[PATCH v4 0/3] mainline Protonic WD3 board

[Oleksij Rempel]

changes v4:
- spell fix for "virtual"
- change SPI CAN freq to 10MHz
- change SPI CAN irq from IRQ_TYPE_EDGE_FALLING to IRQ_TYPE_LEVEL_LOW 

changes v3:
- fix checkpatch varnings
- add "virtual" to the vendor-prefixes.yaml 

changes v2:
- fix comment: WD2 -> WD3

Oleksij Rempel (3):
  dt-bindings: vendor-prefixes: add "virtual" prefix
  dt-bindings: arm: fsl: add Protonic WD3 board
  ARM: dts: add Protonic WD3 board

 .../devicetree/bindings/arm/fsl.yaml          |   1 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm/boot/dts/Makefile                    |   1 +
 arch/arm/boot/dts/imx6qp-prtwd3.dts           | 553 ++++++++++++++++++
 4 files changed, 557 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6qp-prtwd3.dts

-- 
2.29.2