[PATCH 2/3] drivers/irqchip: Remove EZChip NPS interrupt controller

From: Vineet Gupta
Date: Thu Nov 05 2020 - 16:22:34 EST


NPS platform has been removed from ARC port and there are no in-tree
users of it now. So RIP !

Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Jason Cooper <jason@xxxxxxxxxxxxxx>
Cc: Marc Zyngier <maz@xxxxxxxxxx>
Cc: linux-kernel@xxxxxxxxxxxxxxx
Signed-off-by: Vineet Gupta <vgupta@xxxxxxxxxxxx>
---
drivers/irqchip/Kconfig | 7 --
drivers/irqchip/Makefile | 1 -
drivers/irqchip/irq-eznps.c | 165 ------------------------------------
3 files changed, 173 deletions(-)
delete mode 100644 drivers/irqchip/irq-eznps.c

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index c6098eee0c7c..7920c3a3017d 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -389,13 +389,6 @@ config LS_SCFG_MSI
config PARTITION_PERCPU
bool

-config EZNPS_GIC
- bool "NPS400 Global Interrupt Manager (GIM)"
- depends on ARC || (COMPILE_TEST && !64BIT)
- select IRQ_DOMAIN
- help
- Support the EZchip NPS400 global interrupt controller
-
config STM32_EXTI
bool
select IRQ_DOMAIN
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 94c2885882ee..0ac93bfaec61 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -86,7 +86,6 @@ obj-$(CONFIG_MVEBU_PIC) += irq-mvebu-pic.o
obj-$(CONFIG_MVEBU_SEI) += irq-mvebu-sei.o
obj-$(CONFIG_LS_EXTIRQ) += irq-ls-extirq.o
obj-$(CONFIG_LS_SCFG_MSI) += irq-ls-scfg-msi.o
-obj-$(CONFIG_EZNPS_GIC) += irq-eznps.o
obj-$(CONFIG_ARCH_ASPEED) += irq-aspeed-vic.o irq-aspeed-i2c-ic.o irq-aspeed-scu-ic.o
obj-$(CONFIG_STM32_EXTI) += irq-stm32-exti.o
obj-$(CONFIG_QCOM_IRQ_COMBINER) += qcom-irq-combiner.o
diff --git a/drivers/irqchip/irq-eznps.c b/drivers/irqchip/irq-eznps.c
deleted file mode 100644
index 2a7a38830a8d..000000000000
--- a/drivers/irqchip/irq-eznps.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * Copyright (c) 2016, Mellanox Technologies. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/irqchip.h>
-#include <soc/nps/common.h>
-
-#define NPS_NR_CPU_IRQS 8 /* number of interrupt lines of NPS400 CPU */
-#define NPS_TIMER0_IRQ 3
-
-/*
- * NPS400 core includes an Interrupt Controller (IC) support.
- * All cores can deactivate level irqs at first level control
- * at cores mesh layer called MTM.
- * For devices out side chip e.g. uart, network there is another
- * level called Global Interrupt Manager (GIM).
- * This second level can control level and edge interrupt.
- *
- * NOTE: AUX_IENABLE and CTOP_AUX_IACK are auxiliary registers
- * with private HW copy per CPU.
- */
-
-static void nps400_irq_mask(struct irq_data *irqd)
-{
- unsigned int ienb;
- unsigned int irq = irqd_to_hwirq(irqd);
-
- ienb = read_aux_reg(AUX_IENABLE);
- ienb &= ~(1 << irq);
- write_aux_reg(AUX_IENABLE, ienb);
-}
-
-static void nps400_irq_unmask(struct irq_data *irqd)
-{
- unsigned int ienb;
- unsigned int irq = irqd_to_hwirq(irqd);
-
- ienb = read_aux_reg(AUX_IENABLE);
- ienb |= (1 << irq);
- write_aux_reg(AUX_IENABLE, ienb);
-}
-
-static void nps400_irq_eoi_global(struct irq_data *irqd)
-{
- unsigned int __maybe_unused irq = irqd_to_hwirq(irqd);
-
- write_aux_reg(CTOP_AUX_IACK, 1 << irq);
-
- /* Don't ack GIC before all device access attempts are done */
- mb();
-
- nps_ack_gic();
-}
-
-static void nps400_irq_ack(struct irq_data *irqd)
-{
- unsigned int __maybe_unused irq = irqd_to_hwirq(irqd);
-
- write_aux_reg(CTOP_AUX_IACK, 1 << irq);
-}
-
-static struct irq_chip nps400_irq_chip_fasteoi = {
- .name = "NPS400 IC Global",
- .irq_mask = nps400_irq_mask,
- .irq_unmask = nps400_irq_unmask,
- .irq_eoi = nps400_irq_eoi_global,
-};
-
-static struct irq_chip nps400_irq_chip_percpu = {
- .name = "NPS400 IC",
- .irq_mask = nps400_irq_mask,
- .irq_unmask = nps400_irq_unmask,
- .irq_ack = nps400_irq_ack,
-};
-
-static int nps400_irq_map(struct irq_domain *d, unsigned int virq,
- irq_hw_number_t hw)
-{
- switch (hw) {
- case NPS_TIMER0_IRQ:
-#ifdef CONFIG_SMP
- case NPS_IPI_IRQ:
-#endif
- irq_set_percpu_devid(virq);
- irq_set_chip_and_handler(virq, &nps400_irq_chip_percpu,
- handle_percpu_devid_irq);
- break;
- default:
- irq_set_chip_and_handler(virq, &nps400_irq_chip_fasteoi,
- handle_fasteoi_irq);
- break;
- }
-
- return 0;
-}
-
-static const struct irq_domain_ops nps400_irq_ops = {
- .xlate = irq_domain_xlate_onecell,
- .map = nps400_irq_map,
-};
-
-static int __init nps400_of_init(struct device_node *node,
- struct device_node *parent)
-{
- struct irq_domain *nps400_root_domain;
-
- if (parent) {
- pr_err("DeviceTree incore ic not a root irq controller\n");
- return -EINVAL;
- }
-
- nps400_root_domain = irq_domain_add_linear(node, NPS_NR_CPU_IRQS,
- &nps400_irq_ops, NULL);
-
- if (!nps400_root_domain) {
- pr_err("nps400 root irq domain not avail\n");
- return -ENOMEM;
- }
-
- /*
- * Needed for primary domain lookup to succeed
- * This is a primary irqchip, and can never have a parent
- */
- irq_set_default_host(nps400_root_domain);
-
-#ifdef CONFIG_SMP
- irq_create_mapping(nps400_root_domain, NPS_IPI_IRQ);
-#endif
-
- return 0;
-}
-IRQCHIP_DECLARE(ezchip_nps400_ic, "ezchip,nps400-ic", nps400_of_init);
--
2.25.1