[PATCH v7 03/13] misc: bcm-vk: add autoload support

[Scott Branden]

Add support to load and boot images on card automatically.
The kernel module parameter auto_load can be passed in as false to disable
such support on probe.
As well, nr_scratch_pages can be specified to allocate more or less scratch
memory on init as needed for desired card operation.

Co-developed-by: Desmond Yan <desmond.yan@xxxxxxxxxxxx>
Signed-off-by: Desmond Yan <desmond.yan@xxxxxxxxxxxx>
Co-developed-by: James Hu <james.hu@xxxxxxxxxxxx>
Signed-off-by: James Hu <james.hu@xxxxxxxxxxxx>
Signed-off-by: Scott Branden <scott.branden@xxxxxxxxxxxx>
---
 drivers/misc/bcm-vk/bcm_vk.h     | 250 +++++++++++
 drivers/misc/bcm-vk/bcm_vk_dev.c | 723 +++++++++++++++++++++++++++++++
 2 files changed, 973 insertions(+)

diff --git a/drivers/misc/bcm-vk/bcm_vk.h b/drivers/misc/bcm-vk/bcm_vk.h
index 9152785199ab..c4fb61a84e41 100644
--- a/drivers/misc/bcm-vk/bcm_vk.h
+++ b/drivers/misc/bcm-vk/bcm_vk.h
@@ -6,10 +6,187 @@
 #ifndef BCM_VK_H
 #define BCM_VK_H
 
+#include <linux/firmware.h>
 #include <linux/pci.h>
+#include <linux/sched/signal.h>
 
 #define DRV_MODULE_NAME		"bcm-vk"
 
+/*
+ * Load Image is completed in two stages:
+ *
+ * 1) When the VK device boot-up, M7 CPU runs and executes the BootROM.
+ * The Secure Boot Loader (SBL) as part of the BootROM will run
+ * to open up ITCM for host to push BOOT1 image.
+ * SBL will authenticate the image before jumping to BOOT1 image.
+ *
+ * 2) Because BOOT1 image is a secured image, we also called it the
+ * Secure Boot Image (SBI). At second stage, SBI will initialize DDR
+ * and wait for host to push BOOT2 image to DDR.
+ * SBI will authenticate the image before jumping to BOOT2 image.
+ *
+ */
+/* Location of registers of interest in BAR0 */
+
+/* Request register for Secure Boot Loader (SBL) download */
+#define BAR_CODEPUSH_SBL		0x400
+/* Start of ITCM */
+#define CODEPUSH_BOOT1_ENTRY		0x00400000
+#define CODEPUSH_MASK		        0xfffff000
+#define CODEPUSH_BOOTSTART		BIT(0)
+
+/* Boot Status register */
+#define BAR_BOOT_STATUS			0x404
+
+#define SRAM_OPEN			BIT(16)
+#define DDR_OPEN			BIT(17)
+
+/* Firmware loader progress status definitions */
+#define FW_LOADER_ACK_SEND_MORE_DATA	BIT(18)
+#define FW_LOADER_ACK_IN_PROGRESS	BIT(19)
+#define FW_LOADER_ACK_RCVD_ALL_DATA	BIT(20)
+
+/* Boot1/2 is running in standalone mode */
+#define BOOT_STDALONE_RUNNING		BIT(21)
+
+/* definitions for boot status register */
+#define BOOT_STATE_MASK			(0xffffffff & \
+					 ~(FW_LOADER_ACK_SEND_MORE_DATA | \
+					   FW_LOADER_ACK_IN_PROGRESS | \
+					   BOOT_STDALONE_RUNNING))
+
+#define BOOT_ERR_SHIFT			4
+#define BOOT_ERR_MASK			(0xf << BOOT_ERR_SHIFT)
+#define BOOT_PROG_MASK			0xf
+
+#define BROM_STATUS_NOT_RUN		0x2
+#define BROM_NOT_RUN			(SRAM_OPEN | BROM_STATUS_NOT_RUN)
+#define BROM_STATUS_COMPLETE		0x6
+#define BROM_RUNNING			(SRAM_OPEN | BROM_STATUS_COMPLETE)
+#define BOOT1_STATUS_COMPLETE		0x6
+#define BOOT1_RUNNING			(DDR_OPEN | BOOT1_STATUS_COMPLETE)
+#define BOOT2_STATUS_COMPLETE		0x6
+#define BOOT2_RUNNING			(FW_LOADER_ACK_RCVD_ALL_DATA | \
+					 BOOT2_STATUS_COMPLETE)
+
+/* Boot request for Secure Boot Image (SBI) */
+#define BAR_CODEPUSH_SBI		0x408
+/* 64M mapped to BAR2 */
+#define CODEPUSH_BOOT2_ENTRY		0x60000000
+
+#define BAR_CARD_STATUS			0x410
+
+#define BAR_BOOT1_STDALONE_PROGRESS	0x420
+#define BOOT1_STDALONE_SUCCESS		(BIT(13) | BIT(14))
+#define BOOT1_STDALONE_PROGRESS_MASK	BOOT1_STDALONE_SUCCESS
+
+#define BAR_METADATA_VERSION		0x440
+#define BAR_OS_UPTIME			0x444
+#define BAR_CHIP_ID			0x448
+#define MAJOR_SOC_REV(_chip_id)		(((_chip_id) >> 20) & 0xf)
+
+#define BAR_CARD_TEMPERATURE		0x45c
+
+#define BAR_CARD_VOLTAGE		0x460
+
+#define BAR_CARD_ERR_LOG		0x464
+
+#define BAR_CARD_ERR_MEM		0x468
+
+#define BAR_CARD_PWR_AND_THRE		0x46c
+
+#define BAR_CARD_STATIC_INFO		0x470
+
+#define BAR_INTF_VER			0x47c
+#define BAR_INTF_VER_MAJOR_SHIFT	16
+#define BAR_INTF_VER_MASK		0xffff
+/*
+ * major and minor semantic version numbers supported
+ * Please update as required on interface changes
+ */
+#define SEMANTIC_MAJOR			1
+#define SEMANTIC_MINOR			0
+
+/*
+ * first door bell reg, ie for queue = 0.  Only need the first one, as
+ * we will use the queue number to derive the others
+ */
+#define VK_BAR0_REGSEG_DB_BASE		0x484
+#define VK_BAR0_REGSEG_DB_REG_GAP	8 /*
+					   * DB register gap,
+					   * DB1 at 0x48c and DB2 at 0x494
+					   */
+
+/* reset register and specific values */
+#define VK_BAR0_RESET_DB_NUM		3
+#define VK_BAR0_RESET_DB_SOFT		0xffffffff
+#define VK_BAR0_RESET_DB_HARD		0xfffffffd
+#define VK_BAR0_RESET_RAMPDUMP		0xa0000000
+
+#define VK_BAR0_Q_DB_BASE(q_num)	(VK_BAR0_REGSEG_DB_BASE + \
+					 ((q_num) * VK_BAR0_REGSEG_DB_REG_GAP))
+#define VK_BAR0_RESET_DB_BASE		(VK_BAR0_REGSEG_DB_BASE + \
+					 (VK_BAR0_RESET_DB_NUM * VK_BAR0_REGSEG_DB_REG_GAP))
+
+#define BAR_BOOTSRC_SELECT		0xc78
+/* BOOTSRC definitions */
+#define BOOTSRC_SOFT_ENABLE		BIT(14)
+
+/* Card OS Firmware version size */
+#define BAR_FIRMWARE_TAG_SIZE		50
+#define FIRMWARE_STATUS_PRE_INIT_DONE	0x1f
+
+/*
+ * BAR1
+ */
+
+/* BAR1 message q definition */
+
+/* indicate if msgq ctrl in BAR1 is populated */
+#define VK_BAR1_MSGQ_DEF_RDY		0x60c0
+/* ready marker value for the above location, normal boot2 */
+#define VK_BAR1_MSGQ_RDY_MARKER		0xbeefcafe
+/* ready marker value for the above location, normal boot2 */
+#define VK_BAR1_DIAG_RDY_MARKER		0xdeadcafe
+/* number of msgqs in BAR1 */
+#define VK_BAR1_MSGQ_NR			0x60c4
+/* BAR1 queue control structure offset */
+#define VK_BAR1_MSGQ_CTRL_OFF		0x60c8
+
+/* BAR1 ucode and boot1 version tag */
+#define VK_BAR1_UCODE_VER_TAG		0x6170
+#define VK_BAR1_BOOT1_VER_TAG		0x61b0
+#define VK_BAR1_VER_TAG_SIZE		64
+
+/* Memory to hold the DMA buffer memory address allocated for boot2 download */
+#define VK_BAR1_DMA_BUF_OFF_HI		0x61e0
+#define VK_BAR1_DMA_BUF_OFF_LO		(VK_BAR1_DMA_BUF_OFF_HI + 4)
+#define VK_BAR1_DMA_BUF_SZ		(VK_BAR1_DMA_BUF_OFF_HI + 8)
+
+/* Scratch memory allocated on host for VK */
+#define VK_BAR1_SCRATCH_OFF_HI		0x61f0
+#define VK_BAR1_SCRATCH_OFF_LO		(VK_BAR1_SCRATCH_OFF_HI + 4)
+#define VK_BAR1_SCRATCH_SZ_ADDR		(VK_BAR1_SCRATCH_OFF_HI + 8)
+#define VK_BAR1_SCRATCH_DEF_NR_PAGES	32
+
+/* BAR1 DAUTH info */
+#define VK_BAR1_DAUTH_BASE_ADDR		0x6200
+#define VK_BAR1_DAUTH_STORE_SIZE	0x48
+#define VK_BAR1_DAUTH_VALID_SIZE	0x8
+#define VK_BAR1_DAUTH_MAX		4
+#define VK_BAR1_DAUTH_STORE_ADDR(x) \
+		(VK_BAR1_DAUTH_BASE_ADDR + \
+		 (x) * (VK_BAR1_DAUTH_STORE_SIZE + VK_BAR1_DAUTH_VALID_SIZE))
+#define VK_BAR1_DAUTH_VALID_ADDR(x) \
+		(VK_BAR1_DAUTH_STORE_ADDR(x) + VK_BAR1_DAUTH_STORE_SIZE)
+
+/* BAR1 SOTP AUTH and REVID info */
+#define VK_BAR1_SOTP_REVID_BASE_ADDR	0x6340
+#define VK_BAR1_SOTP_REVID_SIZE		0x10
+#define VK_BAR1_SOTP_REVID_MAX		2
+#define VK_BAR1_SOTP_REVID_ADDR(x) \
+		(VK_BAR1_SOTP_REVID_BASE_ADDR + (x) * VK_BAR1_SOTP_REVID_SIZE)
+
 /* VK device supports a maximum of 3 bars */
 #define MAX_BAR	3
 
@@ -21,9 +198,82 @@ enum pci_barno {
 
 #define BCM_VK_NUM_TTY 2
 
+/* DAUTH related info */
+struct bcm_vk_dauth_key {
+	char store[VK_BAR1_DAUTH_STORE_SIZE];
+	char valid[VK_BAR1_DAUTH_VALID_SIZE];
+};
+
+struct bcm_vk_dauth_info {
+	struct bcm_vk_dauth_key keys[VK_BAR1_DAUTH_MAX];
+};
+
 struct bcm_vk {
 	struct pci_dev *pdev;
 	void __iomem *bar[MAX_BAR];
+
+	struct bcm_vk_dauth_info dauth_info;
+
+	int devid; /* dev id allocated */
+
+	struct workqueue_struct *wq_thread;
+	struct work_struct wq_work; /* work queue for deferred job */
+	unsigned long wq_offload[1]; /* various flags on wq requested */
+	void *tdma_vaddr; /* test dma segment virtual addr */
+	dma_addr_t tdma_addr; /* test dma segment bus addr */
+};
+
+/* wq offload work items bits definitions */
+enum bcm_vk_wq_offload_flags {
+	BCM_VK_WQ_DWNLD_PEND = 0,
+	BCM_VK_WQ_DWNLD_AUTO = 1,
 };
 
+/*
+ * check if PCIe interface is down on read.  Use it when it is
+ * certain that _val should never be all ones.
+ */
+#define BCM_VK_INTF_IS_DOWN(val) ((val) == 0xffffffff)
+
+static inline u32 vkread32(struct bcm_vk *vk, enum pci_barno bar, u64 offset)
+{
+	return readl(vk->bar[bar] + offset);
+}
+
+static inline void vkwrite32(struct bcm_vk *vk,
+			     u32 value,
+			     enum pci_barno bar,
+			     u64 offset)
+{
+	writel(value, vk->bar[bar] + offset);
+}
+
+static inline u8 vkread8(struct bcm_vk *vk, enum pci_barno bar, u64 offset)
+{
+	return readb(vk->bar[bar] + offset);
+}
+
+static inline void vkwrite8(struct bcm_vk *vk,
+			    u8 value,
+			    enum pci_barno bar,
+			    u64 offset)
+{
+	writeb(value, vk->bar[bar] + offset);
+}
+
+static inline bool bcm_vk_msgq_marker_valid(struct bcm_vk *vk)
+{
+	u32 rdy_marker = 0;
+	u32 fw_status;
+
+	fw_status = vkread32(vk, BAR_0, VK_BAR_FWSTS);
+
+	if ((fw_status & VK_FWSTS_READY) == VK_FWSTS_READY)
+		rdy_marker = vkread32(vk, BAR_1, VK_BAR1_MSGQ_DEF_RDY);
+
+	return (rdy_marker == VK_BAR1_MSGQ_RDY_MARKER);
+}
+
+int bcm_vk_auto_load_all_images(struct bcm_vk *vk);
+
 #endif
diff --git a/drivers/misc/bcm-vk/bcm_vk_dev.c b/drivers/misc/bcm-vk/bcm_vk_dev.c
index 14afe2477b97..adc3103c7012 100644
--- a/drivers/misc/bcm-vk/bcm_vk_dev.c
+++ b/drivers/misc/bcm-vk/bcm_vk_dev.c
@@ -3,16 +3,72 @@
  * Copyright 2018-2020 Broadcom.
  */
 
+#include <linux/delay.h>
 #include <linux/dma-mapping.h>
+#include <linux/firmware.h>
+#include <linux/fs.h>
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/pci_regs.h>
+#include <uapi/linux/misc/bcm_vk.h>
 
 #include "bcm_vk.h"
 
 #define PCI_DEVICE_ID_VALKYRIE	0x5e87
 #define PCI_DEVICE_ID_VIPER	0x5e88
 
+static DEFINE_IDA(bcm_vk_ida);
+
+enum soc_idx {
+	VALKYRIE_A0 = 0,
+	VALKYRIE_B0,
+	VIPER,
+	VK_IDX_INVALID
+};
+
+enum img_idx {
+	IMG_PRI = 0,
+	IMG_SEC,
+	IMG_PER_TYPE_MAX
+};
+
+struct load_image_entry {
+	const u32 image_type;
+	const char *image_name[IMG_PER_TYPE_MAX];
+};
+
+#define NUM_BOOT_STAGES 2
+/* default firmware images names */
+static const struct load_image_entry image_tab[][NUM_BOOT_STAGES] = {
+	[VALKYRIE_A0] = {
+		{VK_IMAGE_TYPE_BOOT1, {"vk_a0-boot1.bin", "vk-boot1.bin"}},
+		{VK_IMAGE_TYPE_BOOT2, {"vk_a0-boot2.bin", "vk-boot2.bin"}}
+	},
+	[VALKYRIE_B0] = {
+		{VK_IMAGE_TYPE_BOOT1, {"vk_b0-boot1.bin", "vk-boot1.bin"}},
+		{VK_IMAGE_TYPE_BOOT2, {"vk_b0-boot2.bin", "vk-boot2.bin"}}
+	},
+
+	[VIPER] = {
+		{VK_IMAGE_TYPE_BOOT1, {"vp-boot1.bin", ""}},
+		{VK_IMAGE_TYPE_BOOT2, {"vp-boot2.bin", ""}}
+	},
+};
+
+/* Location of memory base addresses of interest in BAR1 */
+/* Load Boot1 to start of ITCM */
+#define BAR1_CODEPUSH_BASE_BOOT1	0x100000
+
+/* Allow minimum 1s for Load Image timeout responses */
+#define LOAD_IMAGE_TIMEOUT_MS		(1 * MSEC_PER_SEC)
+
+/* Image startup timeouts */
+#define BOOT1_STARTUP_TIMEOUT_MS	(5 * MSEC_PER_SEC)
+#define BOOT2_STARTUP_TIMEOUT_MS	(10 * MSEC_PER_SEC)
+
+/* 1ms wait for checking the transfer complete status */
+#define TXFR_COMPLETE_TIMEOUT_MS	1
+
 /* MSIX usages */
 #define VK_MSIX_MSGQ_MAX		3
 #define VK_MSIX_NOTF_MAX		1
@@ -24,13 +80,570 @@
 /* Number of bits set in DMA mask*/
 #define BCM_VK_DMA_BITS			64
 
+/* Ucode boot wait time */
+#define BCM_VK_UCODE_BOOT_US            (100 * USEC_PER_MSEC)
+/* 50% margin */
+#define BCM_VK_UCODE_BOOT_MAX_US        ((BCM_VK_UCODE_BOOT_US * 3) >> 1)
+
+/* deinit time for the card os after receiving doorbell */
+#define BCM_VK_DEINIT_TIME_MS		(2 * MSEC_PER_SEC)
+
+/*
+ * module parameters
+ */
+static bool auto_load = true;
+module_param(auto_load, bool, 0444);
+MODULE_PARM_DESC(auto_load,
+		 "Load images automatically at PCIe probe time.\n");
+static uint nr_scratch_pages = VK_BAR1_SCRATCH_DEF_NR_PAGES;
+module_param(nr_scratch_pages, uint, 0444);
+MODULE_PARM_DESC(nr_scratch_pages,
+		 "Number of pre allocated DMAable coherent pages.\n");
+
+static int bcm_vk_intf_ver_chk(struct bcm_vk *vk)
+{
+	struct device *dev = &vk->pdev->dev;
+	u32 reg;
+	u16 major, minor;
+	int ret = 0;
+
+	/* read interface register */
+	reg = vkread32(vk, BAR_0, BAR_INTF_VER);
+	major = (reg >> BAR_INTF_VER_MAJOR_SHIFT) & BAR_INTF_VER_MASK;
+	minor = reg & BAR_INTF_VER_MASK;
+
+	/*
+	 * if major number is 0, it is pre-release and it would be allowed
+	 * to continue, else, check versions accordingly
+	 */
+	if (!major) {
+		dev_warn(dev, "Pre-release major.minor=%d.%d - drv %d.%d\n",
+			 major, minor, SEMANTIC_MAJOR, SEMANTIC_MINOR);
+	} else if (major != SEMANTIC_MAJOR) {
+		dev_err(dev,
+			"Intf major.minor=%d.%d rejected - drv %d.%d\n",
+			major, minor, SEMANTIC_MAJOR, SEMANTIC_MINOR);
+		ret = -EPFNOSUPPORT;
+	} else {
+		dev_dbg(dev,
+			"Intf major.minor=%d.%d passed - drv %d.%d\n",
+			major, minor, SEMANTIC_MAJOR, SEMANTIC_MINOR);
+	}
+	return ret;
+}
+
+static inline int bcm_vk_wait(struct bcm_vk *vk, enum pci_barno bar,
+			      u64 offset, u32 mask, u32 value,
+			      unsigned long timeout_ms)
+{
+	struct device *dev = &vk->pdev->dev;
+	unsigned long start_time;
+	unsigned long timeout;
+	u32 rd_val, boot_status;
+
+	start_time = jiffies;
+	timeout = start_time + msecs_to_jiffies(timeout_ms);
+
+	do {
+		rd_val = vkread32(vk, bar, offset);
+		dev_dbg(dev, "BAR%d Offset=0x%llx: 0x%x\n",
+			bar, offset, rd_val);
+
+		/* check for any boot err condition */
+		boot_status = vkread32(vk, BAR_0, BAR_BOOT_STATUS);
+		if (boot_status & BOOT_ERR_MASK) {
+			dev_err(dev, "Boot Err 0x%x, progress 0x%x after %d ms\n",
+				(boot_status & BOOT_ERR_MASK) >> BOOT_ERR_SHIFT,
+				boot_status & BOOT_PROG_MASK,
+				jiffies_to_msecs(jiffies - start_time));
+			return -EFAULT;
+		}
+
+		if (time_after(jiffies, timeout))
+			return -ETIMEDOUT;
+
+		cpu_relax();
+		cond_resched();
+	} while ((rd_val & mask) != value);
+
+	return 0;
+}
+
+static int bcm_vk_sync_card_info(struct bcm_vk *vk)
+{
+	u32 rdy_marker = vkread32(vk, BAR_1, VK_BAR1_MSGQ_DEF_RDY);
+
+	/* check for marker, but allow diags mode to skip sync */
+	if (!bcm_vk_msgq_marker_valid(vk))
+		return (rdy_marker == VK_BAR1_DIAG_RDY_MARKER ? 0 : -EINVAL);
+
+	/*
+	 * Write down scratch addr which is used for DMA. For
+	 * signed part, BAR1 is accessible only after boot2 has come
+	 * up
+	 */
+	if (vk->tdma_addr) {
+		vkwrite32(vk, (u64)vk->tdma_addr >> 32, BAR_1,
+			  VK_BAR1_SCRATCH_OFF_HI);
+		vkwrite32(vk, (u32)vk->tdma_addr, BAR_1,
+			  VK_BAR1_SCRATCH_OFF_LO);
+		vkwrite32(vk, nr_scratch_pages * PAGE_SIZE, BAR_1,
+			  VK_BAR1_SCRATCH_SZ_ADDR);
+	}
+	return 0;
+}
+
+static void bcm_vk_buf_notify(struct bcm_vk *vk, void *bufp,
+			      dma_addr_t host_buf_addr, u32 buf_size)
+{
+	/* update the dma address to the card */
+	vkwrite32(vk, (u64)host_buf_addr >> 32, BAR_1,
+		  VK_BAR1_DMA_BUF_OFF_HI);
+	vkwrite32(vk, (u32)host_buf_addr, BAR_1,
+		  VK_BAR1_DMA_BUF_OFF_LO);
+	vkwrite32(vk, buf_size, BAR_1, VK_BAR1_DMA_BUF_SZ);
+}
+
+static int bcm_vk_load_image_by_type(struct bcm_vk *vk, u32 load_type,
+				     const char *filename)
+{
+	struct device *dev = &vk->pdev->dev;
+	const struct firmware *fw = NULL;
+	void *bufp = NULL;
+	size_t max_buf, offset;
+	int ret;
+	u64 offset_codepush;
+	u32 codepush;
+	u32 value;
+	dma_addr_t boot_dma_addr;
+	bool is_stdalone;
+
+	if (load_type == VK_IMAGE_TYPE_BOOT1) {
+		/*
+		 * After POR, enable VK soft BOOTSRC so bootrom do not clear
+		 * the pushed image (the TCM memories).
+		 */
+		value = vkread32(vk, BAR_0, BAR_BOOTSRC_SELECT);
+		value |= BOOTSRC_SOFT_ENABLE;
+		vkwrite32(vk, value, BAR_0, BAR_BOOTSRC_SELECT);
+
+		codepush = CODEPUSH_BOOTSTART + CODEPUSH_BOOT1_ENTRY;
+		offset_codepush = BAR_CODEPUSH_SBL;
+
+		/* Write a 1 to request SRAM open bit */
+		vkwrite32(vk, CODEPUSH_BOOTSTART, BAR_0, offset_codepush);
+
+		/* Wait for VK to respond */
+		ret = bcm_vk_wait(vk, BAR_0, BAR_BOOT_STATUS, SRAM_OPEN,
+				  SRAM_OPEN, LOAD_IMAGE_TIMEOUT_MS);
+		if (ret < 0) {
+			dev_err(dev, "boot1 wait SRAM err - ret(%d)\n", ret);
+			goto err_buf_out;
+		}
+
+		max_buf = SZ_256K;
+		bufp = dma_alloc_coherent(dev,
+					  max_buf,
+					  &boot_dma_addr, GFP_KERNEL);
+		if (!bufp) {
+			dev_err(dev, "Error allocating 0x%zx\n", max_buf);
+			ret = -ENOMEM;
+			goto err_buf_out;
+		}
+	} else if (load_type == VK_IMAGE_TYPE_BOOT2) {
+		codepush = CODEPUSH_BOOT2_ENTRY;
+		offset_codepush = BAR_CODEPUSH_SBI;
+
+		/* Wait for VK to respond */
+		ret = bcm_vk_wait(vk, BAR_0, BAR_BOOT_STATUS, DDR_OPEN,
+				  DDR_OPEN, LOAD_IMAGE_TIMEOUT_MS);
+		if (ret < 0) {
+			dev_err(dev, "boot2 wait DDR open error - ret(%d)\n",
+				ret);
+			goto err_buf_out;
+		}
+
+		max_buf = SZ_4M;
+		bufp = dma_alloc_coherent(dev,
+					  max_buf,
+					  &boot_dma_addr, GFP_KERNEL);
+		if (!bufp) {
+			dev_err(dev, "Error allocating 0x%zx\n", max_buf);
+			ret = -ENOMEM;
+			goto err_buf_out;
+		}
+
+		bcm_vk_buf_notify(vk, bufp, boot_dma_addr, max_buf);
+	} else {
+		dev_err(dev, "Error invalid image type 0x%x\n", load_type);
+		ret = -EINVAL;
+		goto err_buf_out;
+	}
+
+	offset = 0;
+	ret = request_partial_firmware_into_buf(&fw, filename, dev,
+						bufp, max_buf, offset);
+	if (ret) {
+		dev_err(dev, "Error %d requesting firmware file: %s\n",
+			ret, filename);
+		goto err_firmware_out;
+	}
+	dev_dbg(dev, "size=0x%zx\n", fw->size);
+	if (load_type == VK_IMAGE_TYPE_BOOT1)
+		memcpy_toio(vk->bar[BAR_1] + BAR1_CODEPUSH_BASE_BOOT1,
+			    bufp,
+			    fw->size);
+
+	dev_dbg(dev, "Signaling 0x%x to 0x%llx\n", codepush, offset_codepush);
+	vkwrite32(vk, codepush, BAR_0, offset_codepush);
+
+	if (load_type == VK_IMAGE_TYPE_BOOT1) {
+		u32 boot_status;
+
+		/* wait until done */
+		ret = bcm_vk_wait(vk, BAR_0, BAR_BOOT_STATUS,
+				  BOOT1_RUNNING,
+				  BOOT1_RUNNING,
+				  BOOT1_STARTUP_TIMEOUT_MS);
+
+		boot_status = vkread32(vk, BAR_0, BAR_BOOT_STATUS);
+		is_stdalone = !BCM_VK_INTF_IS_DOWN(boot_status) &&
+			      (boot_status & BOOT_STDALONE_RUNNING);
+		if (ret && !is_stdalone) {
+			dev_err(dev,
+				"Timeout %ld ms waiting for boot1 to come up - ret(%d)\n",
+				BOOT1_STARTUP_TIMEOUT_MS, ret);
+			goto err_firmware_out;
+		} else if (is_stdalone) {
+			u32 reg;
+
+			reg = vkread32(vk, BAR_0, BAR_BOOT1_STDALONE_PROGRESS);
+			if ((reg & BOOT1_STDALONE_PROGRESS_MASK) ==
+				     BOOT1_STDALONE_SUCCESS) {
+				dev_info(dev, "Boot1 standalone success\n");
+				ret = 0;
+			} else {
+				dev_err(dev, "Timeout %ld ms - Boot1 standalone failure\n",
+					BOOT1_STARTUP_TIMEOUT_MS);
+				ret = -EINVAL;
+				goto err_firmware_out;
+			}
+		}
+	} else if (load_type == VK_IMAGE_TYPE_BOOT2) {
+		unsigned long timeout;
+
+		timeout = jiffies + msecs_to_jiffies(LOAD_IMAGE_TIMEOUT_MS);
+
+		/* To send more data to VK than max_buf allowed at a time */
+		do {
+			/*
+			 * Check for ack from card. when Ack is received,
+			 * it means all the data is received by card.
+			 * Exit the loop after ack is received.
+			 */
+			ret = bcm_vk_wait(vk, BAR_0, BAR_BOOT_STATUS,
+					  FW_LOADER_ACK_RCVD_ALL_DATA,
+					  FW_LOADER_ACK_RCVD_ALL_DATA,
+					  TXFR_COMPLETE_TIMEOUT_MS);
+			if (ret == 0) {
+				dev_dbg(dev, "Exit boot2 download\n");
+				break;
+			} else if (ret == -EFAULT) {
+				dev_err(dev, "Error detected during ACK waiting");
+				goto err_firmware_out;
+			}
+
+			/* exit the loop, if there is no response from card */
+			if (time_after(jiffies, timeout)) {
+				dev_err(dev, "Error. No reply from card\n");
+				ret = -ETIMEDOUT;
+				goto err_firmware_out;
+			}
+
+			/* Wait for VK to open BAR space to copy new data */
+			ret = bcm_vk_wait(vk, BAR_0, offset_codepush,
+					  codepush, 0,
+					  TXFR_COMPLETE_TIMEOUT_MS);
+			if (ret == 0) {
+				offset += max_buf;
+				ret = request_partial_firmware_into_buf
+						(&fw,
+						 filename,
+						 dev, bufp,
+						 max_buf,
+						 offset);
+				if (ret) {
+					dev_err(dev,
+						"Error %d requesting firmware file: %s offset: 0x%zx\n",
+						ret, filename, offset);
+					goto err_firmware_out;
+				}
+				dev_dbg(dev, "size=0x%zx\n", fw->size);
+				dev_dbg(dev, "Signaling 0x%x to 0x%llx\n",
+					codepush, offset_codepush);
+				vkwrite32(vk, codepush, BAR_0, offset_codepush);
+				/* reload timeout after every codepush */
+				timeout = jiffies +
+				    msecs_to_jiffies(LOAD_IMAGE_TIMEOUT_MS);
+			} else if (ret == -EFAULT) {
+				dev_err(dev, "Error detected waiting for transfer\n");
+				goto err_firmware_out;
+			}
+		} while (1);
+
+		/* wait for fw status bits to indicate app ready */
+		ret = bcm_vk_wait(vk, BAR_0, VK_BAR_FWSTS,
+				  VK_FWSTS_READY,
+				  VK_FWSTS_READY,
+				  BOOT2_STARTUP_TIMEOUT_MS);
+		if (ret < 0) {
+			dev_err(dev, "Boot2 not ready - ret(%d)\n", ret);
+			goto err_firmware_out;
+		}
+
+		is_stdalone = vkread32(vk, BAR_0, BAR_BOOT_STATUS) &
+			      BOOT_STDALONE_RUNNING;
+		if (!is_stdalone) {
+			ret = bcm_vk_intf_ver_chk(vk);
+			if (ret) {
+				dev_err(dev, "failure in intf version check\n");
+				goto err_firmware_out;
+			}
+
+			/* sync & channel other info */
+			ret = bcm_vk_sync_card_info(vk);
+			if (ret) {
+				dev_err(dev, "Syncing Card Info failure\n");
+				goto err_firmware_out;
+			}
+		}
+	}
+
+err_firmware_out:
+	release_firmware(fw);
+
+err_buf_out:
+	if (bufp)
+		dma_free_coherent(dev, max_buf, bufp, boot_dma_addr);
+
+	return ret;
+}
+
+static u32 bcm_vk_next_boot_image(struct bcm_vk *vk)
+{
+	u32 boot_status;
+	u32 fw_status;
+	u32 load_type = 0;  /* default for unknown */
+
+	boot_status = vkread32(vk, BAR_0, BAR_BOOT_STATUS);
+	fw_status = vkread32(vk, BAR_0, VK_BAR_FWSTS);
+
+	if (!BCM_VK_INTF_IS_DOWN(boot_status) && (boot_status & SRAM_OPEN))
+		load_type = VK_IMAGE_TYPE_BOOT1;
+	else if (boot_status == BOOT1_RUNNING)
+		load_type = VK_IMAGE_TYPE_BOOT2;
+
+	/* Log status so that we know different stages */
+	dev_info(&vk->pdev->dev,
+		 "boot-status value for next image: 0x%x : fw-status 0x%x\n",
+		 boot_status, fw_status);
+
+	return load_type;
+}
+
+static enum soc_idx get_soc_idx(struct bcm_vk *vk)
+{
+	struct pci_dev *pdev = vk->pdev;
+	enum soc_idx idx = VK_IDX_INVALID;
+	u32 rev;
+	static enum soc_idx const vk_soc_tab[] = { VALKYRIE_A0, VALKYRIE_B0 };
+
+	switch (pdev->device) {
+	case PCI_DEVICE_ID_VALKYRIE:
+		/* get the chip id to decide sub-class */
+		rev = MAJOR_SOC_REV(vkread32(vk, BAR_0, BAR_CHIP_ID));
+		if (rev < ARRAY_SIZE(vk_soc_tab)) {
+			idx = vk_soc_tab[rev];
+		} else {
+			/* Default to A0 firmware for all other chip revs */
+			idx = VALKYRIE_A0;
+			dev_warn(&pdev->dev,
+				 "Rev %d not in image lookup table, default to idx=%d\n",
+				 rev, idx);
+		}
+		break;
+
+	case PCI_DEVICE_ID_VIPER:
+		idx = VIPER;
+		break;
+
+	default:
+		dev_err(&pdev->dev, "no images for 0x%x\n", pdev->device);
+	}
+	return idx;
+}
+
+static const char *get_load_fw_name(struct bcm_vk *vk,
+				    const struct load_image_entry *entry)
+{
+	const struct firmware *fw;
+	struct device *dev = &vk->pdev->dev;
+	int ret;
+	unsigned long dummy;
+	int i;
+
+	for (i = 0; i < IMG_PER_TYPE_MAX; i++) {
+		fw = NULL;
+		ret = request_partial_firmware_into_buf(&fw,
+							entry->image_name[i],
+							dev, &dummy,
+							sizeof(dummy),
+							0);
+		release_firmware(fw);
+		if (!ret)
+			return entry->image_name[i];
+	}
+	return NULL;
+}
+
+int bcm_vk_auto_load_all_images(struct bcm_vk *vk)
+{
+	int i, ret = -1;
+	enum soc_idx idx;
+	struct device *dev = &vk->pdev->dev;
+	u32 curr_type;
+	const char *curr_name;
+
+	idx = get_soc_idx(vk);
+	if (idx == VK_IDX_INVALID)
+		goto auto_load_all_exit;
+
+	/* log a message to know the relative loading order */
+	dev_dbg(dev, "Load All for device %d\n", vk->devid);
+
+	for (i = 0; i < NUM_BOOT_STAGES; i++) {
+		curr_type = image_tab[idx][i].image_type;
+		if (bcm_vk_next_boot_image(vk) == curr_type) {
+			curr_name = get_load_fw_name(vk, &image_tab[idx][i]);
+			if (!curr_name) {
+				dev_err(dev, "No suitable firmware exists for type %d",
+					curr_type);
+				ret = -ENOENT;
+				goto auto_load_all_exit;
+			}
+			ret = bcm_vk_load_image_by_type(vk, curr_type,
+							curr_name);
+			dev_info(dev, "Auto load %s, ret %d\n",
+				 curr_name, ret);
+
+			if (ret) {
+				dev_err(dev, "Error loading default %s\n",
+					curr_name);
+				goto auto_load_all_exit;
+			}
+		}
+	}
+
+auto_load_all_exit:
+	return ret;
+}
+
+static int bcm_vk_trigger_autoload(struct bcm_vk *vk)
+{
+	if (test_and_set_bit(BCM_VK_WQ_DWNLD_PEND, vk->wq_offload) != 0)
+		return -EPERM;
+
+	set_bit(BCM_VK_WQ_DWNLD_AUTO, vk->wq_offload);
+	queue_work(vk->wq_thread, &vk->wq_work);
+
+	return 0;
+}
+
+/*
+ * deferred work queue for auto download.
+ */
+static void bcm_vk_wq_handler(struct work_struct *work)
+{
+	struct bcm_vk *vk = container_of(work, struct bcm_vk, wq_work);
+
+	if (test_bit(BCM_VK_WQ_DWNLD_AUTO, vk->wq_offload)) {
+		bcm_vk_auto_load_all_images(vk);
+
+		/*
+		 * at the end of operation, clear AUTO bit and pending
+		 * bit
+		 */
+		clear_bit(BCM_VK_WQ_DWNLD_AUTO, vk->wq_offload);
+		clear_bit(BCM_VK_WQ_DWNLD_PEND, vk->wq_offload);
+	}
+}
+
+static void bcm_to_v_reset_doorbell(struct bcm_vk *vk, u32 db_val)
+{
+	vkwrite32(vk, db_val, BAR_0, VK_BAR0_RESET_DB_BASE);
+}
+
+static int bcm_vk_trigger_reset(struct bcm_vk *vk)
+{
+	u32 i;
+	u32 value, boot_status;
+	static const u32 bar0_reg_clr_list[] = { BAR_OS_UPTIME,
+						 BAR_INTF_VER,
+						 BAR_CARD_VOLTAGE,
+						 BAR_CARD_TEMPERATURE,
+						 BAR_CARD_PWR_AND_THRE };
+
+	/* make tag '\0' terminated */
+	vkwrite32(vk, 0, BAR_1, VK_BAR1_BOOT1_VER_TAG);
+
+	for (i = 0; i < VK_BAR1_DAUTH_MAX; i++) {
+		vkwrite32(vk, 0, BAR_1, VK_BAR1_DAUTH_STORE_ADDR(i));
+		vkwrite32(vk, 0, BAR_1, VK_BAR1_DAUTH_VALID_ADDR(i));
+	}
+	for (i = 0; i < VK_BAR1_SOTP_REVID_MAX; i++)
+		vkwrite32(vk, 0, BAR_1, VK_BAR1_SOTP_REVID_ADDR(i));
+
+	/*
+	 * When boot request fails, the CODE_PUSH_OFFSET stays persistent.
+	 * Allowing us to debug the failure. When we call reset,
+	 * we should clear CODE_PUSH_OFFSET so ROM does not execute
+	 * boot again (and fails again) and instead waits for a new
+	 * codepush.  And, if previous boot has encountered error, need
+	 * to clear the entry values
+	 */
+	boot_status = vkread32(vk, BAR_0, BAR_BOOT_STATUS);
+	if (boot_status & BOOT_ERR_MASK) {
+		dev_info(&vk->pdev->dev,
+			 "Card in boot error 0x%x, clear CODEPUSH val\n",
+			 boot_status);
+		value = 0;
+	} else {
+		value = vkread32(vk, BAR_0, BAR_CODEPUSH_SBL);
+		value &= CODEPUSH_MASK;
+	}
+	vkwrite32(vk, value, BAR_0, BAR_CODEPUSH_SBL);
+
+	/* reset fw_status with proper reason, and press db */
+	vkwrite32(vk, VK_FWSTS_RESET_MBOX_DB, BAR_0, VK_BAR_FWSTS);
+	bcm_to_v_reset_doorbell(vk, VK_BAR0_RESET_DB_SOFT);
+
+	/* clear other necessary registers records */
+	for (i = 0; i < ARRAY_SIZE(bar0_reg_clr_list); i++)
+		vkwrite32(vk, 0, BAR_0, bar0_reg_clr_list[i]);
+
+	return 0;
+}
+
 static int bcm_vk_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	int err;
 	int i;
+	int id;
 	int irq;
+	char name[20];
 	struct bcm_vk *vk;
 	struct device *dev = &pdev->dev;
+	u32 boot_status;
 
 	vk = kzalloc(sizeof(*vk), GFP_KERNEL);
 	if (!vk)
@@ -57,6 +670,18 @@ static int bcm_vk_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto err_disable_pdev;
 	}
 
+	/* The tdma is a scratch area for some DMA testings. */
+	if (nr_scratch_pages) {
+		vk->tdma_vaddr = dma_alloc_coherent
+					(dev,
+					 nr_scratch_pages * PAGE_SIZE,
+					 &vk->tdma_addr, GFP_KERNEL);
+		if (!vk->tdma_vaddr) {
+			err = -ENOMEM;
+			goto err_disable_pdev;
+		}
+	}
+
 	pci_set_master(pdev);
 	pci_set_drvdata(pdev, vk);
 
@@ -85,8 +710,53 @@ static int bcm_vk_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		}
 	}
 
+	id = ida_simple_get(&bcm_vk_ida, 0, 0, GFP_KERNEL);
+	if (id < 0) {
+		err = id;
+		dev_err(dev, "unable to get id\n");
+		goto err_iounmap;
+	}
+
+	vk->devid = id;
+	snprintf(name, sizeof(name), DRV_MODULE_NAME ".%d", id);
+
+	INIT_WORK(&vk->wq_work, bcm_vk_wq_handler);
+
+	/* create dedicated workqueue */
+	vk->wq_thread = create_singlethread_workqueue(name);
+	if (!vk->wq_thread) {
+		dev_err(dev, "Fail to create workqueue thread\n");
+		err = -ENOMEM;
+		goto err_ida_remove;
+	}
+
+	/* sync other info */
+	bcm_vk_sync_card_info(vk);
+
+	/*
+	 * lets trigger an auto download.  We don't want to do it serially here
+	 * because at probing time, it is not supposed to block for a long time.
+	 */
+	boot_status = vkread32(vk, BAR_0, BAR_BOOT_STATUS);
+	if (auto_load) {
+		if ((boot_status & BOOT_STATE_MASK) == BROM_RUNNING) {
+			if (bcm_vk_trigger_autoload(vk))
+				goto err_destroy_workqueue;
+		} else {
+			dev_err(dev,
+				"Auto-load skipped - BROM not in proper state (0x%x)\n",
+				boot_status);
+		}
+	}
+
 	return 0;
 
+err_destroy_workqueue:
+	destroy_workqueue(vk->wq_thread);
+
+err_ida_remove:
+	ida_simple_remove(&bcm_vk_ida, id);
+
 err_iounmap:
 	for (i = 0; i < MAX_BAR; i++) {
 		if (vk->bar[i])
@@ -95,6 +765,10 @@ static int bcm_vk_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	pci_release_regions(pdev);
 
 err_disable_pdev:
+	if (vk->tdma_vaddr)
+		dma_free_coherent(&pdev->dev, nr_scratch_pages * PAGE_SIZE,
+				  vk->tdma_vaddr, vk->tdma_addr);
+
 	pci_free_irq_vectors(pdev);
 	pci_disable_device(pdev);
 	pci_dev_put(pdev);
@@ -110,6 +784,22 @@ static void bcm_vk_remove(struct pci_dev *pdev)
 	int i;
 	struct bcm_vk *vk = pci_get_drvdata(pdev);
 
+	/*
+	 * Trigger a reset to card and wait enough time for UCODE to rerun,
+	 * which re-initialize the card into its default state.
+	 * This ensures when driver is re-enumerated it will start from
+	 * a completely clean state.
+	 */
+	bcm_vk_trigger_reset(vk);
+	usleep_range(BCM_VK_UCODE_BOOT_US, BCM_VK_UCODE_BOOT_MAX_US);
+
+	if (vk->tdma_vaddr)
+		dma_free_coherent(&pdev->dev, nr_scratch_pages * PAGE_SIZE,
+				  vk->tdma_vaddr, vk->tdma_addr);
+
+	cancel_work_sync(&vk->wq_work);
+	destroy_workqueue(vk->wq_thread);
+
 	for (i = 0; i < MAX_BAR; i++) {
 		if (vk->bar[i])
 			pci_iounmap(pdev, vk->bar[i]);
@@ -120,6 +810,38 @@ static void bcm_vk_remove(struct pci_dev *pdev)
 	pci_disable_device(pdev);
 }
 
+static void bcm_vk_shutdown(struct pci_dev *pdev)
+{
+	struct bcm_vk *vk = pci_get_drvdata(pdev);
+	u32 reg, boot_stat;
+
+	reg = vkread32(vk, BAR_0, BAR_BOOT_STATUS);
+	boot_stat = reg & BOOT_STATE_MASK;
+
+	if (boot_stat == BOOT1_RUNNING) {
+		/* simply trigger a reset interrupt to park it */
+		bcm_vk_trigger_reset(vk);
+	} else if (boot_stat == BROM_NOT_RUN) {
+		int err;
+		u16 lnksta;
+
+		/*
+		 * The boot status only reflects boot condition since last reset
+		 * As ucode will run only once to configure pcie, if multiple
+		 * resets happen, we lost track if ucode has run or not.
+		 * Here, read the current link speed and use that to
+		 * sync up the bootstatus properly so that on reboot-back-up,
+		 * it has the proper state to start with autoload
+		 */
+		err = pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnksta);
+		if (!err &&
+		    (lnksta & PCI_EXP_LNKSTA_CLS) != PCI_EXP_LNKSTA_CLS_2_5GB) {
+			reg |= BROM_STATUS_COMPLETE;
+			vkwrite32(vk, reg, BAR_0, BAR_BOOT_STATUS);
+		}
+	}
+}
+
 static const struct pci_device_id bcm_vk_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_VALKYRIE), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_VIPER), },
@@ -132,6 +854,7 @@ static struct pci_driver pci_driver = {
 	.id_table = bcm_vk_ids,
 	.probe    = bcm_vk_probe,
 	.remove   = bcm_vk_remove,
+	.shutdown = bcm_vk_shutdown,
 };
 module_pci_driver(pci_driver);
 
-- 
2.17.1