[PATCH v5 06/11] arm64: dts: ls208xa: add the external MDIO nodes

[Ioana Ciornei]

From: Ioana Ciornei <ioana.ciornei@xxxxxxx>

Add the external MDIO device nodes found in the WRIOP global memory
region. This is needed for management of external PHYs.

Signed-off-by: Ioana Ciornei <ioana.ciornei@xxxxxxx>
---
Changes in v2:
 - removed the 0x from the unit addresses
Changes in v3:
 - none
Changes in v4:
 - none
Changes in v5:
 - used only lowercase letters for the address

 arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index bf72918fe545..4f59937793ef 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -458,6 +458,24 @@ ptp-timer@8b95000 {
 			fsl,extts-fifo;
 		};
 
+		emdio1: mdio@8b96000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8b96000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		emdio2: mdio@8b97000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8b97000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		fsl_mc: fsl-mc@80c000000 {
 			compatible = "fsl,qoriq-mc";
 			reg = <0x00000008 0x0c000000 0 0x40>,	 /* MC portal base */
-- 
2.28.0