[PATCH v6 1/4] HID: i2c-hid: Reorganize so ACPI and OF are separate modules
From: Douglas Anderson
Date: Wed Nov 11 2020 - 20:39:36 EST
This patch rejiggers the i2c-hid code so that the OF (Open Firmware
aka Device Tree) and ACPI support is separated out a bit. The OF and
ACPI drivers are now separate modules that wrap the core module.
Essentially, what we're doing here:
* Make "power up" and "power down" a function that can be (optionally)
implemented by a given user of the i2c-hid core.
* The OF and ACPI modules are drivers on their own, so they implement
probe / remove / suspend / resume / shutdown. The core code
provides implementations that OF and ACPI can call into.
We'll organize this so that we now have 3 modules: the old i2c-hid
module becomes the "core" module and two new modules will depend on
it, handling probing the specific device.
As part of this work, we'll remove the i2c-hid "platform data"
concept since it's not needed.
Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
Changes in v6:
- ACPI probe function should have been "static"
- Don't export suspend/resume, just export dev_pm_ops from core.
- Fixed crash in ACPI module (missing init of "client")
- No need for regulator include in the core.
- Removed i2c_device_id table from ACPI module.
Changes in v5:
- Add shutdown_tail op and use it in ACPI.
- i2chid_subclass_data => i2chid_ops.
- power_up_device => power_up (same with power_down).
- subclass => ops.
Changes in v4:
- Fully rejigger so ACPI and OF are full subclasses.
Changes in v3:
- Rework to use subclassing.
Changes in v2:
- Get timings based on the compatible string.
- Use a separate compatible string for this new touchscreen.
drivers/hid/Makefile | 2 +-
drivers/hid/i2c-hid/Kconfig | 32 +++-
drivers/hid/i2c-hid/Makefile | 5 +-
drivers/hid/i2c-hid/i2c-hid-acpi.c | 159 ++++++++++++++++
drivers/hid/i2c-hid/i2c-hid-core.c | 254 +++++---------------------
drivers/hid/i2c-hid/i2c-hid-of.c | 143 +++++++++++++++
drivers/hid/i2c-hid/i2c-hid.h | 22 +++
include/linux/platform_data/i2c-hid.h | 41 -----
8 files changed, 397 insertions(+), 261 deletions(-)
create mode 100644 drivers/hid/i2c-hid/i2c-hid-acpi.c
create mode 100644 drivers/hid/i2c-hid/i2c-hid-of.c
delete mode 100644 include/linux/platform_data/i2c-hid.h
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index 4acb583c92a6..8d0c15a0d652 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -138,7 +138,7 @@ obj-$(CONFIG_USB_HID) += usbhid/
obj-$(CONFIG_USB_MOUSE) += usbhid/
obj-$(CONFIG_USB_KBD) += usbhid/
-obj-$(CONFIG_I2C_HID) += i2c-hid/
+obj-$(CONFIG_I2C_HID_CORE) += i2c-hid/
obj-$(CONFIG_INTEL_ISH_HID) += intel-ish-hid/
obj-$(INTEL_ISH_FIRMWARE_DOWNLOADER) += intel-ish-hid/
diff --git a/drivers/hid/i2c-hid/Kconfig b/drivers/hid/i2c-hid/Kconfig
index c4e5dfeab2bd..819b7521c182 100644
--- a/drivers/hid/i2c-hid/Kconfig
+++ b/drivers/hid/i2c-hid/Kconfig
@@ -2,18 +2,40 @@
menu "I2C HID support"
depends on I2C
-config I2C_HID
- tristate "HID over I2C transport layer"
+config I2C_HID_ACPI
+ tristate "HID over I2C transport layer ACPI driver"
default n
- depends on I2C && INPUT
- select HID
+ depends on I2C && INPUT && ACPI
+ help
+ Say Y here if you use a keyboard, a touchpad, a touchscreen, or any
+ other HID based devices which is connected to your computer via I2C.
+ This driver supports ACPI-based systems.
+
+ If unsure, say N.
+
+ This support is also available as a module. If so, the module
+ will be called i2c-hid-acpi. It will also build/depend on the
+ module i2c-hid.
+
+config I2C_HID_OF
+ tristate "HID over I2C transport layer Open Firmware driver"
+ default n
+ depends on I2C && INPUT && OF
help
Say Y here if you use a keyboard, a touchpad, a touchscreen, or any
other HID based devices which is connected to your computer via I2C.
+ This driver supports Open Firmware (Device Tree)-based systems.
If unsure, say N.
This support is also available as a module. If so, the module
- will be called i2c-hid.
+ will be called i2c-hid-of. It will also build/depend on the
+ module i2c-hid.
endmenu
+
+config I2C_HID_CORE
+ tristate
+ default y if I2C_HID_ACPI=y || I2C_HID_OF=y
+ default m if I2C_HID_ACPI=m || I2C_HID_OF=m
+ select HID
diff --git a/drivers/hid/i2c-hid/Makefile b/drivers/hid/i2c-hid/Makefile
index 681b3896898e..9b4a73446841 100644
--- a/drivers/hid/i2c-hid/Makefile
+++ b/drivers/hid/i2c-hid/Makefile
@@ -3,7 +3,10 @@
# Makefile for the I2C input drivers
#
-obj-$(CONFIG_I2C_HID) += i2c-hid.o
+obj-$(CONFIG_I2C_HID_CORE) += i2c-hid.o
i2c-hid-objs = i2c-hid-core.o
i2c-hid-$(CONFIG_DMI) += i2c-hid-dmi-quirks.o
+
+obj-$(CONFIG_I2C_HID_ACPI) += i2c-hid-acpi.o
+obj-$(CONFIG_I2C_HID_OF) += i2c-hid-of.o
diff --git a/drivers/hid/i2c-hid/i2c-hid-acpi.c b/drivers/hid/i2c-hid/i2c-hid-acpi.c
new file mode 100644
index 000000000000..0f86060f01b4
--- /dev/null
+++ b/drivers/hid/i2c-hid/i2c-hid-acpi.c
@@ -0,0 +1,159 @@
+/*
+ * HID over I2C ACPI Subclass
+ *
+ * Copyright (c) 2012 Benjamin Tissoires <benjamin.tissoires@xxxxxxxxx>
+ * Copyright (c) 2012 Ecole Nationale de l'Aviation Civile, France
+ * Copyright (c) 2012 Red Hat, Inc
+ *
+ * This code was forked out of the core code, which was partly based on
+ * "USB HID support for Linux":
+ *
+ * Copyright (c) 1999 Andreas Gal
+ * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@xxxxxxx>
+ * Copyright (c) 2005 Michael Haboustak <mike-@xxxxxxxxxxxx> for Concept2, Inc
+ * Copyright (c) 2007-2008 Oliver Neukum
+ * Copyright (c) 2006-2010 Jiri Kosina
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+
+#include "i2c-hid.h"
+
+struct i2c_hid_acpi {
+ struct i2chid_ops ops;
+ struct i2c_client *client;
+ bool power_fixed;
+};
+
+static const struct acpi_device_id i2c_hid_acpi_blacklist[] = {
+ /*
+ * The CHPN0001 ACPI device, which is used to describe the Chipone
+ * ICN8505 controller, has a _CID of PNP0C50 but is not HID compatible.
+ */
+ {"CHPN0001", 0 },
+ { },
+};
+
+static int i2c_hid_acpi_get_descriptor(struct i2c_client *client)
+{
+ static guid_t i2c_hid_guid =
+ GUID_INIT(0x3CDFF6F7, 0x4267, 0x4555,
+ 0xAD, 0x05, 0xB3, 0x0A, 0x3D, 0x89, 0x38, 0xDE);
+ union acpi_object *obj;
+ struct acpi_device *adev;
+ acpi_handle handle;
+ u16 hid_descriptor_address;
+
+ handle = ACPI_HANDLE(&client->dev);
+ if (!handle || acpi_bus_get_device(handle, &adev)) {
+ dev_err(&client->dev, "Error could not get ACPI device\n");
+ return -ENODEV;
+ }
+
+ if (acpi_match_device_ids(adev, i2c_hid_acpi_blacklist) == 0)
+ return -ENODEV;
+
+ obj = acpi_evaluate_dsm_typed(handle, &i2c_hid_guid, 1, 1, NULL,
+ ACPI_TYPE_INTEGER);
+ if (!obj) {
+ dev_err(&client->dev, "Error _DSM call to get HID descriptor address failed\n");
+ return -ENODEV;
+ }
+
+ hid_descriptor_address = obj->integer.value;
+ ACPI_FREE(obj);
+
+ return hid_descriptor_address;
+}
+
+static int i2c_hid_acpi_power_up(struct i2chid_ops *ops)
+{
+ struct i2c_hid_acpi *ihid_of =
+ container_of(ops, struct i2c_hid_acpi, ops);
+ struct device *dev = &ihid_of->client->dev;
+ struct acpi_device *adev;
+
+ /* Only need to call acpi_device_fix_up_power() the first time */
+ if (ihid_of->power_fixed)
+ return 0;
+ ihid_of->power_fixed = true;
+
+ adev = ACPI_COMPANION(dev);
+ if (adev)
+ acpi_device_fix_up_power(adev);
+
+ return 0;
+}
+
+static void i2c_hid_acpi_shutdown_tail(struct i2chid_ops *ops)
+{
+ struct i2c_hid_acpi *ihid_of =
+ container_of(ops, struct i2c_hid_acpi, ops);
+ struct device *dev = &ihid_of->client->dev;
+ acpi_device_set_power(ACPI_COMPANION(dev), ACPI_STATE_D3_COLD);
+}
+
+static int i2c_hid_acpi_probe(struct i2c_client *client,
+ const struct i2c_device_id *dev_id)
+{
+ struct device *dev = &client->dev;
+ struct i2c_hid_acpi *ihid_acpi;
+ u16 hid_descriptor_address;
+ int ret;
+
+ ihid_acpi = devm_kzalloc(&client->dev, sizeof(*ihid_acpi), GFP_KERNEL);
+ if (!ihid_acpi)
+ return -ENOMEM;
+
+ ihid_acpi->client = client;
+ ihid_acpi->ops.power_up = i2c_hid_acpi_power_up;
+ ihid_acpi->ops.shutdown_tail = i2c_hid_acpi_shutdown_tail;
+
+ ret = i2c_hid_acpi_get_descriptor(client);
+ if (ret < 0)
+ return ret;
+ hid_descriptor_address = ret;
+
+ if (acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0) {
+ device_set_wakeup_capable(dev, true);
+ device_set_wakeup_enable(dev, false);
+ }
+
+ return i2c_hid_core_probe(client, &ihid_acpi->ops,
+ hid_descriptor_address);
+}
+
+static const struct acpi_device_id i2c_hid_acpi_match[] = {
+ {"ACPI0C50", 0 },
+ {"PNP0C50", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, i2c_hid_acpi_match);
+
+static struct i2c_driver i2c_hid_acpi_driver = {
+ .driver = {
+ .name = "i2c_hid_acpi",
+ .pm = &i2c_hid_core_pm,
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
+ .acpi_match_table = ACPI_PTR(i2c_hid_acpi_match),
+ },
+
+ .probe = i2c_hid_acpi_probe,
+ .remove = i2c_hid_core_remove,
+ .shutdown = i2c_hid_core_shutdown,
+};
+
+module_i2c_driver(i2c_hid_acpi_driver);
+
+MODULE_DESCRIPTION("HID over I2C ACPI driver");
+MODULE_AUTHOR("Benjamin Tissoires <benjamin.tissoires@xxxxxxxxx>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c
index aeff1ffb0c8b..3962cb36e365 100644
--- a/drivers/hid/i2c-hid/i2c-hid-core.c
+++ b/drivers/hid/i2c-hid/i2c-hid-core.c
@@ -35,11 +35,6 @@
#include <linux/kernel.h>
#include <linux/hid.h>
#include <linux/mutex.h>
-#include <linux/acpi.h>
-#include <linux/of.h>
-#include <linux/regulator/consumer.h>
-
-#include <linux/platform_data/i2c-hid.h>
#include "../hid-ids.h"
#include "i2c-hid.h"
@@ -156,10 +151,10 @@ struct i2c_hid {
wait_queue_head_t wait; /* For waiting the interrupt */
- struct i2c_hid_platform_data pdata;
-
bool irq_wake_enabled;
struct mutex reset_lock;
+
+ struct i2chid_ops *ops;
};
static const struct i2c_hid_quirks {
@@ -884,144 +879,36 @@ static int i2c_hid_fetch_hid_descriptor(struct i2c_hid *ihid)
return 0;
}
-#ifdef CONFIG_ACPI
-static const struct acpi_device_id i2c_hid_acpi_blacklist[] = {
- /*
- * The CHPN0001 ACPI device, which is used to describe the Chipone
- * ICN8505 controller, has a _CID of PNP0C50 but is not HID compatible.
- */
- {"CHPN0001", 0 },
- { },
-};
-
-static int i2c_hid_acpi_pdata(struct i2c_client *client,
- struct i2c_hid_platform_data *pdata)
-{
- static guid_t i2c_hid_guid =
- GUID_INIT(0x3CDFF6F7, 0x4267, 0x4555,
- 0xAD, 0x05, 0xB3, 0x0A, 0x3D, 0x89, 0x38, 0xDE);
- union acpi_object *obj;
- struct acpi_device *adev;
- acpi_handle handle;
-
- handle = ACPI_HANDLE(&client->dev);
- if (!handle || acpi_bus_get_device(handle, &adev)) {
- dev_err(&client->dev, "Error could not get ACPI device\n");
- return -ENODEV;
- }
-
- if (acpi_match_device_ids(adev, i2c_hid_acpi_blacklist) == 0)
- return -ENODEV;
-
- obj = acpi_evaluate_dsm_typed(handle, &i2c_hid_guid, 1, 1, NULL,
- ACPI_TYPE_INTEGER);
- if (!obj) {
- dev_err(&client->dev, "Error _DSM call to get HID descriptor address failed\n");
- return -ENODEV;
- }
-
- pdata->hid_descriptor_address = obj->integer.value;
- ACPI_FREE(obj);
-
- return 0;
-}
-
-static void i2c_hid_acpi_fix_up_power(struct device *dev)
-{
- struct acpi_device *adev;
-
- adev = ACPI_COMPANION(dev);
- if (adev)
- acpi_device_fix_up_power(adev);
-}
-
-static void i2c_hid_acpi_enable_wakeup(struct device *dev)
-{
- if (acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0) {
- device_set_wakeup_capable(dev, true);
- device_set_wakeup_enable(dev, false);
- }
-}
-
-static void i2c_hid_acpi_shutdown(struct device *dev)
+static int i2c_hid_core_power_up(struct i2c_hid *ihid)
{
- acpi_device_set_power(ACPI_COMPANION(dev), ACPI_STATE_D3_COLD);
-}
+ if (!ihid->ops->power_up)
+ return 0;
-static const struct acpi_device_id i2c_hid_acpi_match[] = {
- {"ACPI0C50", 0 },
- {"PNP0C50", 0 },
- { },
-};
-MODULE_DEVICE_TABLE(acpi, i2c_hid_acpi_match);
-#else
-static inline int i2c_hid_acpi_pdata(struct i2c_client *client,
- struct i2c_hid_platform_data *pdata)
-{
- return -ENODEV;
+ return ihid->ops->power_up(ihid->ops);
}
-static inline void i2c_hid_acpi_fix_up_power(struct device *dev) {}
-
-static inline void i2c_hid_acpi_enable_wakeup(struct device *dev) {}
-
-static inline void i2c_hid_acpi_shutdown(struct device *dev) {}
-#endif
-
-#ifdef CONFIG_OF
-static int i2c_hid_of_probe(struct i2c_client *client,
- struct i2c_hid_platform_data *pdata)
+static void i2c_hid_core_power_down(struct i2c_hid *ihid)
{
- struct device *dev = &client->dev;
- u32 val;
- int ret;
-
- ret = of_property_read_u32(dev->of_node, "hid-descr-addr", &val);
- if (ret) {
- dev_err(&client->dev, "HID register address not provided\n");
- return -ENODEV;
- }
- if (val >> 16) {
- dev_err(&client->dev, "Bad HID register address: 0x%08x\n",
- val);
- return -EINVAL;
- }
- pdata->hid_descriptor_address = val;
-
- return 0;
-}
+ if (!ihid->ops->power_down)
+ return;
-static const struct of_device_id i2c_hid_of_match[] = {
- { .compatible = "hid-over-i2c" },
- {},
-};
-MODULE_DEVICE_TABLE(of, i2c_hid_of_match);
-#else
-static inline int i2c_hid_of_probe(struct i2c_client *client,
- struct i2c_hid_platform_data *pdata)
-{
- return -ENODEV;
+ ihid->ops->power_down(ihid->ops);
}
-#endif
-static void i2c_hid_fwnode_probe(struct i2c_client *client,
- struct i2c_hid_platform_data *pdata)
+static void i2c_hid_core_shutdown_tail(struct i2c_hid *ihid)
{
- u32 val;
+ if (!ihid->ops->shutdown_tail)
+ return;
- if (!device_property_read_u32(&client->dev, "post-power-on-delay-ms",
- &val))
- pdata->post_power_delay_ms = val;
+ ihid->ops->shutdown_tail(ihid->ops);
}
-static int i2c_hid_probe(struct i2c_client *client,
- const struct i2c_device_id *dev_id)
+int i2c_hid_core_probe(struct i2c_client *client, struct i2chid_ops *ops,
+ u16 hid_descriptor_address)
{
int ret;
struct i2c_hid *ihid;
struct hid_device *hid;
- __u16 hidRegister;
- struct i2c_hid_platform_data *platform_data = client->dev.platform_data;
dbg_hid("HID probe called for i2c 0x%02x\n", client->addr);
@@ -1042,44 +929,17 @@ static int i2c_hid_probe(struct i2c_client *client,
if (!ihid)
return -ENOMEM;
- if (client->dev.of_node) {
- ret = i2c_hid_of_probe(client, &ihid->pdata);
- if (ret)
- return ret;
- } else if (!platform_data) {
- ret = i2c_hid_acpi_pdata(client, &ihid->pdata);
- if (ret)
- return ret;
- } else {
- ihid->pdata = *platform_data;
- }
-
- /* Parse platform agnostic common properties from ACPI / device tree */
- i2c_hid_fwnode_probe(client, &ihid->pdata);
-
- ihid->pdata.supplies[0].supply = "vdd";
- ihid->pdata.supplies[1].supply = "vddl";
+ ihid->ops = ops;
- ret = devm_regulator_bulk_get(&client->dev,
- ARRAY_SIZE(ihid->pdata.supplies),
- ihid->pdata.supplies);
+ ret = i2c_hid_core_power_up(ihid);
if (ret)
return ret;
- ret = regulator_bulk_enable(ARRAY_SIZE(ihid->pdata.supplies),
- ihid->pdata.supplies);
- if (ret < 0)
- return ret;
-
- if (ihid->pdata.post_power_delay_ms)
- msleep(ihid->pdata.post_power_delay_ms);
-
i2c_set_clientdata(client, ihid);
ihid->client = client;
- hidRegister = ihid->pdata.hid_descriptor_address;
- ihid->wHIDDescRegister = cpu_to_le16(hidRegister);
+ ihid->wHIDDescRegister = cpu_to_le16(hid_descriptor_address);
init_waitqueue_head(&ihid->wait);
mutex_init(&ihid->reset_lock);
@@ -1089,11 +949,7 @@ static int i2c_hid_probe(struct i2c_client *client,
* real computation later. */
ret = i2c_hid_alloc_buffers(ihid, HID_MIN_BUFFER_SIZE);
if (ret < 0)
- goto err_regulator;
-
- i2c_hid_acpi_fix_up_power(&client->dev);
-
- i2c_hid_acpi_enable_wakeup(&client->dev);
+ goto err_powered;
device_enable_async_suspend(&client->dev);
@@ -1102,16 +958,16 @@ static int i2c_hid_probe(struct i2c_client *client,
if (ret < 0) {
dev_dbg(&client->dev, "nothing at this address: %d\n", ret);
ret = -ENXIO;
- goto err_regulator;
+ goto err_powered;
}
ret = i2c_hid_fetch_hid_descriptor(ihid);
if (ret < 0)
- goto err_regulator;
+ goto err_powered;
ret = i2c_hid_init_irq(client);
if (ret < 0)
- goto err_regulator;
+ goto err_powered;
hid = hid_allocate_device();
if (IS_ERR(hid)) {
@@ -1150,14 +1006,14 @@ static int i2c_hid_probe(struct i2c_client *client,
err_irq:
free_irq(client->irq, ihid);
-err_regulator:
- regulator_bulk_disable(ARRAY_SIZE(ihid->pdata.supplies),
- ihid->pdata.supplies);
+err_powered:
+ i2c_hid_core_power_down(ihid);
i2c_hid_free_buffers(ihid);
return ret;
}
+EXPORT_SYMBOL_GPL(i2c_hid_core_probe);
-static int i2c_hid_remove(struct i2c_client *client)
+int i2c_hid_core_remove(struct i2c_client *client)
{
struct i2c_hid *ihid = i2c_get_clientdata(client);
struct hid_device *hid;
@@ -1170,24 +1026,25 @@ static int i2c_hid_remove(struct i2c_client *client)
if (ihid->bufsize)
i2c_hid_free_buffers(ihid);
- regulator_bulk_disable(ARRAY_SIZE(ihid->pdata.supplies),
- ihid->pdata.supplies);
+ i2c_hid_core_power_down(ihid);
return 0;
}
+EXPORT_SYMBOL_GPL(i2c_hid_core_remove);
-static void i2c_hid_shutdown(struct i2c_client *client)
+void i2c_hid_core_shutdown(struct i2c_client *client)
{
struct i2c_hid *ihid = i2c_get_clientdata(client);
i2c_hid_set_power(client, I2C_HID_PWR_SLEEP);
free_irq(client->irq, ihid);
- i2c_hid_acpi_shutdown(&client->dev);
+ i2c_hid_core_shutdown_tail(ihid);
}
+EXPORT_SYMBOL_GPL(i2c_hid_core_shutdown);
#ifdef CONFIG_PM_SLEEP
-static int i2c_hid_suspend(struct device *dev)
+int i2c_hid_core_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct i2c_hid *ihid = i2c_get_clientdata(client);
@@ -1214,14 +1071,14 @@ static int i2c_hid_suspend(struct device *dev)
hid_warn(hid, "Failed to enable irq wake: %d\n",
wake_status);
} else {
- regulator_bulk_disable(ARRAY_SIZE(ihid->pdata.supplies),
- ihid->pdata.supplies);
+ i2c_hid_core_power_down(ihid);
}
return 0;
}
+EXPORT_SYMBOL_GPL(i2c_hid_core_suspend);
-static int i2c_hid_resume(struct device *dev)
+int i2c_hid_core_resume(struct device *dev)
{
int ret;
struct i2c_client *client = to_i2c_client(dev);
@@ -1230,13 +1087,7 @@ static int i2c_hid_resume(struct device *dev)
int wake_status;
if (!device_may_wakeup(&client->dev)) {
- ret = regulator_bulk_enable(ARRAY_SIZE(ihid->pdata.supplies),
- ihid->pdata.supplies);
- if (ret)
- hid_warn(hid, "Failed to enable supplies: %d\n", ret);
-
- if (ihid->pdata.post_power_delay_ms)
- msleep(ihid->pdata.post_power_delay_ms);
+ i2c_hid_core_power_up(ihid);
} else if (ihid->irq_wake_enabled) {
wake_status = disable_irq_wake(client->irq);
if (!wake_status)
@@ -1271,36 +1122,13 @@ static int i2c_hid_resume(struct device *dev)
return 0;
}
+EXPORT_SYMBOL_GPL(i2c_hid_core_resume);
#endif
-static const struct dev_pm_ops i2c_hid_pm = {
- SET_SYSTEM_SLEEP_PM_OPS(i2c_hid_suspend, i2c_hid_resume)
+const struct dev_pm_ops i2c_hid_core_pm = {
+ SET_SYSTEM_SLEEP_PM_OPS(i2c_hid_core_suspend, i2c_hid_core_resume)
};
-
-static const struct i2c_device_id i2c_hid_id_table[] = {
- { "hid", 0 },
- { "hid-over-i2c", 0 },
- { },
-};
-MODULE_DEVICE_TABLE(i2c, i2c_hid_id_table);
-
-
-static struct i2c_driver i2c_hid_driver = {
- .driver = {
- .name = "i2c_hid",
- .pm = &i2c_hid_pm,
- .probe_type = PROBE_PREFER_ASYNCHRONOUS,
- .acpi_match_table = ACPI_PTR(i2c_hid_acpi_match),
- .of_match_table = of_match_ptr(i2c_hid_of_match),
- },
-
- .probe = i2c_hid_probe,
- .remove = i2c_hid_remove,
- .shutdown = i2c_hid_shutdown,
- .id_table = i2c_hid_id_table,
-};
-
-module_i2c_driver(i2c_hid_driver);
+EXPORT_SYMBOL_GPL(i2c_hid_core_pm);
MODULE_DESCRIPTION("HID over I2C core driver");
MODULE_AUTHOR("Benjamin Tissoires <benjamin.tissoires@xxxxxxxxx>");
diff --git a/drivers/hid/i2c-hid/i2c-hid-of.c b/drivers/hid/i2c-hid/i2c-hid-of.c
new file mode 100644
index 000000000000..4bf7cea92637
--- /dev/null
+++ b/drivers/hid/i2c-hid/i2c-hid-of.c
@@ -0,0 +1,143 @@
+/*
+ * HID over I2C Open Firmware Subclass
+ *
+ * Copyright (c) 2012 Benjamin Tissoires <benjamin.tissoires@xxxxxxxxx>
+ * Copyright (c) 2012 Ecole Nationale de l'Aviation Civile, France
+ * Copyright (c) 2012 Red Hat, Inc
+ *
+ * This code was forked out of the core code, which was partly based on
+ * "USB HID support for Linux":
+ *
+ * Copyright (c) 1999 Andreas Gal
+ * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@xxxxxxx>
+ * Copyright (c) 2005 Michael Haboustak <mike-@xxxxxxxxxxxx> for Concept2, Inc
+ * Copyright (c) 2007-2008 Oliver Neukum
+ * Copyright (c) 2006-2010 Jiri Kosina
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pm.h>
+#include <linux/regulator/consumer.h>
+
+#include "i2c-hid.h"
+
+struct i2c_hid_of {
+ struct i2chid_ops ops;
+
+ struct i2c_client *client;
+ struct regulator_bulk_data supplies[2];
+ int post_power_delay_ms;
+};
+
+static int i2c_hid_of_power_up(struct i2chid_ops *ops)
+{
+ struct i2c_hid_of *ihid_of = container_of(ops, struct i2c_hid_of, ops);
+ struct device *dev = &ihid_of->client->dev;
+ int ret;
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(ihid_of->supplies),
+ ihid_of->supplies);
+ if (ret) {
+ dev_warn(dev, "Failed to enable supplies: %d\n", ret);
+ return ret;
+ }
+
+ if (ihid_of->post_power_delay_ms)
+ msleep(ihid_of->post_power_delay_ms);
+
+ return 0;
+}
+
+static void i2c_hid_of_power_down(struct i2chid_ops *ops)
+{
+ struct i2c_hid_of *ihid_of = container_of(ops, struct i2c_hid_of, ops);
+
+ regulator_bulk_disable(ARRAY_SIZE(ihid_of->supplies),
+ ihid_of->supplies);
+}
+
+static int i2c_hid_of_probe(struct i2c_client *client,
+ const struct i2c_device_id *dev_id)
+{
+ struct device *dev = &client->dev;
+ struct i2c_hid_of *ihid_of;
+ u16 hid_descriptor_address;
+ int ret;
+ u32 val;
+
+ ihid_of = devm_kzalloc(&client->dev, sizeof(*ihid_of), GFP_KERNEL);
+ if (!ihid_of)
+ return -ENOMEM;
+
+ ihid_of->ops.power_up = i2c_hid_of_power_up;
+ ihid_of->ops.power_down = i2c_hid_of_power_down;
+
+ ret = of_property_read_u32(dev->of_node, "hid-descr-addr", &val);
+ if (ret) {
+ dev_err(&client->dev, "HID register address not provided\n");
+ return -ENODEV;
+ }
+ if (val >> 16) {
+ dev_err(&client->dev, "Bad HID register address: 0x%08x\n",
+ val);
+ return -EINVAL;
+ }
+ hid_descriptor_address = val;
+
+ if (!device_property_read_u32(&client->dev, "post-power-on-delay-ms",
+ &val))
+ ihid_of->post_power_delay_ms = val;
+
+ ihid_of->supplies[0].supply = "vdd";
+ ihid_of->supplies[1].supply = "vddl";
+ ret = devm_regulator_bulk_get(&client->dev,
+ ARRAY_SIZE(ihid_of->supplies),
+ ihid_of->supplies);
+ if (ret)
+ return ret;
+
+ return i2c_hid_core_probe(client, &ihid_of->ops,
+ hid_descriptor_address);
+}
+
+static const struct of_device_id i2c_hid_of_match[] = {
+ { .compatible = "hid-over-i2c" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, i2c_hid_of_match);
+
+static const struct i2c_device_id i2c_hid_of_id_table[] = {
+ { "hid", 0 },
+ { "hid-over-i2c", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, i2c_hid_of_id_table);
+
+static struct i2c_driver i2c_hid_of_driver = {
+ .driver = {
+ .name = "i2c_hid_of",
+ .pm = &i2c_hid_core_pm,
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
+ .of_match_table = of_match_ptr(i2c_hid_of_match),
+ },
+
+ .probe = i2c_hid_of_probe,
+ .remove = i2c_hid_core_remove,
+ .shutdown = i2c_hid_core_shutdown,
+ .id_table = i2c_hid_of_id_table,
+};
+
+module_i2c_driver(i2c_hid_of_driver);
+
+MODULE_DESCRIPTION("HID over I2C OF driver");
+MODULE_AUTHOR("Benjamin Tissoires <benjamin.tissoires@xxxxxxxxx>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hid/i2c-hid/i2c-hid.h b/drivers/hid/i2c-hid/i2c-hid.h
index a8c19aef5824..05a7827d211a 100644
--- a/drivers/hid/i2c-hid/i2c-hid.h
+++ b/drivers/hid/i2c-hid/i2c-hid.h
@@ -3,6 +3,7 @@
#ifndef I2C_HID_H
#define I2C_HID_H
+#include <linux/i2c.h>
#ifdef CONFIG_DMI
struct i2c_hid_desc *i2c_hid_get_dmi_i2c_hid_desc_override(uint8_t *i2c_name);
@@ -17,4 +18,25 @@ static inline char *i2c_hid_get_dmi_hid_report_desc_override(uint8_t *i2c_name,
{ return NULL; }
#endif
+/**
+ * struct i2chid_ops - Ops provided to the core.
+ *
+ * @power_up: do sequencing to power up the device.
+ * @power_down: do sequencing to power down the device.
+ * @shutdown_tail: called at the end of shutdown.
+ */
+struct i2chid_ops {
+ int (*power_up)(struct i2chid_ops *ops);
+ void (*power_down)(struct i2chid_ops *ops);
+ void (*shutdown_tail)(struct i2chid_ops *ops);
+};
+
+int i2c_hid_core_probe(struct i2c_client *client, struct i2chid_ops *ops,
+ u16 hid_descriptor_address);
+int i2c_hid_core_remove(struct i2c_client *client);
+
+void i2c_hid_core_shutdown(struct i2c_client *client);
+
+extern const struct dev_pm_ops i2c_hid_core_pm;
+
#endif
diff --git a/include/linux/platform_data/i2c-hid.h b/include/linux/platform_data/i2c-hid.h
deleted file mode 100644
index c628bb5e1061..000000000000
--- a/include/linux/platform_data/i2c-hid.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * HID over I2C protocol implementation
- *
- * Copyright (c) 2012 Benjamin Tissoires <benjamin.tissoires@xxxxxxxxx>
- * Copyright (c) 2012 Ecole Nationale de l'Aviation Civile, France
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-#ifndef __LINUX_I2C_HID_H
-#define __LINUX_I2C_HID_H
-
-#include <linux/regulator/consumer.h>
-#include <linux/types.h>
-
-/**
- * struct i2chid_platform_data - used by hid over i2c implementation.
- * @hid_descriptor_address: i2c register where the HID descriptor is stored.
- * @supplies: regulators for powering on the device.
- * @post_power_delay_ms: delay after powering on before device is usable.
- *
- * Note that it is the responsibility of the platform driver (or the acpi 5.0
- * driver, or the flattened device tree) to setup the irq related to the gpio in
- * the struct i2c_board_info.
- * The platform driver should also setup the gpio according to the device:
- *
- * A typical example is the following:
- * irq = gpio_to_irq(intr_gpio);
- * hkdk4412_i2c_devs5[0].irq = irq; // store the irq in i2c_board_info
- * gpio_request(intr_gpio, "elan-irq");
- * s3c_gpio_setpull(intr_gpio, S3C_GPIO_PULL_UP);
- */
-struct i2c_hid_platform_data {
- u16 hid_descriptor_address;
- struct regulator_bulk_data supplies[2];
- int post_power_delay_ms;
-};
-
-#endif /* __LINUX_I2C_HID_H */
--
2.29.2.222.g5d2a92d10f8-goog