[PATCH] ACPI: Remove trailing whitespace

[Maximilian Luz]

Remove trailing whitespace and fix some whitespace inconsitencies while
at it.

Signed-off-by: Maximilian Luz <luzmaximilian@xxxxxxxxx>
---
 drivers/acpi/pci_irq.c           |  2 +-
 drivers/acpi/pci_link.c          | 12 ++++++------
 drivers/acpi/power.c             |  4 ++--
 drivers/acpi/processor_perflib.c |  4 ++--
 4 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index dea8a60e18a4..14ee631cb7cf 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -175,7 +175,7 @@ static int acpi_pci_irq_check_entry(acpi_handle handle, struct pci_dev *dev,
 	 * configure the IRQ assigned to this slot|dev|pin.  The 'source_index'
 	 * indicates which resource descriptor in the resource template (of
 	 * the link device) this interrupt is allocated from.
-	 * 
+	 *
 	 * NOTE: Don't query the Link Device for IRQ information at this time
 	 *       because Link Device enumeration may not have occurred yet
 	 *       (e.g. exists somewhere 'below' this _PRT entry in the ACPI
diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c
index 606da5d77ad3..fb4c5632a232 100644
--- a/drivers/acpi/pci_link.c
+++ b/drivers/acpi/pci_link.c
@@ -6,8 +6,8 @@
  *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@xxxxxxxxx>
  *  Copyright (C) 2002       Dominik Brodowski <devel@xxxxxxxx>
  *
- * TBD: 
- *      1. Support more than one IRQ resource entry per link device (index).
+ * TBD:
+ *	1. Support more than one IRQ resource entry per link device (index).
  *	2. Implement start/stop mechanism and use ACPI Bus Driver facilities
  *	   for IRQ management (e.g. start()->_SRS).
  */
@@ -249,8 +249,8 @@ static int acpi_pci_link_get_current(struct acpi_pci_link *link)
 		}
 	}
 
-	/* 
-	 * Query and parse _CRS to get the current IRQ assignment. 
+	/*
+	 * Query and parse _CRS to get the current IRQ assignment.
 	 */
 
 	status = acpi_walk_resources(link->device->handle, METHOD_NAME__CRS,
@@ -396,7 +396,7 @@ static int acpi_pci_link_set(struct acpi_pci_link *link, int irq)
 /*
  * "acpi_irq_balance" (default in APIC mode) enables ACPI to use PIC Interrupt
  * Link Devices to move the PIRQs around to minimize sharing.
- * 
+ *
  * "acpi_irq_nobalance" (default in PIC mode) tells ACPI not to move any PIC IRQs
  * that the BIOS has already set to active.  This is necessary because
  * ACPI has no automatic means of knowing what ISA IRQs are used.  Note that
@@ -414,7 +414,7 @@ static int acpi_pci_link_set(struct acpi_pci_link *link, int irq)
  *
  * Note that PCI IRQ routers have a list of possible IRQs,
  * which may not include the IRQs this table says are available.
- * 
+ *
  * Since this heuristic can't tell the difference between a link
  * that no device will attach to, vs. a link which may be shared
  * by multiple active devices -- it is not optimal.
diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c
index 837b875d075e..9c4c3196cb07 100644
--- a/drivers/acpi/power.c
+++ b/drivers/acpi/power.c
@@ -13,7 +13,7 @@
  * 1. via "Device Specific (D-State) Control"
  * 2. via "Power Resource Control".
  * The code below deals with ACPI Power Resources control.
- * 
+ *
  * An ACPI "power resource object" represents a software controllable power
  * plane, clock plane, or other resource depended on by a device.
  *
@@ -690,7 +690,7 @@ int acpi_device_sleep_wake(struct acpi_device *dev,
 
 /*
  * Prepare a wakeup device, two steps (Ref ACPI 2.0:P229):
- * 1. Power on the power resources required for the wakeup device 
+ * 1. Power on the power resources required for the wakeup device
  * 2. Execute _DSW (Device Sleep Wake) or (deprecated in ACPI 3.0) _PSW (Power
  *    State Wake) for the device, if present
  */
diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index 5909e8fa4013..f00e66de6c53 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -627,7 +627,7 @@ int acpi_processor_preregister_performance(
 		goto err_ret;
 
 	/*
-	 * Now that we have _PSD data from all CPUs, lets setup P-state 
+	 * Now that we have _PSD data from all CPUs, lets setup P-state
 	 * domain info.
 	 */
 	for_each_possible_cpu(i) {
@@ -693,7 +693,7 @@ int acpi_processor_preregister_performance(
 			if (match_pdomain->domain != pdomain->domain)
 				continue;
 
-			match_pr->performance->shared_type = 
+			match_pr->performance->shared_type =
 					pr->performance->shared_type;
 			cpumask_copy(match_pr->performance->shared_cpu_map,
 				     pr->performance->shared_cpu_map);
-- 
2.29.2