Re: [PATCH v3 3/4] pinctrl: amd: print debounce filter info in debugfs

[Linus Walleij]

On Fri, Nov 6, 2020 at 12:19 AM Coiby Xu <coiby.xu@xxxxxxxxx> wrote:

> Print the status of debounce filter as follows,
> $ cat /sys/kernel/debug/gpio
> pin129          interrupt is disabled| interrupt is masked| disable wakeup in S0i3 state| disable wakeup in S3 state|
>  disable wakeup in S4/S5 state| input is high|   pull-up is disabled| Pull-down is disabled|   output is disabled| debouncing filter disabled|   0x50000
>                                                                                                                    ^^^^^^^^^^^^^^^^^^^^^^^^^^
> pin130          interrupt is disabled| interrupt is masked| disable wakeup in S0i3 state| disable wakeup in S3 state|
>  disable wakeup in S4/S5 state| input is high|   pull-up is disabled| Pull-down is disabled|   output is disabled| debouncing filter (high) enabled| debouncing timeout is 124800 (us)| 0x503c8
>                                                                                                                   ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>
> Signed-off-by: Coiby Xu <coiby.xu@xxxxxxxxx>

Patch applied for the next kernel (v5.11).

Yours,
Linus Walleij