[PATCH v2 0/6] Elimo Impetus and Initium support - rework

[Matteo Scordino]

Hi,

I applied the suggestions from the discussion that stemmed from V1,
i.e.:

- using "sochip,s3", "allwinner,sun8i-v3" in the compatible string
- add a patch to do the same for the Pine64 PineCube
- alphabetic order in the dt-binding file
- match the dt-binding file with the actual dts files

Matteo Scordino (6):
  dt-bindings: vendors: add Elimo Engineering vendor prefix
  ARM: dts: sun8i: V3/S3: Add UART1 pin definitions to the V3/S3 dtsi
  ARM: dts: sun8i: s3: Add dtsi for the Elimo Impetus SoM
  dt-bindings: arm: sunxi: add Elimo bindings
  ARM: dts: sun8i: s3: Add dts for the Elimo Initium SBC
  ARM: dts: sunxi: align pinecube compatible property to other S3 boards

 .../devicetree/bindings/arm/sunxi.yaml        | 13 +++++
 .../devicetree/bindings/vendor-prefixes.yaml  |  2 +
 arch/arm/boot/dts/Makefile                    |  1 +
 arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi | 51 +++++++++++++++++++
 arch/arm/boot/dts/sun8i-s3-elimo-initium.dts  | 28 ++++++++++
 arch/arm/boot/dts/sun8i-s3-pinecube.dts       |  2 +-
 arch/arm/boot/dts/sun8i-v3.dtsi               |  5 ++
 7 files changed, 101 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi
 create mode 100644 arch/arm/boot/dts/sun8i-s3-elimo-initium.dts

-- 
2.20.1