Re: [PATCH v3] hwmon: Add driver for STMicroelectronics PM6764 Voltage Regulator

[Guenter Roeck]

On 11/9/20 12:41 AM, Charles wrote:
> Add the pmbus driver for the STMicroelectronics pm6764 voltage regulator.
> 
> the output voltage use the MFR_READ_VOUT 0xD4
> vout value returned is linear11
> 
> Signed-off-by: Charles Hsu <hsu.yungteng@xxxxxxxxx>
> ---

No idea what happened, but the patch is corrupted and does not apply.
I would suggest to try to apply it yourself before sending it out.

> v3:
>  - Add Documentation(Documentation/hwmon/pm6764tr.rst).
>  - Fix include order.
> v2:
>  - Fix formatting.
>  - Remove pmbus_do_remove.
>  - Change from .probe to .probe_new. 
> v1:
>  - Initial patchset.
> ---
>  Documentation/hwmon/pm6764tr.rst | 30 ++++++++++++

That also needs to be added to
Documentation/hwmon/index.rst.

>  drivers/hwmon/pmbus/Kconfig      |  9 ++++
>  drivers/hwmon/pmbus/Makefile     |  1 +
>  drivers/hwmon/pmbus/pm6764tr.c   | 78 ++++++++++++++++++++++++++++++++
>  4 files changed, 118 insertions(+)
>  create mode 100644 Documentation/hwmon/pm6764tr.rst
>  create mode 100644 drivers/hwmon/pmbus/pm6764tr.c
> 
> diff --git a/Documentation/hwmon/pm6764tr.rst b/Documentation/hwmon/pm6764tr.rst
> new file mode 100644
> index 000000000000..8491b9dde1cb
> --- /dev/null
> +++ b/Documentation/hwmon/pm6764tr.rst
> @@ -0,0 +1,30 @@

SPDX license missing

> +Kernel driver pm6764tr
> +=====================

One more '='

> +
> +Supported chips:
> +
> +  * ST PM6764TR
> +
> +    Prefix: 'pm6764tr'
> +
> +    Addresses scanned: -
> +
> +    Datasheet: http://www.st.com/resource/en/data_brief/pm6764.pdf

Add empty line

> +Authors:
> +	<hsu.yungteng@xxxxxxxxx>
> +
> +Description:
> +------------
> +
> +This driver supports the STMicroelectronics PM6764TR chip. The PM6764TR is a high
> +performance digital controller designed to power Intel’s VR12.5 processors and memories.
> +
> +The device utilizes digital technology to implement all control and power management
> +functions to provide maximum flexibility and performance. The NVM is embedded to store
> +custom configurations. The PM6764TR device features up to 4-phase programmable operation.
> +
> +The PM6764TR supports power state transitions featuring VFDE, and programmable DPM
> +maintaining the best efficiency over all loading conditions without compromising transient
> +response. The device assures fast and independent protectionagainstload overcurrent,
> +under/overvoltage and feedback disconnections.
> +
> diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
> index a25faf69fce3..9c846facce9f 100644
> --- a/drivers/hwmon/pmbus/Kconfig
> +++ b/drivers/hwmon/pmbus/Kconfig
> @@ -220,6 +220,15 @@ config SENSORS_MP2975
>  	  This driver can also be built as a module. If so, the module will
>  	  be called mp2975.
>  
> +config SENSORS_PM6764TR
> +	tristate "ST PM6764TR"
> +	help
> +	  If you say yes here you get hardware monitoring support for ST
> +	  PM6764TR.
> +
> +	  This driver can also be built as a module. If so, the module will
> +	  be called pm6764tr.
> +
>  config SENSORS_PXE1610
>  	tristate "Infineon PXE1610"
>  	help
> diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
> index 4c97ad0bd791..31ebdef5d4a6 100644
> --- a/drivers/hwmon/pmbus/Makefile
> +++ b/drivers/hwmon/pmbus/Makefile
> @@ -25,6 +25,7 @@ obj-$(CONFIG_SENSORS_MAX31785)	+= max31785.o
>  obj-$(CONFIG_SENSORS_MAX34440)	+= max34440.o
>  obj-$(CONFIG_SENSORS_MAX8688)	+= max8688.o
>  obj-$(CONFIG_SENSORS_MP2975)	+= mp2975.o
> +obj-$(CONFIG_SENSORS_PM6764TR)	+= pm6764tr.o
>  obj-$(CONFIG_SENSORS_PXE1610)	+= pxe1610.o
>  obj-$(CONFIG_SENSORS_TPS40422)	+= tps40422.o
>  obj-$(CONFIG_SENSORS_TPS53679)	+= tps53679.o
> diff --git a/drivers/hwmon/pmbus/pm6764tr.c b/drivers/hwmon/pmbus/pm6764tr.c
> new file mode 100644
> index 000000000000..2ab68036bb0c
> --- /dev/null
> +++ b/drivers/hwmon/pmbus/pm6764tr.c
> @@ -0,0 +1,78 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Hardware monitoring driver for STMicroelectronics digital controller PM6764TR
> + */
> +
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/pmbus.h>
> +#include <linux/slab.h>
> +#include "pmbus.h"
> +
> +#define PM6764TR_PMBUS_READ_VOUT	0xD4
> +
> +static int pm6764tr_read_word_data(struct i2c_client *client, int page, int reg)
> +{
> +	int ret;
> +
> +	switch (reg) {
> +	case PMBUS_VIRT_READ_VMON:
> +		ret = pmbus_read_word_data(client, page, PM6764TR_PMBUS_READ_VOUT);
> +		break;
> +	default:
> +		ret = -ENODATA;
> +		break;
> +	}
> +	return ret;
> +}
> +
> +static struct pmbus_driver_info pm6764tr_info = {
> +	.pages = 1,
> +	.format[PSC_VOLTAGE_IN] = linear,
> +	.format[PSC_VOLTAGE_OUT] = vid,
> +	.format[PSC_TEMPERATURE] = linear,
> +	.format[PSC_CURRENT_OUT] = linear,
> +	.format[PSC_POWER] = linear,
> +	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN |  PMBUS_HAVE_PIN |
> +	    PMBUS_HAVE_IOUT | PMBUS_HAVE_POUT | PMBUS_HAVE_VMON |
> +		PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_VOUT |
> +		PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
> +	.read_word_data = pm6764tr_read_word_data,
> +};
> +
> +static int pm6764tr_probe(struct i2c_client *client,
> +			  const struct i2c_device_id *id)
> +{
> +	return pmbus_do_probe(client, id, &pm6764tr_info);
> +}
> +
> +static const struct i2c_device_id pm6764tr_id[] = {
> +	{"pm6764tr", 0},
> +	{}
> +};
> +MODULE_DEVICE_TABLE(i2c, pm6764tr_id);
> +
> +static const struct of_device_id pm6764tr_of_match[] = {
> +	{.compatible = "pm6764tr"},
> +	{}
> +};
> +
> +/* This is the driver that will be inserted */
> +static struct i2c_driver pm6764tr_driver = {
> +	.driver = {
> +		   .name = "pm6764tr",
> +		   .of_match_table = of_match_ptr(pm6764tr_of_match),
> +		   },
> +	.probe_new = pm6764tr_probe,
> +	.id_table = pm6764tr_id,
> +};
> +
> +module_i2c_driver(pm6764tr_driver);
> +
> +MODULE_AUTHOR("Charles Hsu");
> +MODULE_DESCRIPTION("PMBus driver for  ST PM6764TR");
> +MODULE_LICENSE("GPL");
> -- 
> 2.25.1
>