[PATCH 5.4 087/151] pinctrl: intel: Set default bias in case no particular value given

From: Greg Kroah-Hartman
Date: Tue Nov 17 2020 - 08:26:52 EST


From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>

[ Upstream commit f3c75e7a9349d1d33eb53ddc1b31640994969f73 ]

When GPIO library asks pin control to set the bias, it doesn't pass
any value of it and argument is considered boolean (and this is true
for ACPI GpioIo() / GpioInt() resources, by the way). Thus, individual
drivers must behave well, when they got the resistance value of 1 Ohm,
i.e. transforming it to sane default.

In case of Intel pin control hardware the 5 kOhm sounds plausible
because on one hand it's a minimum of resistors present in all
hardware generations and at the same time it's high enough to minimize
leakage current (will be only 200 uA with the above choice).

Fixes: e57725eabf87 ("pinctrl: intel: Add support for hardware debouncer")
Reported-by: Jamie McClymont <jamie@xxxxxxxxxx>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Acked-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/pinctrl/intel/pinctrl-intel.c | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c
index 83981ad66a71e..4e89bbf6b76a0 100644
--- a/drivers/pinctrl/intel/pinctrl-intel.c
+++ b/drivers/pinctrl/intel/pinctrl-intel.c
@@ -662,6 +662,10 @@ static int intel_config_set_pull(struct intel_pinctrl *pctrl, unsigned int pin,

value |= PADCFG1_TERM_UP;

+ /* Set default strength value in case none is given */
+ if (arg == 1)
+ arg = 5000;
+
switch (arg) {
case 20000:
value |= PADCFG1_TERM_20K << PADCFG1_TERM_SHIFT;
@@ -684,6 +688,10 @@ static int intel_config_set_pull(struct intel_pinctrl *pctrl, unsigned int pin,
case PIN_CONFIG_BIAS_PULL_DOWN:
value &= ~(PADCFG1_TERM_UP | PADCFG1_TERM_MASK);

+ /* Set default strength value in case none is given */
+ if (arg == 1)
+ arg = 5000;
+
switch (arg) {
case 20000:
value |= PADCFG1_TERM_20K << PADCFG1_TERM_SHIFT;
--
2.27.0