[PATCH] docs: networking: phy: s/2.5 times faster/2.5 times as fast/

[Jonathan Neuschäfer]

2.5 times faster would be 3.5 Gbps (4.375 Gbaud after 8b/10b encoding).

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
---
 Documentation/networking/phy.rst | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/networking/phy.rst b/Documentation/networking/phy.rst
index 256106054c8cb..b2f7ec794bc8b 100644
--- a/Documentation/networking/phy.rst
+++ b/Documentation/networking/phy.rst
@@ -247,8 +247,8 @@ Some of the interface modes are described below:
     speeds (see below.)

 ``PHY_INTERFACE_MODE_2500BASEX``
-    This defines a variant of 1000BASE-X which is clocked 2.5 times faster,
-    than the 802.3 standard giving a fixed bit rate of 3.125Gbaud.
+    This defines a variant of 1000BASE-X which is clocked 2.5 times as fast
+    as the 802.3 standard, giving a fixed bit rate of 3.125Gbaud.

 ``PHY_INTERFACE_MODE_SGMII``
     This is used for Cisco SGMII, which is a modification of 1000BASE-X
--
2.28.0