[PATCH] phy: phylink: Fix CuSFP issue in phylink

[Bjarni Jonasson]

There is an issue with the current phylink driver and CuSFPs which
results in a callback to the phylink validate function without any
advertisement capabilities.  The workaround (in this changeset)
is to assign capabilities if a 1000baseT SFP is identified.

Signed-off-by: Bjarni Jonasson <bjarni.jonasson@xxxxxxxxxxxxx>
---
 drivers/net/phy/phylink.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 32f4e8ec96cf..76e25f7f6934 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -2196,6 +2196,14 @@ static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy)
 		mode = MLO_AN_INBAND;
 
 	/* Do the initial configuration */
+	if (phylink_test(pl->sfp_support, 1000baseT_Full)) {
+		pr_info("%s:%d: adding 1000baseT to PHY\n", __func__, __LINE__);
+		phylink_set(phy->supported, 1000baseT_Half);
+		phylink_set(phy->supported, 1000baseT_Full);
+		phylink_set(phy->advertising, 1000baseT_Half);
+		phylink_set(phy->advertising, 1000baseT_Full);
+	}
+
 	ret = phylink_sfp_config(pl, mode, phy->supported, phy->advertising);
 	if (ret < 0)
 		return ret;
-- 
2.17.1