[PATCH 5.9 218/391] scsi: qla2xxx: Fix reset of MPI firmware

[Greg Kroah-Hartman]

From: Arun Easi <aeasi@xxxxxxxxxxx>

commit 3e6efab865ac943f4ec43913eb665695737112b0 upstream.

Normally, the MPI firmware is reset when an MPI dump is collected.  If an
unsaved MPI dump exists in the driver, though, an alternate mechanism is
used. This mechanism, which was not fully correct, is not recommended and
instead an MPI dump template walk is suggested to perform the MPI reset.

To allow for the MPI dump template walk, extra space is reserved in the MPI
dump buffer which gets used only when there is already an MPI dump in
place.

Link: https://lore.kernel.org/r/20200929102152.32278-5-njavali@xxxxxxxxxxx
Fixes: cbb01c2f2f63 ("scsi: qla2xxx: Fix MPI failure AEN (8200) handling")
Cc: stable@xxxxxxxxxxxxxxx
Reviewed-by: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
Signed-off-by: Arun Easi <aeasi@xxxxxxxxxxx>
Signed-off-by: Nilesh Javali <njavali@xxxxxxxxxxx>
Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/scsi/qla2xxx/qla_attr.c |   10 ++++++--
 drivers/scsi/qla2xxx/qla_gbl.h  |    1 
 drivers/scsi/qla2xxx/qla_init.c |    2 +
 drivers/scsi/qla2xxx/qla_tmpl.c |   49 ++++++++++------------------------------
 4 files changed, 23 insertions(+), 39 deletions(-)

--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -157,6 +157,14 @@ qla2x00_sysfs_write_fw_dump(struct file
 			       vha->host_no);
 		}
 		break;
+	case 10:
+		if (IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
+			ql_log(ql_log_info, vha, 0x70e9,
+			       "Issuing MPI firmware dump on host#%ld.\n",
+			       vha->host_no);
+			ha->isp_ops->mpi_fw_dump(vha, 0);
+		}
+		break;
 	}
 	return count;
 }
@@ -744,8 +752,6 @@ qla2x00_sysfs_write_reset(struct file *f
 			qla83xx_idc_audit(vha, IDC_AUDIT_TIMESTAMP);
 			qla83xx_idc_unlock(vha, 0);
 			break;
-		} else if (IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
-			qla27xx_reset_mpi(vha);
 		} else {
 			/* Make sure FC side is not in reset */
 			WARN_ON_ONCE(qla2x00_wait_for_hba_online(vha) !=
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -938,6 +938,5 @@ extern void qla24xx_process_purex_list(s
 
 /* nvme.c */
 void qla_nvme_unregister_remote_port(struct fc_port *fcport);
-void qla27xx_reset_mpi(scsi_qla_host_t *vha);
 void qla_handle_els_plogi_done(scsi_qla_host_t *vha, struct event_arg *ea);
 #endif /* _QLA_GBL_H */
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -3298,6 +3298,8 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *v
 			    j, fwdt->dump_size);
 			dump_size += fwdt->dump_size;
 		}
+		/* Add space for spare MPI fw dump. */
+		dump_size += ha->fwdt[1].dump_size;
 	} else {
 		req_q_size = req->length * sizeof(request_t);
 		rsp_q_size = rsp->length * sizeof(response_t);
--- a/drivers/scsi/qla2xxx/qla_tmpl.c
+++ b/drivers/scsi/qla2xxx/qla_tmpl.c
@@ -12,33 +12,6 @@
 #define IOBASE(vha)	IOBAR(ISPREG(vha))
 #define INVALID_ENTRY ((struct qla27xx_fwdt_entry *)0xffffffffffffffffUL)
 
-/* hardware_lock assumed held. */
-static void
-qla27xx_write_remote_reg(struct scsi_qla_host *vha,
-			 u32 addr, u32 data)
-{
-	struct device_reg_24xx __iomem *reg = &vha->hw->iobase->isp24;
-
-	ql_dbg(ql_dbg_misc, vha, 0xd300,
-	       "%s: addr/data = %xh/%xh\n", __func__, addr, data);
-
-	wrt_reg_dword(&reg->iobase_addr, 0x40);
-	wrt_reg_dword(&reg->iobase_c4, data);
-	wrt_reg_dword(&reg->iobase_window, addr);
-}
-
-void
-qla27xx_reset_mpi(scsi_qla_host_t *vha)
-{
-	ql_dbg(ql_dbg_misc + ql_dbg_verbose, vha, 0xd301,
-	       "Entered %s.\n", __func__);
-
-	qla27xx_write_remote_reg(vha, 0x104050, 0x40004);
-	qla27xx_write_remote_reg(vha, 0x10405c, 0x4);
-
-	vha->hw->stat.num_mpi_reset++;
-}
-
 static inline void
 qla27xx_insert16(uint16_t value, void *buf, ulong *len)
 {
@@ -1028,7 +1001,6 @@ void
 qla27xx_mpi_fwdump(scsi_qla_host_t *vha, int hardware_locked)
 {
 	ulong flags = 0;
-	bool need_mpi_reset = true;
 
 #ifndef __CHECKER__
 	if (!hardware_locked)
@@ -1036,14 +1008,20 @@ qla27xx_mpi_fwdump(scsi_qla_host_t *vha,
 #endif
 	if (!vha->hw->mpi_fw_dump) {
 		ql_log(ql_log_warn, vha, 0x02f3, "-> mpi_fwdump no buffer\n");
-	} else if (vha->hw->mpi_fw_dumped) {
-		ql_log(ql_log_warn, vha, 0x02f4,
-		       "-> MPI firmware already dumped (%p) -- ignoring request\n",
-		       vha->hw->mpi_fw_dump);
 	} else {
 		struct fwdt *fwdt = &vha->hw->fwdt[1];
 		ulong len;
 		void *buf = vha->hw->mpi_fw_dump;
+		bool walk_template_only = false;
+
+		if (vha->hw->mpi_fw_dumped) {
+			/* Use the spare area for any further dumps. */
+			buf += fwdt->dump_size;
+			walk_template_only = true;
+			ql_log(ql_log_warn, vha, 0x02f4,
+			       "-> MPI firmware already dumped -- dump saving to temporary buffer %p.\n",
+			       buf);
+		}
 
 		ql_log(ql_log_warn, vha, 0x02f5, "-> fwdt1 running...\n");
 		if (!fwdt->template) {
@@ -1058,9 +1036,10 @@ qla27xx_mpi_fwdump(scsi_qla_host_t *vha,
 			ql_log(ql_log_warn, vha, 0x02f7,
 			       "-> fwdt1 fwdump residual=%+ld\n",
 			       fwdt->dump_size - len);
-		} else {
-			need_mpi_reset = false;
 		}
+		vha->hw->stat.num_mpi_reset++;
+		if (walk_template_only)
+			goto bailout;
 
 		vha->hw->mpi_fw_dump_len = len;
 		vha->hw->mpi_fw_dumped = 1;
@@ -1072,8 +1051,6 @@ qla27xx_mpi_fwdump(scsi_qla_host_t *vha,
 	}
 
 bailout:
-	if (need_mpi_reset)
-		qla27xx_reset_mpi(vha);
 #ifndef __CHECKER__
 	if (!hardware_locked)
 		spin_unlock_irqrestore(&vha->hw->hardware_lock, flags);