[RFC PATCH 3/3] ARM: dts: qcom: msm8974-hammerhead: Add support for the flash LED
From: Nícolas F. R. A. Prado
Date: Fri Nov 06 2020 - 11:59:38 EST
Add the necessary device tree nodes for the flash LED.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxxx>
---
.../qcom-msm8974-lge-nexus5-hammerhead.dts | 56 +++++++++++++++++++
1 file changed, 56 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index 32b474bfeec3..6aa93c236178 100644
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -730,4 +730,60 @@ otg {
};
};
};
+ pm8941@1 {
+ qcom,leds@d300 {
+ status = "ok";
+
+ compatible = "qcom,leds-qpnp";
+ reg = <0xd300 0x100>;
+ label = "flash";
+ flash-boost-supply = <&pm8941_5vs1>;
+ torch-boost-supply = <&pm8941_5v>;
+ pm8941_flash0: qcom,flash_0 {
+ qcom,max-current = <1000>;
+ qcom,default-state = "off";
+ qcom,headroom = <3>;
+ qcom,duration = <1280>;
+ qcom,clamp-curr = <200>;
+ qcom,startup-dly = <3>;
+ qcom,safety-timer;
+ label = "flash";
+ linux,default-trigger =
+ "flash0_trigger";
+ qcom,id = <1>;
+ linux,name = "led:flash_0";
+ qcom,current = <620>;
+ };
+
+ pm8941_flash1: qcom,flash_1 {
+ qcom,max-current = <1000>;
+ qcom,default-state = "off";
+ qcom,headroom = <3>;
+ qcom,duration = <1280>;
+ qcom,clamp-curr = <200>;
+ qcom,startup-dly = <3>;
+ qcom,safety-timer;
+ linux,default-trigger =
+ "flash1_trigger";
+ label = "flash";
+ qcom,id = <2>;
+ linux,name = "led:flash_1";
+ qcom,current = <620>;
+ };
+
+ pm8941_torch: qcom,flash_torch {
+ qcom,max-current = <200>;
+ qcom,default-state = "off";
+ qcom,headroom = <0>;
+ qcom,startup-dly = <1>;
+ linux,default-trigger =
+ "torch_trigger";
+ label = "flash";
+ qcom,id = <2>;
+ linux,name = "led:flash_torch";
+ qcom,current = <90>;
+ qcom,torch-enable;
+ };
+ };
+ };
};
--
2.29.2