[PATCH 4/4] dt-bindings: hwmon: convert AD ADM1275 bindings to dt-schema

[Krzysztof Kozlowski]

Convert the Analog Devices ADM1275 bindings to dt-schema.

Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
---
 .../bindings/hwmon/adi,adm1275.yaml           | 58 +++++++++++++++++++
 .../devicetree/bindings/hwmon/adm1275.txt     | 25 --------
 Documentation/hwmon/adm1275.rst               |  2 +-
 3 files changed, 59 insertions(+), 26 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
 delete mode 100644 Documentation/devicetree/bindings/hwmon/adm1275.txt

diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
new file mode 100644
index 000000000000..2cad28c499dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/adi,adm1275.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADM1075/ADM127x/ADM129x digital power monitors
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@xxxxxxxxxx>
+
+description: |
+  The ADM1293 and ADM1294 are high accuracy integrated digital power monitors
+  that offer digital current, voltage, and power monitoring using an on-chip,
+  12-bit analog-to-digital converter (ADC), communicated through a PMBus
+  compliant I2C interface.
+
+  Datasheets:
+    https://www.analog.com/en/products/adm1294.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adm1075
+      - adi,adm1272
+      - adi,adm1275
+      - adi,adm1276
+      - adi,adm1278
+      - adi,adm1293
+      - adi,adm1294
+
+  reg:
+    maxItems: 1
+
+  shunt-resistor-micro-ohms:
+    description:
+      Shunt resistor value in micro-Ohm.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        power-sensor@10 {
+            compatible = "adi,adm1272";
+            reg = <0x10>;
+            shunt-resistor-micro-ohms = <500>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/adm1275.txt b/Documentation/devicetree/bindings/hwmon/adm1275.txt
deleted file mode 100644
index 1ecd03f3da4d..000000000000
--- a/Documentation/devicetree/bindings/hwmon/adm1275.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-adm1275 properties
-
-Required properties:
-- compatible: Must be one of the supported compatible strings:
-	- "adi,adm1075" for adm1075
-	- "adi,adm1272" for adm1272
-	- "adi,adm1275" for adm1275
-	- "adi,adm1276" for adm1276
-	- "adi,adm1278" for adm1278
-	- "adi,adm1293" for adm1293
-	- "adi,adm1294" for adm1294
-- reg: I2C address
-
-Optional properties:
-
-- shunt-resistor-micro-ohms
-	Shunt resistor value in micro-Ohm
-
-Example:
-
-adm1272@10 {
-	compatible = "adi,adm1272";
-	reg = <0x10>;
-	shunt-resistor-micro-ohms = <500>;
-};
diff --git a/Documentation/hwmon/adm1275.rst b/Documentation/hwmon/adm1275.rst
index ce6528f90e4a..804590eeabdc 100644
--- a/Documentation/hwmon/adm1275.rst
+++ b/Documentation/hwmon/adm1275.rst
@@ -83,7 +83,7 @@ or current scaling. Reported voltages, currents, and power are raw measurements,
 and will typically have to be scaled.
 
 The shunt value in micro-ohms can be set via device tree at compile-time. Please
-refer to the Documentation/devicetree/bindings/hwmon/adm1275.txt for bindings
+refer to the Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml for bindings
 if the device tree is used.
 
 Platform data support
-- 
2.25.1