Re: [PATCH 4/9] platform/surface: aggregator: Add trace points

From: Steven Rostedt
Date: Tue Nov 17 2020 - 11:44:16 EST

Next message: Andy Shevchenko: "Re: [PATCH] drivers: gpio: use of_match_ptr() and ACPI_PTR() macros"
Previous message: Arnaud POULIQUEN: "Re: [PATCH v5 8/8] rpmsg: Turn name service into a stand alone driver"
Next in thread: Maximilian Luz: "Re: [PATCH 4/9] platform/surface: aggregator: Add trace points"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Sun, 15 Nov 2020 20:21:38 +0100
Maximilian Luz <luzmaximilian@xxxxxxxxx> wrote:

> Add trace points to the Surface Aggregator subsystem core. These trace
> points can be used to track packets, requests, and allocations. They are
> further intended for debugging and testing/validation, specifically in
> combination with the error injection capabilities introduced in the
> subsequent commit.
>
> Signed-off-by: Maximilian Luz <luzmaximilian@xxxxxxxxx>
> ---

> /*
> * Lock packet and commit with memory barrier. If this packet has
> * already been locked, it's going to be removed and completed by
> @@ -1154,6 +1167,8 @@ static void ssh_ptl_timeout_reap(struct work_struct *work)
> ktime_t next = KTIME_MAX;
> bool resub = false;
>
> + trace_ssam_ptl_timeout_reap("pending", atomic_read(&ptl->pending.count));

I noticed that the only two places that use timeout_reap, both have
"pending" as a string. Is this necessary to save? Would an enum work?

> +
> /*
> * Mark reaper as "not pending". This is done before checking any
> * packets to avoid lost-update type problems.
> @@ -1185,6 +1200,8 @@ static void ssh_ptl_timeout_reap(struct work_struct *work)
> // check if we still have some tries left
> try = ssh_packet_priority_get_try(READ_ONCE(p->priority));
> if (likely(try < SSH_PTL_MAX_PACKET_TRIES)) {
> + trace_ssam_packet_timeout(p);
> +
> /*
> * Submission fails if the packet has been locked, is
> * already queued, or the layer is being shut down.
> @@ -1202,6 +1219,8 @@ static void ssh_ptl_timeout_reap(struct work_struct *work)
> if (test_and_set_bit(SSH_PACKET_SF_LOCKED_BIT, &p->state))
> continue;
>
> + trace_ssam_packet_timeout(p);
> +
> /*
> * We have now marked the packet as locked. Thus it cannot be
> * added to the pending list again after we've removed it here.
> @@ -1366,6 +1385,8 @@ static size_t ssh_ptl_rx_eval(struct ssh_ptl *ptl, struct ssam_span *source)
> if (!frame) // not enough data
> return aligned.ptr - source->ptr;
>
> + trace_ssam_rx_frame_received(frame);
> +
> switch (frame->type) {
> case SSH_FRAME_TYPE_ACK:
> ssh_ptl_acknowledge(ptl, frame->seq);
> diff --git a/drivers/platform/surface/aggregator/ssh_request_layer.c b/drivers/platform/surface/aggregator/ssh_request_layer.c
> index 2b0368bb2d79..0d3384fd2d4c 100644
> --- a/drivers/platform/surface/aggregator/ssh_request_layer.c
> +++ b/drivers/platform/surface/aggregator/ssh_request_layer.c
> @@ -21,6 +21,8 @@
> #include "ssh_packet_layer.h"
> #include "ssh_request_layer.h"
>
> +#include "trace.h"
> +
>
> /*
> * SSH_RTL_REQUEST_TIMEOUT - Request timeout.
> @@ -141,6 +143,8 @@ static void ssh_rtl_complete_with_status(struct ssh_request *rqst, int status)
> {
> struct ssh_rtl *rtl = ssh_request_rtl(rqst);
>
> + trace_ssam_request_complete(rqst, status);
> +
> // rtl/ptl may not be set if we're cancelling before submitting
> rtl_dbg_cond(rtl, "rtl: completing request (rqid: 0x%04x, status: %d)\n",
> ssh_request_get_rqid_safe(rqst), status);
> @@ -154,6 +158,8 @@ static void ssh_rtl_complete_with_rsp(struct ssh_request *rqst,
> {
> struct ssh_rtl *rtl = ssh_request_rtl(rqst);
>
> + trace_ssam_request_complete(rqst, 0);
> +
> rtl_dbg(rtl, "rtl: completing request with response (rqid: 0x%04x)\n",
> ssh_request_get_rqid(rqst));
>
> @@ -326,6 +332,8 @@ static void ssh_rtl_tx_work_fn(struct work_struct *work)
> */
> int ssh_rtl_submit(struct ssh_rtl *rtl, struct ssh_request *rqst)
> {
> + trace_ssam_request_submit(rqst);
> +
> /*
> * Ensure that requests expecting a response are sequenced. If this
> * invariant ever changes, see the comment in ssh_rtl_complete() on what
> @@ -438,6 +446,8 @@ static void ssh_rtl_complete(struct ssh_rtl *rtl,
> struct ssh_request *p, *n;
> u16 rqid = get_unaligned_le16(&command->rqid);
>
> + trace_ssam_rx_response_received(command, command_data->len);
> +
> /*
> * Get request from pending based on request ID and mark it as response
> * received and locked.
> @@ -688,6 +698,8 @@ bool ssh_rtl_cancel(struct ssh_request *rqst, bool pending)
> if (test_and_set_bit(SSH_REQUEST_SF_CANCELED_BIT, &rqst->state))
> return true;
>
> + trace_ssam_request_cancel(rqst);
> +
> if (pending)
> canceled = ssh_rtl_cancel_pending(rqst);
> else
> @@ -777,6 +789,8 @@ static void ssh_rtl_timeout_reap(struct work_struct *work)
> ktime_t timeout = rtl->rtx_timeout.timeout;
> ktime_t next = KTIME_MAX;
>
> + trace_ssam_rtl_timeout_reap("pending", atomic_read(&rtl->pending.count));
> +
> /*
> * Mark reaper as "not pending". This is done before checking any
> * requests to avoid lost-update type problems.
> @@ -825,6 +839,8 @@ static void ssh_rtl_timeout_reap(struct work_struct *work)
>
> // cancel and complete the request
> list_for_each_entry_safe(r, n, &claimed, node) {
> + trace_ssam_request_timeout(r);
> +
> /*
> * At this point we've removed the packet from pending. This
> * means that we've obtained the last (only) reference of the
> @@ -850,6 +866,8 @@ static void ssh_rtl_timeout_reap(struct work_struct *work)
> static void ssh_rtl_rx_event(struct ssh_rtl *rtl, const struct ssh_command *cmd,
> const struct ssam_span *data)
> {
> + trace_ssam_rx_event_received(cmd, data->len);
> +
> rtl_dbg(rtl, "rtl: handling event (rqid: 0x%04x)\n",
> get_unaligned_le16(&cmd->rqid));
>
> diff --git a/drivers/platform/surface/aggregator/trace.h b/drivers/platform/surface/aggregator/trace.h
> new file mode 100644
> index 000000000000..ead052c1ffab
> --- /dev/null
> +++ b/drivers/platform/surface/aggregator/trace.h
> @@ -0,0 +1,616 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Trace points for SSAM/SSH.
> + *
> + * Copyright (C) 2020 Maximilian Luz <luzmaximilian@xxxxxxxxx>
> + */
> +
> +#undef TRACE_SYSTEM
> +#define TRACE_SYSTEM surface_aggregator
> +
> +#if !defined(_SURFACE_AGGREGATOR_TRACE_H) || defined(TRACE_HEADER_MULTI_READ)
> +#define _SURFACE_AGGREGATOR_TRACE_H
> +
> +#include <linux/surface_aggregator/serial_hub.h>
> +
> +#include <asm/unaligned.h>
> +#include <linux/tracepoint.h>
> +
> +
> +TRACE_DEFINE_ENUM(SSH_FRAME_TYPE_DATA_SEQ);
> +TRACE_DEFINE_ENUM(SSH_FRAME_TYPE_DATA_NSQ);
> +TRACE_DEFINE_ENUM(SSH_FRAME_TYPE_ACK);
> +TRACE_DEFINE_ENUM(SSH_FRAME_TYPE_NAK);
> +
> +TRACE_DEFINE_ENUM(SSH_PACKET_SF_LOCKED_BIT);
> +TRACE_DEFINE_ENUM(SSH_PACKET_SF_QUEUED_BIT);
> +TRACE_DEFINE_ENUM(SSH_PACKET_SF_PENDING_BIT);
> +TRACE_DEFINE_ENUM(SSH_PACKET_SF_TRANSMITTING_BIT);
> +TRACE_DEFINE_ENUM(SSH_PACKET_SF_TRANSMITTED_BIT);
> +TRACE_DEFINE_ENUM(SSH_PACKET_SF_ACKED_BIT);
> +TRACE_DEFINE_ENUM(SSH_PACKET_SF_CANCELED_BIT);
> +TRACE_DEFINE_ENUM(SSH_PACKET_SF_COMPLETED_BIT);
> +
> +TRACE_DEFINE_ENUM(SSH_PACKET_TY_FLUSH_BIT);
> +TRACE_DEFINE_ENUM(SSH_PACKET_TY_SEQUENCED_BIT);
> +TRACE_DEFINE_ENUM(SSH_PACKET_TY_BLOCKING_BIT);
> +
> +TRACE_DEFINE_ENUM(SSH_PACKET_FLAGS_SF_MASK);
> +TRACE_DEFINE_ENUM(SSH_PACKET_FLAGS_TY_MASK);
> +
> +TRACE_DEFINE_ENUM(SSH_REQUEST_SF_LOCKED_BIT);
> +TRACE_DEFINE_ENUM(SSH_REQUEST_SF_QUEUED_BIT);
> +TRACE_DEFINE_ENUM(SSH_REQUEST_SF_PENDING_BIT);
> +TRACE_DEFINE_ENUM(SSH_REQUEST_SF_TRANSMITTING_BIT);
> +TRACE_DEFINE_ENUM(SSH_REQUEST_SF_TRANSMITTED_BIT);
> +TRACE_DEFINE_ENUM(SSH_REQUEST_SF_RSPRCVD_BIT);
> +TRACE_DEFINE_ENUM(SSH_REQUEST_SF_CANCELED_BIT);
> +TRACE_DEFINE_ENUM(SSH_REQUEST_SF_COMPLETED_BIT);
> +
> +TRACE_DEFINE_ENUM(SSH_REQUEST_TY_FLUSH_BIT);
> +TRACE_DEFINE_ENUM(SSH_REQUEST_TY_HAS_RESPONSE_BIT);
> +
> +TRACE_DEFINE_ENUM(SSH_REQUEST_FLAGS_SF_MASK);
> +TRACE_DEFINE_ENUM(SSH_REQUEST_FLAGS_TY_MASK);
> +
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_SAM);
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_BAT);
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_TMP);
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_PMC);
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_FAN);
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_PoM);
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_DBG);
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_KBD);
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_FWU);
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_UNI);
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_LPC);
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_TCL);
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_SFL);
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_KIP);
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_EXT);
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_BLD);
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_BAS);
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_SEN);
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_SRQ);
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_MCU);
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_HID);
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_TCH);
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_BKL);
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_TAM);
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_ACC);
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_UFI);
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_USC);
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_PEN);
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_VID);
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_AUD);
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_SMC);
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_KPD);
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_REG);
> +
> +
> +#define SSAM_PTR_UID_LEN 9
> +#define SSAM_U8_FIELD_NOT_APPLICABLE ((u16)-1)
> +#define SSAM_SEQ_NOT_APPLICABLE ((u16)-1)
> +#define SSAM_RQID_NOT_APPLICABLE ((u32)-1)
> +#define SSAM_SSH_TC_NOT_APPLICABLE 0
> +
> +
> +#ifndef _SURFACE_AGGREGATOR_TRACE_HELPERS
> +#define _SURFACE_AGGREGATOR_TRACE_HELPERS
> +
> +/**
> + * ssam_trace_ptr_uid() - Convert the pointer to a non-pointer UID string.
> + * @ptr: The pointer to convert.
> + * @uid_str: A buffer of length SSAM_PTR_UID_LEN where the UID will be stored.
> + *
> + * Converts the given pointer into a UID string that is safe to be shared
> + * with userspace and logs, i.e. doesn't give away the real memory location.
> + */
> +static inline void ssam_trace_ptr_uid(const void *ptr, char *uid_str)
> +{
> + char buf[2 * sizeof(void *) + 1];
> +
> + snprintf(buf, ARRAY_SIZE(buf), "%p", ptr);
> + memcpy(uid_str, &buf[ARRAY_SIZE(buf) - SSAM_PTR_UID_LEN],
> + SSAM_PTR_UID_LEN);

Is the above snprintf() to have the ptr turn into a hash?

Otherwise, couldn't you just truncate the value of ptr?

In any case, you want to make sure that ARRAY_SIZE(buf) is always bigger
than, or equal to, SSAM_PTR_UID_LEN, and you should probably stick a:

BUILD_BUG_ON(ARRAY_SIZE(buf) < SSAM_PTR_UID_LEN);

in there, which would cause the build to fail if that was ever the case.

> +}
> +
> +/**
> + * ssam_trace_get_packet_seq() - Read the packet's sequence ID.
> + * @p: The packet.
> + *
> + * Return: Returns the packet's sequence ID (SEQ) field if present, or
> + * %SSAM_SEQ_NOT_APPLICABLE if not (e.g. flush packet).
> + */
> +static inline u16 ssam_trace_get_packet_seq(const struct ssh_packet *p)
> +{
> + if (!p->data.ptr || p->data.len < SSH_MESSAGE_LENGTH(0))
> + return SSAM_SEQ_NOT_APPLICABLE;
> +
> + return p->data.ptr[SSH_MSGOFFSET_FRAME(seq)];
> +}
> +
> +/**
> + * ssam_trace_get_request_id() - Read the packet's request ID.
> + * @p: The packet.
> + *
> + * Return: Returns the packet's request ID (RQID) field if the packet
> + * represents a request with command data, or %SSAM_RQID_NOT_APPLICABLE if not
> + * (e.g. flush request, control packet).
> + */
> +static inline u32 ssam_trace_get_request_id(const struct ssh_packet *p)
> +{
> + if (!p->data.ptr || p->data.len < SSH_COMMAND_MESSAGE_LENGTH(0))
> + return SSAM_RQID_NOT_APPLICABLE;
> +
> + return get_unaligned_le16(&p->data.ptr[SSH_MSGOFFSET_COMMAND(rqid)]);
> +}
> +
> +/**
> + * ssam_trace_get_request_tc() - Read the packet's request target category.
> + * @p: The packet.
> + *
> + * Return: Returns the packet's request target category (TC) field if the
> + * packet represents a request with command data, or %SSAM_TC_NOT_APPLICABLE
> + * if not (e.g. flush request, control packet).
> + */
> +static inline u32 ssam_trace_get_request_tc(const struct ssh_packet *p)
> +{
> + if (!p->data.ptr || p->data.len < SSH_COMMAND_MESSAGE_LENGTH(0))
> + return SSAM_SSH_TC_NOT_APPLICABLE;
> +
> + return get_unaligned_le16(&p->data.ptr[SSH_MSGOFFSET_COMMAND(tc)]);
> +}
> +
> +#endif /* _SURFACE_AGGREGATOR_TRACE_HELPERS */
> +
> +#define ssam_trace_get_command_field_u8(packet, field) \
> + ((!packet || packet->data.len < SSH_COMMAND_MESSAGE_LENGTH(0)) \
> + ? 0 : p->data.ptr[SSH_MSGOFFSET_COMMAND(field)])

I think you want the above to be:

? 0 : packet->data.ptr[SSH_MSGOFFSET_COMMAND(field)])

The only reason it worked, is because the caller passed in "p".

> +
> +#define ssam_show_generic_u8_field(value) \
> + __print_symbolic(value, \
> + { SSAM_U8_FIELD_NOT_APPLICABLE, "N/A" } \
> + )
> +
> +
> +#define ssam_show_frame_type(ty) \
> + __print_symbolic(ty, \
> + { SSH_FRAME_TYPE_DATA_SEQ, "DSEQ" }, \
> + { SSH_FRAME_TYPE_DATA_NSQ, "DNSQ" }, \
> + { SSH_FRAME_TYPE_ACK, "ACK" }, \
> + { SSH_FRAME_TYPE_NAK, "NAK" } \
> + )
> +
> +#define ssam_show_packet_type(type) \
> + __print_flags(flags & SSH_PACKET_FLAGS_TY_MASK, "", \
> + { BIT(SSH_PACKET_TY_FLUSH_BIT), "F" }, \
> + { BIT(SSH_PACKET_TY_SEQUENCED_BIT), "S" }, \
> + { BIT(SSH_PACKET_TY_BLOCKING_BIT), "B" } \
> + )
> +
> +#define ssam_show_packet_state(state) \
> + __print_flags(flags & SSH_PACKET_FLAGS_SF_MASK, "", \
> + { BIT(SSH_PACKET_SF_LOCKED_BIT), "L" }, \
> + { BIT(SSH_PACKET_SF_QUEUED_BIT), "Q" }, \
> + { BIT(SSH_PACKET_SF_PENDING_BIT), "P" }, \
> + { BIT(SSH_PACKET_SF_TRANSMITTING_BIT), "S" }, \
> + { BIT(SSH_PACKET_SF_TRANSMITTED_BIT), "T" }, \
> + { BIT(SSH_PACKET_SF_ACKED_BIT), "A" }, \
> + { BIT(SSH_PACKET_SF_CANCELED_BIT), "C" }, \
> + { BIT(SSH_PACKET_SF_COMPLETED_BIT), "F" } \
> + )
> +
> +#define ssam_show_packet_seq(seq) \
> + __print_symbolic(seq, \
> + { SSAM_SEQ_NOT_APPLICABLE, "N/A" } \
> + )
> +
> +
> +#define ssam_show_request_type(flags) \
> + __print_flags(flags & SSH_REQUEST_FLAGS_TY_MASK, "", \
> + { BIT(SSH_REQUEST_TY_FLUSH_BIT), "F" }, \
> + { BIT(SSH_REQUEST_TY_HAS_RESPONSE_BIT), "R" } \
> + )
> +
> +#define ssam_show_request_state(flags) \
> + __print_flags(flags & SSH_REQUEST_FLAGS_SF_MASK, "", \
> + { BIT(SSH_REQUEST_SF_LOCKED_BIT), "L" }, \
> + { BIT(SSH_REQUEST_SF_QUEUED_BIT), "Q" }, \
> + { BIT(SSH_REQUEST_SF_PENDING_BIT), "P" }, \
> + { BIT(SSH_REQUEST_SF_TRANSMITTING_BIT), "S" }, \
> + { BIT(SSH_REQUEST_SF_TRANSMITTED_BIT), "T" }, \
> + { BIT(SSH_REQUEST_SF_RSPRCVD_BIT), "A" }, \
> + { BIT(SSH_REQUEST_SF_CANCELED_BIT), "C" }, \
> + { BIT(SSH_REQUEST_SF_COMPLETED_BIT), "F" } \
> + )
> +
> +#define ssam_show_request_id(rqid) \
> + __print_symbolic(rqid, \
> + { SSAM_RQID_NOT_APPLICABLE, "N/A" } \
> + )
> +
> +#define ssam_show_ssh_tc(rqid) \
> + __print_symbolic(rqid, \
> + { SSAM_SSH_TC_NOT_APPLICABLE, "N/A" }, \
> + { SSAM_SSH_TC_SAM, "SAM" }, \
> + { SSAM_SSH_TC_BAT, "BAT" }, \
> + { SSAM_SSH_TC_TMP, "TMP" }, \
> + { SSAM_SSH_TC_PMC, "PMC" }, \
> + { SSAM_SSH_TC_FAN, "FAN" }, \
> + { SSAM_SSH_TC_PoM, "PoM" }, \
> + { SSAM_SSH_TC_DBG, "DBG" }, \
> + { SSAM_SSH_TC_KBD, "KBD" }, \
> + { SSAM_SSH_TC_FWU, "FWU" }, \
> + { SSAM_SSH_TC_UNI, "UNI" }, \
> + { SSAM_SSH_TC_LPC, "LPC" }, \
> + { SSAM_SSH_TC_TCL, "TCL" }, \
> + { SSAM_SSH_TC_SFL, "SFL" }, \
> + { SSAM_SSH_TC_KIP, "KIP" }, \
> + { SSAM_SSH_TC_EXT, "EXT" }, \
> + { SSAM_SSH_TC_BLD, "BLD" }, \
> + { SSAM_SSH_TC_BAS, "BAS" }, \
> + { SSAM_SSH_TC_SEN, "SEN" }, \
> + { SSAM_SSH_TC_SRQ, "SRQ" }, \
> + { SSAM_SSH_TC_MCU, "MCU" }, \
> + { SSAM_SSH_TC_HID, "HID" }, \
> + { SSAM_SSH_TC_TCH, "TCH" }, \
> + { SSAM_SSH_TC_BKL, "BKL" }, \
> + { SSAM_SSH_TC_TAM, "TAM" }, \
> + { SSAM_SSH_TC_ACC, "ACC" }, \
> + { SSAM_SSH_TC_UFI, "UFI" }, \
> + { SSAM_SSH_TC_USC, "USC" }, \
> + { SSAM_SSH_TC_PEN, "PEN" }, \
> + { SSAM_SSH_TC_VID, "VID" }, \
> + { SSAM_SSH_TC_AUD, "AUD" }, \
> + { SSAM_SSH_TC_SMC, "SMC" }, \
> + { SSAM_SSH_TC_KPD, "KPD" }, \
> + { SSAM_SSH_TC_REG, "REG" } \
> + )
> +
> +
> +DECLARE_EVENT_CLASS(ssam_frame_class,
> + TP_PROTO(const struct ssh_frame *frame),
> +
> + TP_ARGS(frame),
> +
> + TP_STRUCT__entry(
> + __field(u8, type)
> + __field(u8, seq)
> + __field(u16, len)
> + ),
> +
> + TP_fast_assign(
> + __entry->type = frame->type;
> + __entry->seq = frame->seq;
> + __entry->len = get_unaligned_le16(&frame->len);
> + ),
> +
> + TP_printk("ty=%s, seq=0x%02x, len=%u",
> + ssam_show_frame_type(__entry->type),
> + __entry->seq,
> + __entry->len
> + )
> +);
> +
> +#define DEFINE_SSAM_FRAME_EVENT(name) \
> + DEFINE_EVENT(ssam_frame_class, ssam_##name, \
> + TP_PROTO(const struct ssh_frame *frame), \
> + TP_ARGS(frame) \
> + )
> +
> +
> +DECLARE_EVENT_CLASS(ssam_command_class,
> + TP_PROTO(const struct ssh_command *cmd, u16 len),
> +
> + TP_ARGS(cmd, len),
> +
> + TP_STRUCT__entry(
> + __field(u16, rqid)
> + __field(u16, len)
> + __field(u8, tc)
> + __field(u8, cid)
> + __field(u8, iid)
> + ),
> +
> + TP_fast_assign(
> + __entry->rqid = get_unaligned_le16(&cmd->rqid);
> + __entry->tc = cmd->tc;
> + __entry->cid = cmd->cid;
> + __entry->iid = cmd->iid;
> + __entry->len = len;
> + ),
> +
> + TP_printk("rqid=0x%04x, tc=%s, cid=0x%02x, iid=0x%02x, len=%u",
> + __entry->rqid,
> + ssam_show_ssh_tc(__entry->tc),
> + __entry->cid,
> + __entry->iid,
> + __entry->len
> + )
> +);
> +
> +#define DEFINE_SSAM_COMMAND_EVENT(name) \
> + DEFINE_EVENT(ssam_command_class, ssam_##name, \
> + TP_PROTO(const struct ssh_command *cmd, u16 len), \
> + TP_ARGS(cmd, len) \
> + )
> +
> +
> +DECLARE_EVENT_CLASS(ssam_packet_class,
> + TP_PROTO(const struct ssh_packet *packet),
> +
> + TP_ARGS(packet),
> +
> + TP_STRUCT__entry(
> + __field(unsigned long, state)
> + __array(char, uid, SSAM_PTR_UID_LEN)
> + __field(u8, priority)
> + __field(u16, length)
> + __field(u16, seq)
> + ),
> +
> + TP_fast_assign(
> + __entry->state = READ_ONCE(packet->state);
> + ssam_trace_ptr_uid(packet, __entry->uid);
> + __entry->priority = READ_ONCE(packet->priority);

I'm curious about the need for the read once here.

The rest seems fine.

-- Steve

> + __entry->length = packet->data.len;
> + __entry->seq = ssam_trace_get_packet_seq(packet);
> + ),
> +
> + TP_printk("uid=%s, seq=%s, ty=%s, pri=0x%02x, len=%u, sta=%s",
> + __entry->uid,
> + ssam_show_packet_seq(__entry->seq),
> + ssam_show_packet_type(__entry->state),
> + __entry->priority,
> + __entry->length,
> + ssam_show_packet_state(__entry->state)
> + )
> +);
> +
> +#define DEFINE_SSAM_PACKET_EVENT(name) \
> + DEFINE_EVENT(ssam_packet_class, ssam_##name, \
> + TP_PROTO(const struct ssh_packet *packet), \
> + TP_ARGS(packet) \
> + )
> +
> +
> +DECLARE_EVENT_CLASS(ssam_packet_status_class,
> + TP_PROTO(const struct ssh_packet *packet, int status),
> +
> + TP_ARGS(packet, status),
> +
> + TP_STRUCT__entry(
> + __field(unsigned long, state)
> + __field(int, status)
> + __array(char, uid, SSAM_PTR_UID_LEN)
> + __field(u8, priority)
> + __field(u16, length)
> + __field(u16, seq)
> + ),
> +
> + TP_fast_assign(
> + __entry->state = READ_ONCE(packet->state);
> + __entry->status = status;
> + ssam_trace_ptr_uid(packet, __entry->uid);
> + __entry->priority = READ_ONCE(packet->priority);
> + __entry->length = packet->data.len;
> + __entry->seq = ssam_trace_get_packet_seq(packet);
> + ),
> +
> + TP_printk("uid=%s, seq=%s, ty=%s, pri=0x%02x, len=%u, sta=%s, status=%d",
> + __entry->uid,
> + ssam_show_packet_seq(__entry->seq),
> + ssam_show_packet_type(__entry->state),
> + __entry->priority,
> + __entry->length,
> + ssam_show_packet_state(__entry->state),
> + __entry->status
> + )
> +);
> +
> +#define DEFINE_SSAM_PACKET_STATUS_EVENT(name) \
> + DEFINE_EVENT(ssam_packet_status_class, ssam_##name, \
> + TP_PROTO(const struct ssh_packet *packet, int status), \
> + TP_ARGS(packet, status) \
> + )
> +
> +

Next message: Andy Shevchenko: "Re: [PATCH] drivers: gpio: use of_match_ptr() and ACPI_PTR() macros"
Previous message: Arnaud POULIQUEN: "Re: [PATCH v5 8/8] rpmsg: Turn name service into a stand alone driver"
Next in thread: Maximilian Luz: "Re: [PATCH 4/9] platform/surface: aggregator: Add trace points"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]