[PATCH 0/6] ARM: mstar: Basic MPLL support

[Daniel Palmer]

This series adds support for the MPLL block that is present in
MStar/SigmaStar ARMv7 SoCs.

This block is intended to be set and forgotten about before
Linux is running so all it actually does it read the registers
and calculate what the output frequencies should be.

We only care about this block because there are upstream dividers,
gates, muxes etc that need something between the input crystal
and themselves to calculate their own rates.

I think this needs to be applied after the GPIO series[0] that
is currently inflight.

0 - https://lore.kernel.org/linux-gpio/20201109121731.1537580-1-daniel@xxxxxxxx/

Daniel Palmer (6):
  dt-bindings: clk: mstar msc313 mpll binding header
  dt-bindings: clk: mstar msc313 mpll binding description
  clk: mstar: MStar/SigmaStar MPLL driver
  ARM: mstar: Select MSTAR_MSC313_MPLL
  ARM: mstar: Add the external clocks to the base dsti
  ARM: mstar: Add mpll to base dtsi

 .../bindings/clock/mstar,msc313-mpll.yaml     |  58 ++++++
 MAINTAINERS                                   |   3 +
 arch/arm/boot/dts/mstar-v7.dtsi               |  27 +++
 arch/arm/mach-mstar/Kconfig                   |   1 +
 drivers/clk/Kconfig                           |   1 +
 drivers/clk/Makefile                          |   1 +
 drivers/clk/mstar/Kconfig                     |   5 +
 drivers/clk/mstar/Makefile                    |   6 +
 drivers/clk/mstar/clk-msc313-mpll.c           | 177 ++++++++++++++++++
 include/dt-bindings/clock/mstar-msc313-mpll.h |  19 ++
 10 files changed, 298 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/mstar,msc313-mpll.yaml
 create mode 100644 drivers/clk/mstar/Kconfig
 create mode 100644 drivers/clk/mstar/Makefile
 create mode 100644 drivers/clk/mstar/clk-msc313-mpll.c
 create mode 100644 include/dt-bindings/clock/mstar-msc313-mpll.h

-- 
2.29.2