[PATCH] pwm: lp3943: Dynamically allocate pwm chip base

[Lokesh Vutla]

When there are other pwm controllers enabled along with pwm-lp3943,
pwm-lp3942 is failing to probe with -EEXIST error. This is because
other pwm controller is probed first and assigned pwmchip 0 and
pwm-lp3943 is requesting for 0 again. In order to avoid this, assign the
chip base with -1, so that id is dynamically allocated.

Fixes: af66b3c0934e ("pwm: Add LP3943 PWM driver")
Signed-off-by: Lokesh Vutla <lokeshvutla@xxxxxx>
---
 drivers/pwm/pwm-lp3943.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pwm/pwm-lp3943.c b/drivers/pwm/pwm-lp3943.c
index 7551253ada32..bf3f14fb5f24 100644
--- a/drivers/pwm/pwm-lp3943.c
+++ b/drivers/pwm/pwm-lp3943.c
@@ -275,6 +275,7 @@ static int lp3943_pwm_probe(struct platform_device *pdev)
 	lp3943_pwm->chip.dev = &pdev->dev;
 	lp3943_pwm->chip.ops = &lp3943_pwm_ops;
 	lp3943_pwm->chip.npwm = LP3943_NUM_PWMS;
+	lp3943_pwm->chip.base = -1;
 
 	platform_set_drvdata(pdev, lp3943_pwm);
 
-- 
2.28.0