Re: [PATCH] USB: quirks: Add USB_QUIRK_DISCONNECT_SUSPEND quirk for Lenovo A630Z TIO built-in usb-audio card

[Kai-Heng Feng]

Hi penghao,

> On Nov 18, 2020, at 20:30, penghao <penghao@xxxxxxxxxxxxx> wrote:
> 
> Add a USB_QUIRK_DISCONNECT_SUSPEND quirk for the Lenovo TIO built-in
> usb-audio. when A630Z going into S3,the system immediately wakeup 7-8
> seconds later by usb-audio disconnect interrupt to avoids the issue.
> eg dmesg:
> ....
> [  626.974091 ] usb 7-1.1: USB disconnect, device number 3
> ....
> ....
> [ 1774.486691] usb 7-1.1: new full-speed USB device number 5 using xhci_hcd
> [ 1774.947742] usb 7-1.1: New USB device found, idVendor=17ef, idProduct=a012, bcdDevice= 0.55
> [ 1774.956588] usb 7-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [ 1774.964339] usb 7-1.1: Product: Thinkcentre TIO24Gen3 for USB-audio
> [ 1774.970999] usb 7-1.1: Manufacturer: Lenovo
> [ 1774.975447] usb 7-1.1: SerialNumber: 000000000000
> [ 1775.048590] usb 7-1.1: 2:1: cannot get freq at ep 0x1

Can you please attach full dmesg with dynamic debug enabled when the issue happens?

We may need to poll for U3 in xhci_bus_suspend().

Kai-Heng

> .......
> Seeking a better fix, we've tried a lot of things, including:
> - Check that the device's power/wakeup is disabled
> - Check that remote wakeup is off at the USB level
> - All the quirks in drivers/usb/core/quirks.c
>   e.g. USB_QUIRK_RESET_RESUME,
>        USB_QUIRK_RESET,
>        USB_QUIRK_IGNORE_REMOTE_WAKEUP,
>        USB_QUIRK_NO_LPM.
> 
> but none of that makes any difference.
> 
> There are no errors in the logs showing any suspend/resume-related issues.
> When the system wakes up due to the modem, log-wise it appears to be a
> normal resume.
> 
> Introduce a quirk to disable the port during suspend when the modem is
> detected.
> 
> Changes since v5
> - Add dmesg for this issue
> 
> Changes since v4
> - Fixed add a blank line
> 
> Changes since v3
> - Fixed spelling error on appropriate
> 
> Changes since v2
> - Add Changes commit format
> 
> Changes since v1
> - Change subject form "ALSA" to "USB:"
> - Adjust to appropriate line
> 
> Signed-off-by: penghao <penghao@xxxxxxxxxxxxx>
> ---
> drivers/usb/core/quirks.c | 4 ++++
> 1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
> index 7c1198f80c23..26b852ae0d85 100644
> --- a/drivers/usb/core/quirks.c
> +++ b/drivers/usb/core/quirks.c
> @@ -410,6 +410,10 @@ static const struct usb_device_id usb_quirk_list[] = {
> 	{ USB_DEVICE(0x1532, 0x0116), .driver_info =
> 			USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL },
> 
> +	/* Lenovo ThinkCenter A630Z TI024Gen3 usb-audio */
> +	{ USB_DEVICE(0x17ef, 0xa012), .driver_info =
> +			USB_QUIRK_DISCONNECT_SUSPEND },
> +
> 	/* BUILDWIN Photo Frame */
> 	{ USB_DEVICE(0x1908, 0x1315), .driver_info =
> 			USB_QUIRK_HONOR_BNUMINTERFACES },
> -- 
> 2.11.0
> 
> 
>