[PATCH] dt-bindings: dmaengine: Convert Qualcomm ADM bindings to yaml

[Jonathan McDowell]

Converts the device tree bindings for the Qualcomm Application Data
Mover (ADM) DMA controller over to YAML schemas.

Signed-off-by: Jonathan McDowell <noodles@xxxxxxxx>
---
 .../devicetree/bindings/dma/qcom,adm.yaml     | 102 ++++++++++++++++++
 .../devicetree/bindings/dma/qcom_adm.txt      |  61 -----------
 2 files changed, 102 insertions(+), 61 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/dma/qcom,adm.yaml
 delete mode 100644 Documentation/devicetree/bindings/dma/qcom_adm.txt

diff --git a/Documentation/devicetree/bindings/dma/qcom,adm.yaml b/Documentation/devicetree/bindings/dma/qcom,adm.yaml
new file mode 100644
index 000000000000..353d85d3326d
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/qcom,adm.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/qcom,adm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QCOM ADM DMA Controller
+
+maintainers:
+  - Jonathan McDowell <noodles@xxxxxxxx>
+
+description: |
+  QCOM Application Data Mover (ADM) DMA controller found in the MSM8x60
+  and IPQ/APQ8064 platforms.
+
+properties:
+  compatible:
+    oneOf:
+      - const: qcom,adm
+
+  reg:
+    maxItems: 1
+    description:
+      Address range for DMA registers
+
+  interrupts:
+    maxItems: 1
+    description:
+      Should contain one interrupt shared by all channels
+
+  "#dma-cells":
+    const: 2
+    description:
+      First cell denotes the channel number.  Second cell denotes CRCI
+      (client rate control interface) flow control assignment. If no
+      flow control is required, use 0.
+
+  clocks:
+    maxItems: 2
+    description:
+      Should contain the core clock and interface clock.
+
+  clock-names:
+    items:
+      - const: core
+      - const: iface
+
+  resets:
+    maxItems: 4
+    description:
+      Must contain an entry for each entry in reset names.
+
+  reset-names:
+    items:
+      - const: clk
+      - const: c0
+      - const: c1
+      - const: c2
+
+  qcom,ee:
+    maxItems: 1
+    description:
+      Indicates the security domain identifier used in the secure world.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - "#dma-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - qcom,ee
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/qcom,gcc-ipq806x.h>
+
+    adm_dma: dma@18300000 {
+             compatible = "qcom,adm";
+             reg = <0x18300000 0x100000>;
+             interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+             #dma-cells = <2>;
+
+             clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
+             clock-names = "core", "iface";
+
+             resets = <&gcc ADM0_RESET>,
+                      <&gcc ADM0_C0_RESET>,
+                      <&gcc ADM0_C1_RESET>,
+                      <&gcc ADM0_C2_RESET>;
+             reset-names = "clk", "c0", "c1", "c2";
+             qcom,ee = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/qcom_adm.txt b/Documentation/devicetree/bindings/dma/qcom_adm.txt
deleted file mode 100644
index 9d3b2f917b7b..000000000000
--- a/Documentation/devicetree/bindings/dma/qcom_adm.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-QCOM ADM DMA Controller
-
-Required properties:
-- compatible: must contain "qcom,adm" for IPQ/APQ8064 and MSM8960
-- reg: Address range for DMA registers
-- interrupts: Should contain one interrupt shared by all channels
-- #dma-cells: must be <2>.  First cell denotes the channel number.  Second cell
-  denotes CRCI (client rate control interface) flow control assignment.
-- clocks: Should contain the core clock and interface clock.
-- clock-names: Must contain "core" for the core clock and "iface" for the
-  interface clock.
-- resets: Must contain an entry for each entry in reset names.
-- reset-names: Must include the following entries:
-  - clk
-  - c0
-  - c1
-  - c2
-- qcom,ee: indicates the security domain identifier used in the secure world.
-
-Example:
-		adm_dma: dma@18300000 {
-			compatible = "qcom,adm";
-			reg = <0x18300000 0x100000>;
-			interrupts = <0 170 0>;
-			#dma-cells = <2>;
-
-			clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
-			clock-names = "core", "iface";
-
-			resets = <&gcc ADM0_RESET>,
-				<&gcc ADM0_C0_RESET>,
-				<&gcc ADM0_C1_RESET>,
-				<&gcc ADM0_C2_RESET>;
-			reset-names = "clk", "c0", "c1", "c2";
-			qcom,ee = <0>;
-		};
-
-DMA clients must use the format descripted in the dma.txt file, using a three
-cell specifier for each channel.
-
-Each dmas request consists of 3 cells:
- 1. phandle pointing to the DMA controller
- 2. channel number
- 3. CRCI assignment, if applicable.  If no CRCI flow control is required, use 0.
-    The CRCI is used for flow control.  It identifies the peripheral device that
-    is the source/destination for the transferred data.
-
-Example:
-
-	spi4: spi@1a280000 {
-		spi-max-frequency = <50000000>;
-
-		pinctrl-0 = <&spi_pins>;
-		pinctrl-names = "default";
-
-		cs-gpios = <&qcom_pinmux 20 0>;
-
-		dmas = <&adm_dma 6 9>,
-			<&adm_dma 5 10>;
-		dma-names = "rx", "tx";
-	};
-- 
2.29.2