[PATCH v3 00/24] wfx: get out from the staging area

From: Jerome Pouiller
Date: Wed Nov 04 2020 - 10:52:30 EST

Next message: Jerome Pouiller: "[PATCH v3 01/24] mmc: sdio: add SDIO IDs for Silabs WF200 chip"
Previous message: Lee Jones: "Re: [PATCH v4 2/4] mfd: Support ROHM BD9576MUF and BD9573MUF"
Next in thread: Jerome Pouiller: "[PATCH v3 01/24] mmc: sdio: add SDIO IDs for Silabs WF200 chip"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

From: Jérôme Pouiller <jerome.pouiller@xxxxxxxxxx>

I think the wfx driver is now mature enough to be accepted in the
drivers/net/wireless directory.

As requested by Kalle[1], I send one file per patch. At the end, all the
patches (or at least the patches 3 to 24) will be squashed (therefore, I
didn't bother to write real commit messages).

Here is a diagram of the global architecture that may help to understand
the code:

,------------------------------------.
| mac80211 |
`------------------------------------'
,------------+-----------+-----------.
| sta | | |
| scan | | |
| main | | |
+------------+ data_tx | |
| key | | data_rx |
| hif_tx_mib | queue | |
| hif_tx | | |
| hif_rx | | |
| hif_api_* | | |
+------------+-----------+-----------+--------.
| bh | fwio |
+------------------------------------+--------+
| hwio |
+---------------------------------------------+
| bus_sdio |
| bus_spi |
`---------------------------------------------'
,---------------------------------------------.
| spi / sdio |
`---------------------------------------------'

Roughly, I have sent the files from the bottom to the top.

Below the differences with the files from drivers/staging/wfx/:

v3:
- dt-bindings: Rename config-file property (Rob)
- dt-bindings: No additional properties are allowed (spi-max-frequency is
already listed) (Rob)
- dt-bindings: Remove references for mac-address properties (Rob)
- Rebase on staging/staging-next

v2:
- dt-bindings: Improve device description and add link to the datasheet
(Rob)
- dt-bindings: Add blank lines between each DT property (Rob)
- dt-bindings: Explicitly mention mac-address and local-mac-address and
add references to ethernet-controller.yaml (Rob)
- dt-bindings: "config-file" is not for development/debug (Rob)
- dt-bindings: Remove description of "spi-max-frequency" (Rob)
- dt-bindings: Use "folded scalar" syntax instead of escaping the colons
- bus_sdio.c: A compatible node in the DT is now mandatory to probe the
device. Also change documentation of dt-bindings accordingly (Pali,
Ulf)
- bus_sdio.c: Move SDIO IDs to sdio_ids.h (Pali)
- bh.c: Import patch "staging: wfx: fix test on return value of
gpiod_get_value()" (Nathan)
- data_tx.c: Import patch "staging: wfx: fix use of uninitialized
pointer"
- sta.c: Import patch "staging: wfx: make a const array static, makes
object smaller" (Colin)

v1:
- Drop the function name in the warning message (Kalle)
- Replace goto by return in wfx_send_pdata_pds() (Kalle, Dan)
- Improve error label in wfx_send_pdata_pds() (Kalle)

[1] https://lore.kernel.org/lkml/87ft6p2n0h.fsf@xxxxxxxxxxxxxx/

Jérôme Pouiller (24):
mmc: sdio: add SDIO IDs for Silabs WF200 chip
dt-bindings: introduce silabs,wfx.yaml
wfx: add Makefile/Kconfig
wfx: add wfx.h
wfx: add main.c/main.h
wfx: add bus.h
wfx: add bus_spi.c
wfx: add bus_sdio.c
wfx: add hwio.c/hwio.h
wfx: add fwio.c/fwio.h
wfx: add bh.c/bh.h
wfx: add hif_api_*.h
wfx: add hif_tx*.c/hif_tx*.h
wfx: add key.c/key.h
wfx: add hif_rx.c/hif_rx.h
wfx: add data_rx.c/data_rx.h
wfx: add queue.c/queue.h
wfx: add data_tx.c/data_tx.h
wfx: add sta.c/sta.h
wfx: add scan.c/scan.h
wfx: add debug.c/debug.h
wfx: add traces.h
wfx: remove from the staging area
wfx: get out from the staging area

.../bindings/net/wireless/silabs,wfx.yaml | 64 ++++++++++---------
MAINTAINERS | 3 +-
drivers/net/wireless/Kconfig | 1 +
drivers/net/wireless/Makefile | 1 +
drivers/net/wireless/silabs/Kconfig | 18 ++++++
drivers/net/wireless/silabs/Makefile | 3 +
.../wireless/silabs}/wfx/Kconfig | 0
.../wireless/silabs}/wfx/Makefile | 0
.../{staging => net/wireless/silabs}/wfx/bh.c | 0
.../{staging => net/wireless/silabs}/wfx/bh.h | 0
.../wireless/silabs}/wfx/bus.h | 0
.../wireless/silabs}/wfx/bus_sdio.c | 19 ++----
.../wireless/silabs}/wfx/bus_spi.c | 0
.../wireless/silabs}/wfx/data_rx.c | 0
.../wireless/silabs}/wfx/data_rx.h | 0
.../wireless/silabs}/wfx/data_tx.c | 2 +-
.../wireless/silabs}/wfx/data_tx.h | 0
.../wireless/silabs}/wfx/debug.c | 0
.../wireless/silabs}/wfx/debug.h | 0
.../wireless/silabs}/wfx/fwio.c | 0
.../wireless/silabs}/wfx/fwio.h | 0
.../wireless/silabs}/wfx/hif_api_cmd.h | 0
.../wireless/silabs}/wfx/hif_api_general.h | 0
.../wireless/silabs}/wfx/hif_api_mib.h | 0
.../wireless/silabs}/wfx/hif_rx.c | 0
.../wireless/silabs}/wfx/hif_rx.h | 0
.../wireless/silabs}/wfx/hif_tx.c | 0
.../wireless/silabs}/wfx/hif_tx.h | 0
.../wireless/silabs}/wfx/hif_tx_mib.c | 0
.../wireless/silabs}/wfx/hif_tx_mib.h | 0
.../wireless/silabs}/wfx/hwio.c | 0
.../wireless/silabs}/wfx/hwio.h | 0
.../wireless/silabs}/wfx/key.c | 0
.../wireless/silabs}/wfx/key.h | 0
.../wireless/silabs}/wfx/main.c | 9 ++-
.../wireless/silabs}/wfx/main.h | 0
.../wireless/silabs}/wfx/queue.c | 0
.../wireless/silabs}/wfx/queue.h | 0
.../wireless/silabs}/wfx/scan.c | 0
.../wireless/silabs}/wfx/scan.h | 0
.../wireless/silabs}/wfx/sta.c | 0
.../wireless/silabs}/wfx/sta.h | 0
.../wireless/silabs}/wfx/traces.h | 0
.../wireless/silabs}/wfx/wfx.h | 0
drivers/staging/Kconfig | 2 -
drivers/staging/Makefile | 1 -
drivers/staging/wfx/TODO | 6 --
include/linux/mmc/sdio_ids.h | 5 ++
48 files changed, 74 insertions(+), 60 deletions(-)
rename {drivers/staging/wfx/Documentation => Documentation}/devicetree/bindings/net/wireless/silabs,wfx.yaml (73%)
create mode 100644 drivers/net/wireless/silabs/Kconfig
create mode 100644 drivers/net/wireless/silabs/Makefile
rename drivers/{staging => net/wireless/silabs}/wfx/Kconfig (100%)
rename drivers/{staging => net/wireless/silabs}/wfx/Makefile (100%)
rename drivers/{staging => net/wireless/silabs}/wfx/bh.c (100%)
rename drivers/{staging => net/wireless/silabs}/wfx/bh.h (100%)
rename drivers/{staging => net/wireless/silabs}/wfx/bus.h (100%)
rename drivers/{staging => net/wireless/silabs}/wfx/bus_sdio.c (91%)
rename drivers/{staging => net/wireless/silabs}/wfx/bus_spi.c (100%)
rename drivers/{staging => net/wireless/silabs}/wfx/data_rx.c (100%)
rename drivers/{staging => net/wireless/silabs}/wfx/data_rx.h (100%)
rename drivers/{staging => net/wireless/silabs}/wfx/data_tx.c (99%)
rename drivers/{staging => net/wireless/silabs}/wfx/data_tx.h (100%)
rename drivers/{staging => net/wireless/silabs}/wfx/debug.c (100%)
rename drivers/{staging => net/wireless/silabs}/wfx/debug.h (100%)
rename drivers/{staging => net/wireless/silabs}/wfx/fwio.c (100%)
rename drivers/{staging => net/wireless/silabs}/wfx/fwio.h (100%)
rename drivers/{staging => net/wireless/silabs}/wfx/hif_api_cmd.h (100%)
rename drivers/{staging => net/wireless/silabs}/wfx/hif_api_general.h (100%)
rename drivers/{staging => net/wireless/silabs}/wfx/hif_api_mib.h (100%)
rename drivers/{staging => net/wireless/silabs}/wfx/hif_rx.c (100%)
rename drivers/{staging => net/wireless/silabs}/wfx/hif_rx.h (100%)
rename drivers/{staging => net/wireless/silabs}/wfx/hif_tx.c (100%)
rename drivers/{staging => net/wireless/silabs}/wfx/hif_tx.h (100%)
rename drivers/{staging => net/wireless/silabs}/wfx/hif_tx_mib.c (100%)
rename drivers/{staging => net/wireless/silabs}/wfx/hif_tx_mib.h (100%)
rename drivers/{staging => net/wireless/silabs}/wfx/hwio.c (100%)
rename drivers/{staging => net/wireless/silabs}/wfx/hwio.h (100%)
rename drivers/{staging => net/wireless/silabs}/wfx/key.c (100%)
rename drivers/{staging => net/wireless/silabs}/wfx/key.h (100%)
rename drivers/{staging => net/wireless/silabs}/wfx/main.c (99%)
rename drivers/{staging => net/wireless/silabs}/wfx/main.h (100%)
rename drivers/{staging => net/wireless/silabs}/wfx/queue.c (100%)
rename drivers/{staging => net/wireless/silabs}/wfx/queue.h (100%)
rename drivers/{staging => net/wireless/silabs}/wfx/scan.c (100%)
rename drivers/{staging => net/wireless/silabs}/wfx/scan.h (100%)
rename drivers/{staging => net/wireless/silabs}/wfx/sta.c (100%)
rename drivers/{staging => net/wireless/silabs}/wfx/sta.h (100%)
rename drivers/{staging => net/wireless/silabs}/wfx/traces.h (100%)
rename drivers/{staging => net/wireless/silabs}/wfx/wfx.h (100%)
delete mode 100644 drivers/staging/wfx/TODO

--
2.28.0

Next message: Jerome Pouiller: "[PATCH v3 01/24] mmc: sdio: add SDIO IDs for Silabs WF200 chip"
Previous message: Lee Jones: "Re: [PATCH v4 2/4] mfd: Support ROHM BD9576MUF and BD9573MUF"
Next in thread: Jerome Pouiller: "[PATCH v3 01/24] mmc: sdio: add SDIO IDs for Silabs WF200 chip"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]