[PATCH] arm64: dts: rockchip: Reorder LED triggers from mmc devices on rk3399-roc-pc.

[Markus Reichl]

After patch [1] SD-card becomes mmc1 and eMMC becomes mmc2.
Correct trigger of LEDs accordingly.

[1]
https://patchwork.kernel.org/patch/11881427

Signed-off-by: Markus Reichl <m.reichl@xxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
index e7a459fa4322..20309076dbac 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
@@ -74,14 +74,14 @@ diy_led: led-1 {
 			label = "red:diy";
 			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
-			linux,default-trigger = "mmc1";
+			linux,default-trigger = "mmc2";
 		};
 
 		yellow_led: led-2 {
 			label = "yellow:yellow-led";
 			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
-			linux,default-trigger = "mmc0";
+			linux,default-trigger = "mmc1";
 		};
 	};
 
-- 
2.28.0