Re: [PATCH v5 2/2] firmware: QCOM_SCM: Allow qcom_scm driver to be loadable as a permenent module

[Bjorn Andersson]

On Fri 30 Oct 19:38 CDT 2020, John Stultz wrote:

> Allow the qcom_scm driver to be loadable as a permenent module.
> 
> This still uses the "depends on QCOM_SCM || !QCOM_SCM" bit to
> ensure that drivers that call into the qcom_scm driver are
> also built as modules. While not ideal in some cases its the
> only safe way I can find to avoid build errors without having
> those drivers select QCOM_SCM and have to force it on (as
> QCOM_SCM=n can be valid for those drivers).
> 
> Cc: Catalin Marinas <catalin.marinas@xxxxxxx>
> Cc: Will Deacon <will@xxxxxxxxxx>
> Cc: Andy Gross <agross@xxxxxxxxxx>
> Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> Cc: Joerg Roedel <joro@xxxxxxxxxx>
> Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
> Cc: Jason Cooper <jason@xxxxxxxxxxxxxx>
> Cc: Marc Zyngier <maz@xxxxxxxxxx>
> Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
> Cc: Vinod Koul <vkoul@xxxxxxxxxx>
> Cc: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
> Cc: Maulik Shah <mkshah@xxxxxxxxxxxxxx>
> Cc: Lina Iyer <ilina@xxxxxxxxxxxxxx>
> Cc: Saravana Kannan <saravanak@xxxxxxxxxx>
> Cc: Todd Kjos <tkjos@xxxxxxxxxx>
> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
> Cc: linux-arm-msm@xxxxxxxxxxxxxxx
> Cc: iommu@xxxxxxxxxxxxxxxxxxxxxxxxxx
> Cc: linux-gpio@xxxxxxxxxxxxxxx
> Acked-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
> Signed-off-by: John Stultz <john.stultz@xxxxxxxxxx>

Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

Regards,
Bjorn

> ---
> v3:
> * Fix __arm_smccc_smc build issue reported by
>   kernel test robot <lkp@xxxxxxxxx>
> v4:
> * Add "depends on QCOM_SCM || !QCOM_SCM" bit to ath10k
>   config that requires it.
> v5:
> * Fix QCOM_QCM typo in Kconfig, it should be QCOM_SCM
> ---
>  drivers/firmware/Kconfig                | 4 ++--
>  drivers/firmware/Makefile               | 3 ++-
>  drivers/firmware/qcom_scm.c             | 4 ++++
>  drivers/iommu/Kconfig                   | 2 ++
>  drivers/net/wireless/ath/ath10k/Kconfig | 1 +
>  5 files changed, 11 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
> index 3315e3c215864..5e369928bc567 100644
> --- a/drivers/firmware/Kconfig
> +++ b/drivers/firmware/Kconfig
> @@ -235,8 +235,8 @@ config INTEL_STRATIX10_RSU
>  	  Say Y here if you want Intel RSU support.
>  
>  config QCOM_SCM
> -	bool
> -	depends on ARM || ARM64
> +	tristate "Qcom SCM driver"
> +	depends on (ARM && HAVE_ARM_SMCCC) || ARM64
>  	select RESET_CONTROLLER
>  
>  config QCOM_SCM_DOWNLOAD_MODE_DEFAULT
> diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
> index 5e013b6a3692e..523173cbff335 100644
> --- a/drivers/firmware/Makefile
> +++ b/drivers/firmware/Makefile
> @@ -17,7 +17,8 @@ obj-$(CONFIG_ISCSI_IBFT)	+= iscsi_ibft.o
>  obj-$(CONFIG_FIRMWARE_MEMMAP)	+= memmap.o
>  obj-$(CONFIG_RASPBERRYPI_FIRMWARE) += raspberrypi.o
>  obj-$(CONFIG_FW_CFG_SYSFS)	+= qemu_fw_cfg.o
> -obj-$(CONFIG_QCOM_SCM)		+= qcom_scm.o qcom_scm-smc.o qcom_scm-legacy.o
> +obj-$(CONFIG_QCOM_SCM)		+= qcom-scm.o
> +qcom-scm-objs += qcom_scm.o qcom_scm-smc.o qcom_scm-legacy.o
>  obj-$(CONFIG_TI_SCI_PROTOCOL)	+= ti_sci.o
>  obj-$(CONFIG_TRUSTED_FOUNDATIONS) += trusted_foundations.o
>  obj-$(CONFIG_TURRIS_MOX_RWTM)	+= turris-mox-rwtm.o
> diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
> index 7be48c1bec96d..6f431b73e617d 100644
> --- a/drivers/firmware/qcom_scm.c
> +++ b/drivers/firmware/qcom_scm.c
> @@ -1280,6 +1280,7 @@ static const struct of_device_id qcom_scm_dt_match[] = {
>  	{ .compatible = "qcom,scm" },
>  	{}
>  };
> +MODULE_DEVICE_TABLE(of, qcom_scm_dt_match);
>  
>  static struct platform_driver qcom_scm_driver = {
>  	.driver = {
> @@ -1295,3 +1296,6 @@ static int __init qcom_scm_init(void)
>  	return platform_driver_register(&qcom_scm_driver);
>  }
>  subsys_initcall(qcom_scm_init);
> +
> +MODULE_DESCRIPTION("Qualcomm Technologies, Inc. SCM driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
> index 04878caf6da49..c64d7a2b65134 100644
> --- a/drivers/iommu/Kconfig
> +++ b/drivers/iommu/Kconfig
> @@ -248,6 +248,7 @@ config SPAPR_TCE_IOMMU
>  config ARM_SMMU
>  	tristate "ARM Ltd. System MMU (SMMU) Support"
>  	depends on ARM64 || ARM || (COMPILE_TEST && !GENERIC_ATOMIC64)
> +	depends on QCOM_SCM || !QCOM_SCM #if QCOM_SCM=m this can't be =y
>  	select IOMMU_API
>  	select IOMMU_IO_PGTABLE_LPAE
>  	select ARM_DMA_USE_IOMMU if ARM
> @@ -375,6 +376,7 @@ config QCOM_IOMMU
>  	# Note: iommu drivers cannot (yet?) be built as modules
>  	bool "Qualcomm IOMMU Support"
>  	depends on ARCH_QCOM || (COMPILE_TEST && !GENERIC_ATOMIC64)
> +	depends on QCOM_SCM=y
>  	select IOMMU_API
>  	select IOMMU_IO_PGTABLE_LPAE
>  	select ARM_DMA_USE_IOMMU
> diff --git a/drivers/net/wireless/ath/ath10k/Kconfig b/drivers/net/wireless/ath/ath10k/Kconfig
> index 40f91bc8514d8..741289e385d59 100644
> --- a/drivers/net/wireless/ath/ath10k/Kconfig
> +++ b/drivers/net/wireless/ath/ath10k/Kconfig
> @@ -44,6 +44,7 @@ config ATH10K_SNOC
>  	tristate "Qualcomm ath10k SNOC support"
>  	depends on ATH10K
>  	depends on ARCH_QCOM || COMPILE_TEST
> +	depends on QCOM_SCM || !QCOM_SCM #if QCOM_SCM=m this can't be =y
>  	select QCOM_QMI_HELPERS
>  	help
>  	  This module adds support for integrated WCN3990 chip connected
> -- 
> 2.17.1
>