[PATCH v2 0/3] Add events to trace remoteproc lifecycle

[Rishabh Bhatnagar]

Insert tracepoints in mdt_loader, qcom_scm and remoteproc_core drivers.
These tracepoints will be used to analyze the time taken
at each step during bootup/shutdown of the remoteproc. Tracepoints
in mdt_loader driver provides information about location and size
of firmware segments being loaded. Also trace the scm pas calls
used to boot/load remote processors.

Changelog:

v2 -> v1:
- Add traces in qcom_scm driver
- Add traces in remoteproc core to trace the remoteproc state
- Trace the physical address where segment is loaded in mdt_loader

Rishabh Bhatnagar (3):
  soc: qcom: Add tracepoints to mdt loader
  firmware: scm: Add tracepoints to scm driver for pas calls
  remoteproc: Add ftrace events to trace lifecycle of remoteprocs

 drivers/firmware/qcom_scm.c          |  9 ++++
 drivers/remoteproc/remoteproc_core.c | 19 +++++++-
 drivers/soc/qcom/mdt_loader.c        |  7 +++
 include/trace/events/mdt_loader.h    | 38 +++++++++++++++
 include/trace/events/qcom_scm.h      | 34 ++++++++++++++
 include/trace/events/remoteproc.h    | 91 ++++++++++++++++++++++++++++++++++++
 6 files changed, 197 insertions(+), 1 deletion(-)
 create mode 100644 include/trace/events/mdt_loader.h
 create mode 100644 include/trace/events/qcom_scm.h
 create mode 100644 include/trace/events/remoteproc.h

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project