[PATCH net-next v2 14/19] net: phy: cicada: remove the use of .ack_interrupt()

[Ioana Ciornei]

From: Ioana Ciornei <ioana.ciornei@xxxxxxx>

In preparation of removing the .ack_interrupt() callback, we must replace
its occurrences (aka phy_clear_interrupt), from the 2 places where it is
called from (phy_enable_interrupts and phy_disable_interrupts), with
equivalent functionality.

This means that clearing interrupts now becomes something that the PHY
driver is responsible of doing, before enabling interrupts and after
clearing them. Make this driver follow the new contract.

Signed-off-by: Ioana Ciornei <ioana.ciornei@xxxxxxx>
---
Changes in v2:
 - none

 drivers/net/phy/cicada.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/net/phy/cicada.c b/drivers/net/phy/cicada.c
index 086c62ff5293..ef5f412e101f 100644
--- a/drivers/net/phy/cicada.c
+++ b/drivers/net/phy/cicada.c
@@ -87,11 +87,20 @@ static int cis820x_config_intr(struct phy_device *phydev)
 {
 	int err;
 
-	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		err = cis820x_ack_interrupt(phydev);
+		if (err)
+			return err;
+
 		err = phy_write(phydev, MII_CIS8201_IMASK,
 				MII_CIS8201_IMASK_MASK);
-	else
+	} else {
 		err = phy_write(phydev, MII_CIS8201_IMASK, 0);
+		if (err)
+			return err;
+
+		err = cis820x_ack_interrupt(phydev);
+	}
 
 	return err;
 }
@@ -122,7 +131,6 @@ static struct phy_driver cis820x_driver[] = {
 	.phy_id_mask	= 0x000ffff0,
 	/* PHY_GBIT_FEATURES */
 	.config_init	= &cis820x_config_init,
-	.ack_interrupt	= &cis820x_ack_interrupt,
 	.config_intr	= &cis820x_config_intr,
 	.handle_interrupt = &cis820x_handle_interrupt,
 }, {
@@ -131,7 +139,6 @@ static struct phy_driver cis820x_driver[] = {
 	.phy_id_mask	= 0x000fffc0,
 	/* PHY_GBIT_FEATURES */
 	.config_init	= &cis820x_config_init,
-	.ack_interrupt	= &cis820x_ack_interrupt,
 	.config_intr	= &cis820x_config_intr,
 	.handle_interrupt = &cis820x_handle_interrupt,
 } };
-- 
2.28.0