[PATCH v2 5/6] ARM: dts: sun8i: s3: Add dts for the Elimo Initium SBC

[Matteo Scordino]

The Elimo Engineering Initium is an Open Source Hardware Single Board
Computer based on the Elimo Impetus SoM.

It is meant as the first development platform for the Impetus, providing
convenient access to the peripherals on the Impetus.

It provides:
USB-C power input
UART-to-USB bridge on the USB-C connector, connected to UART1
USB-A connector for USB2.0 (Host, Device, OTG)
Audio Line In/Out
Pin header to access all signals on the M2 connector of the SoM

Signed-off-by: Matteo Scordino <matteo.scordino@xxxxxxxxx>
---
 arch/arm/boot/dts/Makefile                   |  1 +
 arch/arm/boot/dts/sun8i-s3-elimo-initium.dts | 28 ++++++++++++++++++++
 2 files changed, 29 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun8i-s3-elimo-initium.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4f0adfead547..dcfb8d39c267 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1210,6 +1210,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-r40-bananapi-m2-ultra.dtb \
 	sun8i-s3-lichee-zero-plus.dtb \
 	sun8i-s3-pinecube.dtb \
+	sun8i-s3-elimo-initium.dtb \
 	sun8i-t3-cqa3t-bv3.dtb \
 	sun8i-v3s-licheepi-zero.dtb \
 	sun8i-v3s-licheepi-zero-dock.dtb \
diff --git a/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts b/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts
new file mode 100644
index 000000000000..7677ddc07bf9
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Matteo Scordino <matteo@xxxxxxxx>
+ */
+
+/dts-v1/;
+#include "sun8i-s3-elimo-impetus.dtsi"
+
+/ {
+	model = "Elimo Initium";
+	compatible = "elimo,initium", "elimo,impetus", "sochip,s3",
+    "allwinner,sun8i-v3";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	status = "okay";
+};
-- 
2.20.1