Re: [PATCH 1/2] dt-bindings: pinctrl: qcom: Add SDX55 pinctrl bindings

[Rob Herring]

On Wed, Oct 28, 2020 at 02:00:16PM +0530, Vinod Koul wrote:
> Add device tree binding Documentation details for Qualcomm SDX55
> pinctrl driver.
> 
> Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
> ---
>  .../bindings/pinctrl/qcom,sdx55-pinctrl.yaml  | 144 ++++++++++++++++++
>  1 file changed, 144 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
> new file mode 100644
> index 000000000000..2dd045a2fb03
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
> @@ -0,0 +1,144 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/qcom,sdx55-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Technologies, Inc. SDX55 TLMM block
> +
> +maintainers:
> +  - Vinod Koul <vkoul@xxxxxxxxxx>
> +
> +description: |
> +  This binding describes the Top Level Mode Multiplexer block found in the
> +  SDX55 platform.
> +
> +properties:
> +  compatible:
> +    const: qcom,sdx55-pinctrl
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    description: Specifies the TLMM summary IRQ
> +    maxItems: 1
> +
> +  interrupt-controller: true
> +
> +  '#interrupt-cells':
> +    description:
> +      Specifies the PIN numbers and Flags, as defined in defined in
> +      include/dt-bindings/interrupt-controller/irq.h
> +    const: 2
> +
> +  gpio-controller: true
> +
> +  '#gpio-cells':
> +    description: Specifying the pin number and flags, as defined in
> +      include/dt-bindings/gpio/gpio.h
> +    const: 2
> +
> +  gpio-ranges:
> +    maxItems: 1
> +
> +  wakeup-parent:
> +    maxItems: 1
> +
> +#PIN CONFIGURATION NODES
> +patternProperties:
> +  '^.*$':
> +    if:
> +      type: object
> +    then:

For new bindings, just name the nodes '-pins$' and forget this hack.

> +      properties:
> +        pins:
> +          description:
> +            List of gpio pins affected by the properties specified in this
> +            subnode.
> +          items:
> +            oneOf:
> +              - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$"
> +              - enum: [ ufs_reset, sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data ]
> +          minItems: 1
> +          maxItems: 36
> +
> +        function:
> +          description:
> +            Specify the alternative function to be configured for the specified
> +            pins.
> +
> +          enum: [ adsp_ext, atest, audio_ref, bimc_dte0, bimc_dte1, blsp_i2c1,
> +                  blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_spi1, blsp_spi2,
> +                  blsp_spi3, blsp_spi4, blsp_uart1, blsp_uart2, blsp_uart3,
> +                  blsp_uart4, char_exec, coex_uart, coex_uart2, cri_trng,
> +                  cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0,
> +                  ebi0_wrcdc, ebi2_a, ebi2_lcd, emac_gcc0, emac_gcc1,
> +                  emac_pps0, emac_pps1, ext_dbg, gcc_gp1, gcc_gp2, gcc_gp3,
> +                  gcc_plltest, gpio, i2s_mclk, jitter_bist, ldo_en, ldo_update,
> +                  mgpi_clk, m_voc, native_char, native_char0, native_char1,
> +                  native_char2, native_char3, native_tsens, native_tsense,
> +                  nav_gpio, pa_indicator, pcie_clkreq, pci_e, pll_bist, pll_ref,
> +                  pll_test, pri_mi2s, prng_rosc, qdss_cti, qdss_gpio,
> +                  qdss_gpio0, qdss_gpio1, qdss_gpio2, qdss_gpio3, qdss_gpio4,
> +                  qdss_gpio5, qdss_gpio6, qdss_gpio7, qdss_gpio8, qdss_gpio9,
> +                  qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13,
> +                  qdss_gpio14, qdss_gpio15, qdss_stm0, qdss_stm1, qdss_stm2,
> +                  qdss_stm3, qdss_stm4, qdss_stm5, qdss_stm6, qdss_stm7,
> +                  qdss_stm8, qdss_stm9, qdss_stm10, qdss_stm11, qdss_stm12,
> +                  qdss_stm13, qdss_stm14, qdss_stm15, qdss_stm16, qdss_stm17,
> +                  qdss_stm18, qdss_stm19, qdss_stm20, qdss_stm21, qdss_stm22,
> +                  qdss_stm23, qdss_stm24, qdss_stm25, qdss_stm26, qdss_stm27,
> +                  qdss_stm28, qdss_stm29, qdss_stm30, qdss_stm31, qlink0_en,
> +                  qlink0_req, qlink0_wmss, qlink1_en, qlink1_req, qlink1_wmss,
> +                  spmi_coex, sec_mi2s, spmi_vgi, tgu_ch0, uim1_clk, uim1_data,
> +                  uim1_present, uim1_reset, uim2_clk, uim2_data, uim2_present,
> +                  uim2_reset, usb2phy_ac, vsense_trigger ]
> +
> +        drive-strength:
> +          enum: [2, 4, 6, 8, 10, 12, 14, 16]
> +          default: 2
> +          description:
> +            Selects the drive strength for the specified pins, in mA.
> +
> +        bias-pull-down: true
> +
> +        bias-pull-up: true
> +
> +        bias-disable: true
> +
> +        output-high: true
> +
> +        output-low: true
> +
> +      required:
> +        - pins
> +        - function
> +
> +      additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - interrupt-controller
> +  - '#interrupt-cells'
> +  - gpio-controller
> +  - '#gpio-cells'
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +        #include <dt-bindings/interrupt-controller/arm-gic.h>
> +        pinctrl@1f00000 {
> +                compatible = "qcom,sdx55-pinctrl";
> +                reg = <0x0f100000 0x300000>;
> +                interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
> +                #interrupt-cells = <2>;
> +                interrupt-controller;
> +                gpio-controller;
> +                #gpio-cells = <2>;
> +        };
> +
> +...
> -- 
> 2.26.2
>