[RESEND PATCH 13/19] phy: sun4i-usb: add support for A100 USB PHY

[Frank Lee]

From: Yangtao Li <frank@xxxxxxxxxxxxxxxxx>

Add support for a100's usb phy, which with 2 PHYs.

Signed-off-by: Yangtao Li <frank@xxxxxxxxxxxxxxxxx>
---
 drivers/phy/allwinner/phy-sun4i-usb.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
index a6900495baa5..1a0e403131e7 100644
--- a/drivers/phy/allwinner/phy-sun4i-usb.c
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c
@@ -107,6 +107,7 @@ enum sun4i_usb_phy_type {
 	sun8i_r40_phy,
 	sun8i_v3s_phy,
 	sun50i_a64_phy,
+	sun50i_a100_phy,
 	sun50i_h6_phy,
 };
 
@@ -289,7 +290,13 @@ static int sun4i_usb_phy_init(struct phy *_phy)
 	}
 
 	if (data->cfg->type == sun8i_a83t_phy ||
+	    data->cfg->type == sun50i_a100_phy ||
 	    data->cfg->type == sun50i_h6_phy) {
+		if (phy->pmu && data->cfg->enable_pmu_unk1) {
+			val = readl(phy->pmu + REG_PMU_UNK1);
+			writel(val & ~BIT(3), phy->pmu + REG_PMU_UNK1);
+		}
+
 		if (phy->index == 0) {
 			val = readl(data->base + data->cfg->phyctl_offset);
 			val |= PHY_CTL_VBUSVLDEXT;
@@ -339,6 +346,7 @@ static int sun4i_usb_phy_exit(struct phy *_phy)
 
 	if (phy->index == 0) {
 		if (data->cfg->type == sun8i_a83t_phy ||
+		    data->cfg->type == sun50i_a100_phy ||
 		    data->cfg->type == sun50i_h6_phy) {
 			void __iomem *phyctl = data->base +
 				data->cfg->phyctl_offset;
@@ -960,6 +968,16 @@ static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = {
 	.phy0_dual_route = true,
 };
 
+static const struct sun4i_usb_phy_cfg sun50i_a100_cfg = {
+	.num_phys = 2,
+	.type = sun50i_a100_phy,
+	.disc_thresh = 3,
+	.phyctl_offset = REG_PHYCTL_A33,
+	.dedicated_clocks = true,
+	.enable_pmu_unk1 = true,
+	.phy0_dual_route = true,
+};
+
 static const struct sun4i_usb_phy_cfg sun50i_h6_cfg = {
 	.num_phys = 4,
 	.type = sun50i_h6_phy,
@@ -983,6 +1001,7 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = {
 	{ .compatible = "allwinner,sun8i-v3s-usb-phy", .data = &sun8i_v3s_cfg },
 	{ .compatible = "allwinner,sun50i-a64-usb-phy",
 	  .data = &sun50i_a64_cfg},
+	{ .compatible = "allwinner,sun50i-a100-usb-phy", .data = &sun50i_a100_cfg },
 	{ .compatible = "allwinner,sun50i-h6-usb-phy", .data = &sun50i_h6_cfg },
 	{ },
 };
-- 
2.28.0