[PATCH net-next v3 0/4] DP83TD510 Single Pair 10Mbps Ethernet PHY

From: Dan Murphy
Date: Fri Oct 30 2020 - 13:30:03 EST


Hello

The DP83TD510 is an Ethernet PHY supporting single pair of twisted wires. The
PHY is capable of 10Mbps communication over long distances and exceeds the
IEEE 802.3cg 10BASE-T1L single-pair Ethernet specification. The PHY supports
various voltage level signalling and can be forced to support a specific
voltage or allowed to perfrom auto negotiation on the voltage level. The
default for the PHY is auto negotiation but if the PHY is forced to a specific
voltage then the LP must also support the same voltage.

Add the 10BASE-T1L linkmodes for ethtool to properly advertise the PHY's
capability.

Dan

Dan Murphy (4):
ethtool: Add 10base-T1L link mode entries
dt-bindings: net: Add Rx/Tx output configuration for 10base T1L
dt-bindings: dp83td510: Add binding for DP83TD510 Ethernet PHY
net: phy: dp83td510: Add support for the DP83TD510 Ethernet PHY

.../devicetree/bindings/net/ethernet-phy.yaml | 5 +
.../devicetree/bindings/net/ti,dp83td510.yaml | 62 ++
drivers/net/phy/Kconfig | 6 +
drivers/net/phy/Makefile | 1 +
drivers/net/phy/dp83td510.c | 681 ++++++++++++++++++
drivers/net/phy/phy-core.c | 4 +-
include/uapi/linux/ethtool.h | 2 +
net/ethtool/common.c | 2 +
net/ethtool/linkmodes.c | 2 +
9 files changed, 764 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/net/ti,dp83td510.yaml
create mode 100644 drivers/net/phy/dp83td510.c

--
2.28.0.585.ge1cfff676549