Re: [PATCH v4 2/2] interconnect: qcom: Add SDM660 interconnect provider driver

From: Georgi Djakov
Date: Tue Nov 03 2020 - 11:24:32 EST


On 10/17/20 16:37, kholk11@xxxxxxxxx wrote:
> From: AngeloGioacchino Del Regno <kholk11@xxxxxxxxx>
>
> Introduce a driver for the Qualcomm interconnect busses found in
> the SDM630/SDM636/SDM660 SoCs.
> The topology consists of several NoCs that are controlled by a
> remote processor that collects the aggregated bandwidth for each
> master-slave pairs.
>
> On a note, these chips are managing the "bus QoS" in a "hybrid"
> fashion: some of the paths in the topology are managed through
> (and by, of course) the RPM uC, while some others are "AP Owned",
> meaning that the AP shall do direct writes to the appropriate
> QoS registers for the specific paths and ports, instead of sending
> an indication to the RPM and leaving the job to that one.
>
> Signed-off-by: AngeloGioacchino Del Regno <kholk11@xxxxxxxxx>
> ---
> drivers/interconnect/qcom/Kconfig | 9 +
> drivers/interconnect/qcom/Makefile | 2 +
> drivers/interconnect/qcom/sdm660.c | 922 +++++++++++++++++++++++++++++
> 3 files changed, 933 insertions(+)
> create mode 100644 drivers/interconnect/qcom/sdm660.c
>
[..]> +static const struct of_device_id sdm660_noc_of_match[] = {
> + { .compatible = "qcom,sdm660-a2noc", .data = &sdm660_a2noc },
> + { .compatible = "qcom,sdm660-bimc", .data = &sdm660_bimc },
> + { .compatible = "qcom,sdm660-cnoc", .data = &sdm660_cnoc },
> + { .compatible = "qcom,sdm660-gnoc", .data = &sdm660_gnoc },
> + { .compatible = "qcom,sdm660-mnoc", .data = &sdm660_mnoc },
> + { .compatible = "qcom,sdm660-snoc", .data = &sdm660_snoc },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, sdm660_noc_of_match);
> +
> +static struct platform_driver sdm660_noc_driver = {
> + .probe = qnoc_probe,
> + .remove = qnoc_remove,
> + .driver = {
> + .name = "qnoc-sdm660",
> + .of_match_table = sdm660_noc_of_match,

Just noticed that here we should set the sync_state callback:
.sync_state = icc_sync_state,

I will fix it up before applying. Are you planning to send a patch
that adds the DT nodes?

Thanks,
Georgi

> + },
> +};
> +module_platform_driver(sdm660_noc_driver);
> +MODULE_DESCRIPTION("Qualcomm sdm660 NoC driver");
> +MODULE_LICENSE("GPL v2");