[PATCH 01/15] usb: serial: ark3116: use usb_control_msg_recv() and usb_control_msg_send()

[Himadri Pandya]

The new usb_control_msg_recv() and usb_control_msg_send() nicely wraps
usb_control_msg() with proper error check. Hence use the wrappers
instead of calling usb_control_msg() directly.

Signed-off-by: Himadri Pandya <himadrispandya@xxxxxxxxx>
---
 drivers/usb/serial/ark3116.c | 29 ++++-------------------------
 1 file changed, 4 insertions(+), 25 deletions(-)

diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 71a9206ea1e2..51302892c779 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -77,38 +77,17 @@ struct ark3116_private {
 static int ark3116_write_reg(struct usb_serial *serial,
 			     unsigned reg, __u8 val)
 {
-	int result;
 	 /* 0xfe 0x40 are magic values taken from original driver */
-	result = usb_control_msg(serial->dev,
-				 usb_sndctrlpipe(serial->dev, 0),
-				 0xfe, 0x40, val, reg,
-				 NULL, 0, ARK_TIMEOUT);
-	if (result)
-		return result;
-
-	return 0;
+	return usb_control_msg_send(serial->dev, 0, 0xfe, 0x40, val, reg, NULL, 0,
+				    ARK_TIMEOUT, GFP_KERNEL);
 }
 
 static int ark3116_read_reg(struct usb_serial *serial,
 			    unsigned reg, unsigned char *buf)
 {
-	int result;
 	/* 0xfe 0xc0 are magic values taken from original driver */
-	result = usb_control_msg(serial->dev,
-				 usb_rcvctrlpipe(serial->dev, 0),
-				 0xfe, 0xc0, 0, reg,
-				 buf, 1, ARK_TIMEOUT);
-	if (result < 1) {
-		dev_err(&serial->interface->dev,
-				"failed to read register %u: %d\n",
-				reg, result);
-		if (result >= 0)
-			result = -EIO;
-
-		return result;
-	}
-
-	return 0;
+	return usb_control_msg_recv(serial->dev, 0, 0xfe, 0xc0, 0, reg, buf, 1,
+				    ARK_TIMEOUT, GFP_KERNEL);
 }
 
 static inline int calc_divisor(int bps)
-- 
2.17.1