Re: [PATCH] ARC: mm: fix spelling mistakes

[Vineet Gupta]

On 11/9/20 5:21 AM, Flavio Suligoi wrote:
> Signed-off-by: Flavio Suligoi <f.suligoi@xxxxxxx>

Thx, applied to for-curr !

-Vineet

> ---
>   arch/arc/mm/tlb.c | 24 ++++++++++++------------
>   1 file changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c
> index c340acd989a0..9bb3c24f3677 100644
> --- a/arch/arc/mm/tlb.c
> +++ b/arch/arc/mm/tlb.c
> @@ -30,14 +30,14 @@
>    *  -Changes related to MMU v2 (Rel 4.8)
>    *
>    * Vineetg: Aug 29th 2008
> - *  -In TLB Flush operations (Metal Fix MMU) there is a explict command to
> + *  -In TLB Flush operations (Metal Fix MMU) there is a explicit command to
>    *    flush Micro-TLBS. If TLB Index Reg is invalid prior to TLBIVUTLB cmd,
>    *    it fails. Thus need to load it with ANY valid value before invoking
>    *    TLBIVUTLB cmd
>    *
>    * Vineetg: Aug 21th 2008:
>    *  -Reduced the duration of IRQ lockouts in TLB Flush routines
> - *  -Multiple copies of TLB erase code seperated into a "single" function
> + *  -Multiple copies of TLB erase code separated into a "single" function
>    *  -In TLB Flush routines, interrupt disabling moved UP to retrieve ASID
>    *       in interrupt-safe region.
>    *
> @@ -66,7 +66,7 @@
>    *
>    * Although J-TLB is 2 way set assoc, ARC700 caches J-TLB into uTLBS which has
>    * much higher associativity. u-D-TLB is 8 ways, u-I-TLB is 4 ways.
> - * Given this, the thrasing problem should never happen because once the 3
> + * Given this, the thrashing problem should never happen because once the 3
>    * J-TLB entries are created (even though 3rd will knock out one of the prev
>    * two), the u-D-TLB and u-I-TLB will have what is required to accomplish memcpy
>    *
> @@ -127,7 +127,7 @@ static void utlb_invalidate(void)
>   	 * There was however an obscure hardware bug, where uTLB flush would
>   	 * fail when a prior probe for J-TLB (both totally unrelated) would
>   	 * return lkup err - because the entry didn't exist in MMU.
> -	 * The Workround was to set Index reg with some valid value, prior to
> +	 * The Workaround was to set Index reg with some valid value, prior to
>   	 * flush. This was fixed in MMU v3
>   	 */
>   	unsigned int idx;
> @@ -272,7 +272,7 @@ noinline void local_flush_tlb_all(void)
>   }
>   
>   /*
> - * Flush the entrie MM for userland. The fastest way is to move to Next ASID
> + * Flush the entire MM for userland. The fastest way is to move to Next ASID
>    */
>   noinline void local_flush_tlb_mm(struct mm_struct *mm)
>   {
> @@ -303,7 +303,7 @@ noinline void local_flush_tlb_mm(struct mm_struct *mm)
>    * Difference between this and Kernel Range Flush is
>    *  -Here the fastest way (if range is too large) is to move to next ASID
>    *      without doing any explicit Shootdown
> - *  -In case of kernel Flush, entry has to be shot down explictly
> + *  -In case of kernel Flush, entry has to be shot down explicitly
>    */
>   void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
>   			   unsigned long end)
> @@ -620,7 +620,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned,
>    * Super Page size is configurable in hardware (4K to 16M), but fixed once
>    * RTL builds.
>    *
> - * The exact THP size a Linx configuration will support is a function of:
> + * The exact THP size a Linux configuration will support is a function of:
>    *  - MMU page size (typical 8K, RTL fixed)
>    *  - software page walker address split between PGD:PTE:PFN (typical
>    *    11:8:13, but can be changed with 1 line)
> @@ -698,7 +698,7 @@ void local_flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start,
>   
>   #endif
>   
> -/* Read the Cache Build Confuration Registers, Decode them and save into
> +/* Read the Cache Build Configuration Registers, Decode them and save into
>    * the cpuinfo structure for later use.
>    * No Validation is done here, simply read/convert the BCRs
>    */
> @@ -803,13 +803,13 @@ void arc_mmu_init(void)
>   	pr_info("%s", arc_mmu_mumbojumbo(0, str, sizeof(str)));
>   
>   	/*
> -	 * Can't be done in processor.h due to header include depenedencies
> +	 * Can't be done in processor.h due to header include dependencies
>   	 */
>   	BUILD_BUG_ON(!IS_ALIGNED((CONFIG_ARC_KVADDR_SIZE << 20), PMD_SIZE));
>   
>   	/*
>   	 * stack top size sanity check,
> -	 * Can't be done in processor.h due to header include depenedencies
> +	 * Can't be done in processor.h due to header include dependencies
>   	 */
>   	BUILD_BUG_ON(!IS_ALIGNED(STACK_TOP, PMD_SIZE));
>   
> @@ -881,7 +881,7 @@ void arc_mmu_init(void)
>    *      the duplicate one.
>    * -Knob to be verbose abt it.(TODO: hook them up to debugfs)
>    */
> -volatile int dup_pd_silent; /* Be slient abt it or complain (default) */
> +volatile int dup_pd_silent; /* Be silent abt it or complain (default) */
>   
>   void do_tlb_overlap_fault(unsigned long cause, unsigned long address,
>   			  struct pt_regs *regs)
> @@ -948,7 +948,7 @@ void do_tlb_overlap_fault(unsigned long cause, unsigned long address,
>   
>   /***********************************************************************
>    * Diagnostic Routines
> - *  -Called from Low Level TLB Hanlders if things don;t look good
> + *  -Called from Low Level TLB Handlers if things don;t look good
>    **********************************************************************/
>   
>   #ifdef CONFIG_ARC_DBG_TLB_PARANOIA