[RFC PATCH v2 3/4] RISC-V: Initial DTS for Microchip ICICLE board

From: Atish Patra
Date: Fri Nov 13 2020 - 15:26:32 EST

Next message: Atish Patra: "[RFC PATCH v2 2/4] dt-bindings: riscv: microchip: Add YAML documentation for the PolarFire SoC"
Previous message: Catalin Marinas: "Re: [PATCH v4 0/3] arm64: cppc: add FFH support using AMUs"
In reply to: Atish Patra: "[RFC PATCH v2 1/4] RISC-V: Add Microchip PolarFire SoC kconfig option"
Next in thread: Atish Patra: "[RFC PATCH v2 2/4] dt-bindings: riscv: microchip: Add YAML documentation for the PolarFire SoC"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Add initial DTS for Microchip ICICLE board having only
essential devcies (clocks, sdhci, ethernet, serial, etc).
The device tree is based on the U-Boot patch.

https://patchwork.ozlabs.org/project/uboot/patch/20201110103414.10142-6-padmarao.begari@xxxxxxxxxxxxx/

Signed-off-by: Atish Patra <atish.patra@xxxxxxx>
---
arch/riscv/boot/dts/Makefile | 1 +
arch/riscv/boot/dts/microchip/Makefile | 2 +
.../microchip/microchip-mpfs-icicle-kit.dts | 54 +++
.../boot/dts/microchip/microchip-mpfs.dtsi | 342 ++++++++++++++++++
4 files changed, 399 insertions(+)
create mode 100644 arch/riscv/boot/dts/microchip/Makefile
create mode 100644 arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts
create mode 100644 arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi

diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile
index ca1f8cbd78c0..3ea94ea0a18a 100644
--- a/arch/riscv/boot/dts/Makefile
+++ b/arch/riscv/boot/dts/Makefile
@@ -1,5 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
subdir-y += sifive
subdir-y += kendryte
+subdir-y += microchip

obj-$(CONFIG_BUILTIN_DTB) := $(addsuffix /, $(subdir-y))
diff --git a/arch/riscv/boot/dts/microchip/Makefile b/arch/riscv/boot/dts/microchip/Makefile
new file mode 100644
index 000000000000..622b12771fd3
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += microchip-mpfs-icicle-kit.dtb
diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts
new file mode 100644
index 000000000000..9a382ab0a799
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Copyright (c) 2020 Microchip Technology Inc */
+
+/dts-v1/;
+
+#include "microchip-mpfs.dtsi"
+
+/* Clock frequency (in Hz) of the rtcclk */
+#define RTCCLK_FREQ 1000000
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ model = "Microchip PolarFire-SoC Icicle Kit";
+ compatible = "microchip,mpfs-icicle-kit", "microchip,polarfire-soc";
+
+ chosen {
+ stdout-path = &serial0;
+ };
+
+ cpus {
+ timebase-frequency = <RTCCLK_FREQ>;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0x40000000>;
+ clocks = <&clkcfg 26>;
+ };
+
+ soc {
+ };
+};
+
+&serial0 {
+ status = "okay";
+};
+
+&serial1 {
+ status = "okay";
+};
+
+&serial2 {
+ status = "okay";
+};
+
+&serial3 {
+ status = "okay";
+};
+
+&sdcard {
+ status = "okay";
+};
+
diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
new file mode 100644
index 000000000000..63ac60f345d8
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
@@ -0,0 +1,342 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Copyright (c) 2020 Microchip Technology Inc */
+
+/dts-v1/;
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ model = "Microchip PolarFire-SoC";
+ compatible = "microchip,polarfire-soc";
+
+ chosen {
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ clock-frequency = <0>;
+ compatible = "sifive,rocket0", "riscv";
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <128>;
+ i-cache-size = <16384>;
+ reg = <0>;
+ riscv,isa = "rv64imac";
+ status = "disabled";
+
+ cpu0_intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+
+ cpu@1 {
+ clock-frequency = <0>;
+ compatible = "sifive,rocket0", "riscv";
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <32>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <32>;
+ mmu-type = "riscv,sv39";
+ reg = <1>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+ status = "okay";
+
+ cpu1_intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+
+ cpu@2 {
+ clock-frequency = <0>;
+ compatible = "sifive,rocket0", "riscv";
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <32>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <32>;
+ mmu-type = "riscv,sv39";
+ reg = <2>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+ status = "okay";
+
+ cpu2_intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+
+ cpu@3 {
+ clock-frequency = <0>;
+ compatible = "sifive,rocket0", "riscv";
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <32>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <32>;
+ mmu-type = "riscv,sv39";
+ reg = <3>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+ status = "okay";
+
+ cpu3_intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+
+ cpu@4 {
+ clock-frequency = <0>;
+ compatible = "sifive,rocket0", "riscv";
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <32>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <32>;
+ mmu-type = "riscv,sv39";
+ reg = <4>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+ status = "okay";
+ cpu4_intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+ };
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ ranges;
+
+ cache-controller@2010000 {
+ compatible = "sifive,fu540-c000-ccache", "cache";
+ cache-block-size = <64>;
+ cache-level = <2>;
+ cache-sets = <1024>;
+ cache-size = <2097152>;
+ cache-unified;
+ interrupt-parent = <&plic>;
+ interrupts = <1 2 3>;
+ reg = <0x0 0x2010000 0x0 0x1000>;
+ };
+
+ clint@2000000 {
+ compatible = "riscv,clint0";
+ reg = <0x0 0x2000000 0x0 0xC000>;
+ interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
+ &cpu1_intc 3 &cpu1_intc 7
+ &cpu2_intc 3 &cpu2_intc 7
+ &cpu3_intc 3 &cpu3_intc 7
+ &cpu4_intc 3 &cpu4_intc 7>;
+ };
+
+ plic: interrupt-controller@c000000 {
+ #interrupt-cells = <1>;
+ compatible = "sifive,plic-1.0.0";
+ reg = <0x0 0xc000000 0x0 0x4000000>;
+ riscv,ndev = <53>;
+ interrupt-controller;
+ interrupts-extended = <&cpu0_intc 11
+ &cpu1_intc 11 &cpu1_intc 9
+ &cpu2_intc 11 &cpu2_intc 9
+ &cpu3_intc 11 &cpu3_intc 9
+ &cpu4_intc 11 &cpu4_intc 9>;
+ };
+
+ dma@3000000 {
+ compatible = "sifive,fu540-c000-pdma";
+ reg = <0x0 0x3000000 0x0 0x8000>;
+ interrupt-parent = <&plic>;
+ interrupts = <23 24 25 26 27 28 29 30>;
+ #dma-cells = <1>;
+ };
+
+ refclk: refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <600000000>;
+ clock-output-names = "msspllclk";
+ };
+
+ clkcfg: clkcfg@20002000 {
+ compatible = "microchip,pfsoc-clkcfg";
+ reg = <0x0 0x20002000 0x0 0x1000>;
+ reg-names = "mss_sysreg";
+ clocks = <&refclk>;
+ #clock-cells = <1>;
+ clock-output-names = "cpuclk", "axiclk", "ahbclk", "ENVMclk", /* 0-3 */
+ "MAC0clk", "MAC1clk", "MMCclk", "TIMERclk", /* 4-7 */
+ "MMUART0clk", "MMUART1clk", "MMUART2clk", "MMUART3clk", /* 8-11 */
+ "MMUART4clk", "SPI0clk", "SPI1clk", "I2C0clk", /* 12-15 */
+ "I2C1clk", "CAN0clk", "CAN1clk", "USBclk", /* 16-19 */
+ "RESERVED", "RTCclk", "QSPIclk", "GPIO0clk", /* 20-23 */
+ "GPIO1clk", "GPIO2clk", "DDRCclk", "FIC0clk", /* 24-27 */
+ "FIC1clk", "FIC2clk", "FIC3clk", "ATHENAclk", "CFMclk"; /* 28-32 */
+ };
+
+ serial0: serial@20000000 {
+ compatible = "ns16550a";
+ reg = <0x0 0x20000000 0x0 0x400>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ interrupt-parent = <&plic>;
+ interrupts = <90>;
+ current-speed = <115200>;
+ clocks = <&clkcfg 8>;
+ status = "disabled";
+ };
+
+ serial1: serial@20100000 {
+ compatible = "ns16550a";
+ reg = <0x0 0x20100000 0x0 0x400>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ interrupt-parent = <&plic>;
+ interrupts = <91>;
+ current-speed = <115200>;
+ clocks = <&clkcfg 9>;
+ status = "disabled";
+ };
+
+ serial2: serial@20102000 {
+ compatible = "ns16550a";
+ reg = <0x0 0x20102000 0x0 0x400>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ interrupt-parent = <&plic>;
+ interrupts = <92>;
+ current-speed = <115200>;
+ clocks = <&clkcfg 10>;
+ status = "disabled";
+ };
+
+ serial3: serial@20104000 {
+ compatible = "ns16550a";
+ reg = <0x0 0x20104000 0x0 0x400>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ interrupt-parent = <&plic>;
+ interrupts = <93>;
+ current-speed = <115200>;
+ clocks = <&clkcfg 11>;
+ status = "disabled";
+ };
+
+ emmc: mmc@20008000 {
+ compatible = "cdns,sd4hc";
+ reg = <0x0 0x20008000 0x0 0x1000>;
+ interrupt-parent = <&plic>;
+ interrupts = <88 89>;
+ pinctrl-names = "default";
+ clocks = <&clkcfg 6>;
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ mmc-ddr-3_3v;
+ max-frequency = <200000000>;
+ non-removable;
+ no-sd;
+ no-sdio;
+ voltage-ranges = <3300 3300>;
+ status = "disabled";
+ };
+
+ sdcard: sdhc@20008000 {
+ compatible = "cdns,sd4hc";
+ reg = <0x0 0x20008000 0x0 0x1000>;
+ interrupt-parent = <&plic>;
+ interrupts = <88>;
+ pinctrl-names = "default";
+ clocks = <&clkcfg 6>;
+ bus-width = <4>;
+ disable-wp;
+ no-1-8-v;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ card-detect-delay = <200>;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ max-frequency = <200000000>;
+ status = "disabled";
+ };
+
+ emac0: ethernet@20110000 {
+ compatible = "cdns,macb";
+ reg = <0x0 0x20110000 0x0 0x2000>;
+ interrupt-parent = <&plic>;
+ interrupts = <64 65 66 67>;
+ local-mac-address = [00 00 00 00 00 00];
+ phy-mode = "sgmii";
+ clocks = <&clkcfg 5>, <&clkcfg 2>;
+ clock-names = "pclk", "hclk";
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy-handle = <&phy0>;
+ phy0: ethernet-phy@8 {
+ reg = <8>;
+ ti,fifo-depth = <0x01>;
+ };
+ };
+
+ emac1: ethernet@20112000 {
+ compatible = "cdns,macb";
+ reg = <0x0 0x20112000 0x0 0x2000>;
+ interrupt-parent = <&plic>;
+ interrupts = <70 71 72 73>;
+ mac-address = [00 00 00 00 00 00];
+ phy-mode = "sgmii";
+ clocks = <&clkcfg 5>, <&clkcfg 2>;
+ clock-names = "pclk", "hclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy1: ethernet-phy@9 {
+ reg = <9>;
+ ti,fifo-depth = <0x01>;
+ };
+ };
+
+ };
+};
--
2.25.1

Next message: Atish Patra: "[RFC PATCH v2 2/4] dt-bindings: riscv: microchip: Add YAML documentation for the PolarFire SoC"
Previous message: Catalin Marinas: "Re: [PATCH v4 0/3] arm64: cppc: add FFH support using AMUs"
In reply to: Atish Patra: "[RFC PATCH v2 1/4] RISC-V: Add Microchip PolarFire SoC kconfig option"
Next in thread: Atish Patra: "[RFC PATCH v2 2/4] dt-bindings: riscv: microchip: Add YAML documentation for the PolarFire SoC"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]