > >         if test_result.status == TestStatus.NO_TESTS:
> > >                 print(red('[ERROR] ') + yellow('no tests run!'))
> > >         elif test_result.status == TestStatus.FAILURE_TO_PARSE_TESTS:
> > >
> > > base-commit: c4d6fe7311762f2e03b3c27ad38df7c40c80cc93
> > > --
> > > 2.29.0.rc1.297.gfa9743e501-goog
> > >