Re: [PATCH v3 1/2] dt-bindings: Document the hi3559a clock bindings

[Rob Herring]

On Sat, 14 Nov 2020 00:22:36 +0000, Dongjiu Geng wrote:
> Add DT bindings documentation for hi3559a SoC clock.
> 
> Signed-off-by: Dongjiu Geng <gengdongjiu@xxxxxxxxxx>
> ---
>  .../clock/hisilicon,hi3559av100-clock.yaml    |  65 +++++++
>  include/dt-bindings/clock/hi3559av100-clock.h | 165 ++++++++++++++++++
>  2 files changed, 230 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/hisilicon,hi3559av100-clock.yaml
>  create mode 100644 include/dt-bindings/clock/hi3559av100-clock.h
> 


My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/clock/hisilicon,hi3559av100-clock.example.dts:20.23-27.11: Warning (unit_address_vs_reg): /example-0/clock0: node has a reg or ranges property, but no unit name
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/hisilicon,hi3559av100-clock.example.dt.yaml: clock0: compatible: ['hisilicon,hi3559av100-clock', 'syscon'] is too long
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/hisilicon,hi3559av100-clock.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/hisilicon,hi3559av100-clock.example.dt.yaml: clock0: compatible: Additional items are not allowed ('syscon' was unexpected)
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/hisilicon,hi3559av100-clock.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/hisilicon,hi3559av100-clock.example.dt.yaml: clock0: #reset-cells:0:0: 1 was expected
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/hisilicon,hi3559av100-clock.yaml


See https://patchwork.ozlabs.org/patch/1399891

The base for the patch is generally the last rc1. Any dependencies
should be noted.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.