Re: [RFC PATCH v2 3/4] RISC-V: Initial DTS for Microchip ICICLE board

From: Bin Meng
Date: Mon Nov 16 2020 - 21:15:10 EST

Next message: kernel test robot: "Re: [PATCH v2 1/3] soc: qcom: Add tracepoints to mdt loader"
Previous message: KP Singh: "[PATCH bpf-next v3 2/2] bpf: Add tests for bpf_lsm_set_bprm_opts"
Next in thread: Atish Patra: "Re: [RFC PATCH v2 3/4] RISC-V: Initial DTS for Microchip ICICLE board"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Sat, Nov 14, 2020 at 4:29 AM Atish Patra <atish.patra@xxxxxxx> wrote:
>
> Add initial DTS for Microchip ICICLE board having only
> essential devcies (clocks, sdhci, ethernet, serial, etc).

typo: devices

> The device tree is based on the U-Boot patch.
>
> https://patchwork.ozlabs.org/project/uboot/patch/20201110103414.10142-6-padmarao.begari@xxxxxxxxxxxxx/
>
> Signed-off-by: Atish Patra <atish.patra@xxxxxxx>
> ---
> arch/riscv/boot/dts/Makefile | 1 +
> arch/riscv/boot/dts/microchip/Makefile | 2 +
> .../microchip/microchip-mpfs-icicle-kit.dts | 54 +++
> .../boot/dts/microchip/microchip-mpfs.dtsi | 342 ++++++++++++++++++
> 4 files changed, 399 insertions(+)
> create mode 100644 arch/riscv/boot/dts/microchip/Makefile
> create mode 100644 arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts
> create mode 100644 arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
>
> diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile
> index ca1f8cbd78c0..3ea94ea0a18a 100644
> --- a/arch/riscv/boot/dts/Makefile
> +++ b/arch/riscv/boot/dts/Makefile
> @@ -1,5 +1,6 @@
> # SPDX-License-Identifier: GPL-2.0
> subdir-y += sifive
> subdir-y += kendryte
> +subdir-y += microchip
>
> obj-$(CONFIG_BUILTIN_DTB) := $(addsuffix /, $(subdir-y))
> diff --git a/arch/riscv/boot/dts/microchip/Makefile b/arch/riscv/boot/dts/microchip/Makefile
> new file mode 100644
> index 000000000000..622b12771fd3
> --- /dev/null
> +++ b/arch/riscv/boot/dts/microchip/Makefile
> @@ -0,0 +1,2 @@
> +# SPDX-License-Identifier: GPL-2.0
> +dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += microchip-mpfs-icicle-kit.dtb
> diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts
> new file mode 100644
> index 000000000000..9a382ab0a799
> --- /dev/null
> +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts
> @@ -0,0 +1,54 @@
> +// SPDX-License-Identifier: GPL-2.0+

Please make this dual-licensed, GPL or MIT.
See https://github.com/polarfire-soc/meta-polarfire-soc-yocto-bsp/blob/master/recipes-kernel/linux/files/icicle-kit-es/icicle-kit-es-a000-microchip.dts

> +/* Copyright (c) 2020 Microchip Technology Inc */
> +
> +/dts-v1/;
> +
> +#include "microchip-mpfs.dtsi"
> +
> +/* Clock frequency (in Hz) of the rtcclk */
> +#define RTCCLK_FREQ 1000000
> +
> +/ {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + model = "Microchip PolarFire-SoC Icicle Kit";
> + compatible = "microchip,mpfs-icicle-kit", "microchip,polarfire-soc";
> +
> + chosen {
> + stdout-path = &serial0;
> + };
> +
> + cpus {
> + timebase-frequency = <RTCCLK_FREQ>;
> + };
> +
> + memory@80000000 {
> + device_type = "memory";
> + reg = <0x0 0x80000000 0x0 0x40000000>;
> + clocks = <&clkcfg 26>;
> + };
> +
> + soc {
> + };
> +};
> +
> +&serial0 {
> + status = "okay";
> +};
> +
> +&serial1 {
> + status = "okay";
> +};
> +
> +&serial2 {
> + status = "okay";
> +};
> +
> +&serial3 {
> + status = "okay";
> +};
> +
> +&sdcard {
> + status = "okay";
> +};
> +
> diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> new file mode 100644
> index 000000000000..63ac60f345d8
> --- /dev/null
> +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> @@ -0,0 +1,342 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/* Copyright (c) 2020 Microchip Technology Inc */
> +
> +/dts-v1/;
> +
> +/ {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + model = "Microchip PolarFire-SoC";
> + compatible = "microchip,polarfire-soc";
> +
> + chosen {
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu@0 {
> + clock-frequency = <0>;
> + compatible = "sifive,rocket0", "riscv";
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <128>;
> + i-cache-size = <16384>;
> + reg = <0>;
> + riscv,isa = "rv64imac";
> + status = "disabled";
> +
> + cpu0_intc: interrupt-controller {
> + #interrupt-cells = <1>;
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + };
> + };
> +
> + cpu@1 {
> + clock-frequency = <0>;
> + compatible = "sifive,rocket0", "riscv";
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <32768>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <32>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <64>;
> + i-cache-size = <32768>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <32>;
> + mmu-type = "riscv,sv39";
> + reg = <1>;
> + riscv,isa = "rv64imafdc";
> + tlb-split;
> + status = "okay";
> +
> + cpu1_intc: interrupt-controller {
> + #interrupt-cells = <1>;
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + };
> + };
> +
> + cpu@2 {
> + clock-frequency = <0>;
> + compatible = "sifive,rocket0", "riscv";
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <32768>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <32>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <64>;
> + i-cache-size = <32768>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <32>;
> + mmu-type = "riscv,sv39";
> + reg = <2>;
> + riscv,isa = "rv64imafdc";
> + tlb-split;
> + status = "okay";
> +
> + cpu2_intc: interrupt-controller {
> + #interrupt-cells = <1>;
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + };
> + };
> +
> + cpu@3 {
> + clock-frequency = <0>;
> + compatible = "sifive,rocket0", "riscv";
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <32768>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <32>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <64>;
> + i-cache-size = <32768>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <32>;
> + mmu-type = "riscv,sv39";
> + reg = <3>;
> + riscv,isa = "rv64imafdc";
> + tlb-split;
> + status = "okay";
> +
> + cpu3_intc: interrupt-controller {
> + #interrupt-cells = <1>;
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + };
> + };
> +
> + cpu@4 {
> + clock-frequency = <0>;
> + compatible = "sifive,rocket0", "riscv";
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <32768>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <32>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <64>;
> + i-cache-size = <32768>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <32>;
> + mmu-type = "riscv,sv39";
> + reg = <4>;
> + riscv,isa = "rv64imafdc";
> + tlb-split;
> + status = "okay";
> + cpu4_intc: interrupt-controller {
> + #interrupt-cells = <1>;
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + };
> + };
> + };
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + compatible = "simple-bus";
> + ranges;
> +
> + cache-controller@2010000 {
> + compatible = "sifive,fu540-c000-ccache", "cache";
> + cache-block-size = <64>;
> + cache-level = <2>;
> + cache-sets = <1024>;
> + cache-size = <2097152>;
> + cache-unified;
> + interrupt-parent = <&plic>;
> + interrupts = <1 2 3>;
> + reg = <0x0 0x2010000 0x0 0x1000>;
> + };
> +
> + clint@2000000 {
> + compatible = "riscv,clint0";
> + reg = <0x0 0x2000000 0x0 0xC000>;
> + interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
> + &cpu1_intc 3 &cpu1_intc 7
> + &cpu2_intc 3 &cpu2_intc 7
> + &cpu3_intc 3 &cpu3_intc 7
> + &cpu4_intc 3 &cpu4_intc 7>;
> + };
> +
> + plic: interrupt-controller@c000000 {
> + #interrupt-cells = <1>;
> + compatible = "sifive,plic-1.0.0";
> + reg = <0x0 0xc000000 0x0 0x4000000>;
> + riscv,ndev = <53>;
> + interrupt-controller;
> + interrupts-extended = <&cpu0_intc 11
> + &cpu1_intc 11 &cpu1_intc 9
> + &cpu2_intc 11 &cpu2_intc 9
> + &cpu3_intc 11 &cpu3_intc 9
> + &cpu4_intc 11 &cpu4_intc 9>;
> + };
> +
> + dma@3000000 {
> + compatible = "sifive,fu540-c000-pdma";
> + reg = <0x0 0x3000000 0x0 0x8000>;
> + interrupt-parent = <&plic>;
> + interrupts = <23 24 25 26 27 28 29 30>;
> + #dma-cells = <1>;
> + };
> +
> + refclk: refclk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <600000000>;
> + clock-output-names = "msspllclk";
> + };
> +
> + clkcfg: clkcfg@20002000 {
> + compatible = "microchip,pfsoc-clkcfg";
> + reg = <0x0 0x20002000 0x0 0x1000>;
> + reg-names = "mss_sysreg";
> + clocks = <&refclk>;
> + #clock-cells = <1>;
> + clock-output-names = "cpuclk", "axiclk", "ahbclk", "ENVMclk", /* 0-3 */
> + "MAC0clk", "MAC1clk", "MMCclk", "TIMERclk", /* 4-7 */
> + "MMUART0clk", "MMUART1clk", "MMUART2clk", "MMUART3clk", /* 8-11 */
> + "MMUART4clk", "SPI0clk", "SPI1clk", "I2C0clk", /* 12-15 */
> + "I2C1clk", "CAN0clk", "CAN1clk", "USBclk", /* 16-19 */
> + "RESERVED", "RTCclk", "QSPIclk", "GPIO0clk", /* 20-23 */
> + "GPIO1clk", "GPIO2clk", "DDRCclk", "FIC0clk", /* 24-27 */
> + "FIC1clk", "FIC2clk", "FIC3clk", "ATHENAclk", "CFMclk"; /* 28-32 */

Should all these names be lower case?

> + };
> +
> + serial0: serial@20000000 {
> + compatible = "ns16550a";
> + reg = <0x0 0x20000000 0x0 0x400>;
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + interrupt-parent = <&plic>;
> + interrupts = <90>;
> + current-speed = <115200>;
> + clocks = <&clkcfg 8>;
> + status = "disabled";
> + };
> +
> + serial1: serial@20100000 {
> + compatible = "ns16550a";
> + reg = <0x0 0x20100000 0x0 0x400>;
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + interrupt-parent = <&plic>;
> + interrupts = <91>;
> + current-speed = <115200>;
> + clocks = <&clkcfg 9>;
> + status = "disabled";
> + };
> +
> + serial2: serial@20102000 {
> + compatible = "ns16550a";
> + reg = <0x0 0x20102000 0x0 0x400>;
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + interrupt-parent = <&plic>;
> + interrupts = <92>;
> + current-speed = <115200>;
> + clocks = <&clkcfg 10>;
> + status = "disabled";
> + };
> +
> + serial3: serial@20104000 {
> + compatible = "ns16550a";
> + reg = <0x0 0x20104000 0x0 0x400>;
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + interrupt-parent = <&plic>;
> + interrupts = <93>;
> + current-speed = <115200>;
> + clocks = <&clkcfg 11>;
> + status = "disabled";
> + };
> +
> + emmc: mmc@20008000 {
> + compatible = "cdns,sd4hc";
> + reg = <0x0 0x20008000 0x0 0x1000>;
> + interrupt-parent = <&plic>;
> + interrupts = <88 89>;
> + pinctrl-names = "default";
> + clocks = <&clkcfg 6>;
> + bus-width = <4>;
> + cap-mmc-highspeed;
> + mmc-ddr-3_3v;
> + max-frequency = <200000000>;
> + non-removable;
> + no-sd;
> + no-sdio;
> + voltage-ranges = <3300 3300>;
> + status = "disabled";
> + };
> +
> + sdcard: sdhc@20008000 {
> + compatible = "cdns,sd4hc";
> + reg = <0x0 0x20008000 0x0 0x1000>;
> + interrupt-parent = <&plic>;
> + interrupts = <88>;
> + pinctrl-names = "default";
> + clocks = <&clkcfg 6>;
> + bus-width = <4>;
> + disable-wp;
> + no-1-8-v;
> + cap-mmc-highspeed;
> + cap-sd-highspeed;
> + card-detect-delay = <200>;
> + sd-uhs-sdr12;
> + sd-uhs-sdr25;
> + sd-uhs-sdr50;
> + sd-uhs-sdr104;
> + max-frequency = <200000000>;
> + status = "disabled";
> + };
> +
> + emac0: ethernet@20110000 {
> + compatible = "cdns,macb";
> + reg = <0x0 0x20110000 0x0 0x2000>;
> + interrupt-parent = <&plic>;
> + interrupts = <64 65 66 67>;
> + local-mac-address = [00 00 00 00 00 00];
> + phy-mode = "sgmii";
> + clocks = <&clkcfg 5>, <&clkcfg 2>;
> + clock-names = "pclk", "hclk";
> + status = "disabled";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> + phy-handle = <&phy0>;
> + phy0: ethernet-phy@8 {
> + reg = <8>;
> + ti,fifo-depth = <0x01>;
> + };
> + };
> +
> + emac1: ethernet@20112000 {
> + compatible = "cdns,macb";
> + reg = <0x0 0x20112000 0x0 0x2000>;
> + interrupt-parent = <&plic>;
> + interrupts = <70 71 72 73>;
> + mac-address = [00 00 00 00 00 00];
> + phy-mode = "sgmii";
> + clocks = <&clkcfg 5>, <&clkcfg 2>;
> + clock-names = "pclk", "hclk";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + phy1: ethernet-phy@9 {
> + reg = <9>;
> + ti,fifo-depth = <0x01>;
> + };
> + };
> +
> + };
> +};

Regards,
Bin

Next message: kernel test robot: "Re: [PATCH v2 1/3] soc: qcom: Add tracepoints to mdt loader"
Previous message: KP Singh: "[PATCH bpf-next v3 2/2] bpf: Add tests for bpf_lsm_set_bprm_opts"
Next in thread: Atish Patra: "Re: [RFC PATCH v2 3/4] RISC-V: Initial DTS for Microchip ICICLE board"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]