Re: 5.10 regression, many XHCI swiotlb buffer is full / DMAR: Device bounce map failed errors on thunderbolt connected XHCI controller

[Hans de Goede]

Hi All,

On 11/10/20 12:36 PM, Hans de Goede wrote:
> Hi All,
> 
> Not sure if this is a XHCI driver problem at all, but I needed to start
> somewhere with reporting this so I went with:
> 
> scripts/get_maintainer.pl -f drivers/usb/host/xhci-pci.c
> 
> And added a Cc: linux-pci@xxxxxxxxxxxxxxx as bonus.
> 
> I'm seeing the following errors and very slow network performance with
> the USB NIC in a Lenovo Thunderbolt gen 2 dock.
> 
> Note that the USB NIC is connected to the XHCI controller which is
> embedded inside the dock and is connected over thunderbolt!

Ping? This is still happening and although the errors are not fatal,
outgoing network performance is very bad.

I know a lot of Linux users use thunderbolt docks and for some
reason almost all thunderbolt docks seem to be using USB attached
nics inside, so this is going to hit a lot of users if we do not
get this fixed before 5.10 gets released!

Regards,

Hans





> So the errors are:
> 
> [ 1148.744205] swiotlb_tbl_map_single: 6 callbacks suppressed
> [ 1148.744210] xhci_hcd 0000:0a:00.0: swiotlb buffer is full (sz: 8192 bytes), total 32768 (slots), used 16 (slots)
> [ 1148.744218] xhci_hcd 0000:0a:00.0: DMAR: Device bounce map: 16ea@1411c0000 dir 1 --- failed
> [ 1148.744226] r8152 4-2.1.2:1.0 ens1u2u1u2: failed tx_urb -11
> [ 1148.744368] xhci_hcd 0000:0a:00.0: swiotlb buffer is full (sz: 8192 bytes), total 32768 (slots), used 16 (slots)
> [ 1148.744375] xhci_hcd 0000:0a:00.0: DMAR: Device bounce map: 16ea@10aabc000 dir 1 --- failed
> [ 1148.744381] r8152 4-2.1.2:1.0 ens1u2u1u2: failed tx_urb -11
> [ 1148.745141] xhci_hcd 0000:0a:00.0: swiotlb buffer is full (sz: 8192 bytes), total 32768 (slots), used 16 (slots)
> [ 1148.745148] xhci_hcd 0000:0a:00.0: DMAR: Device bounce map: 118e@1411c0000 dir 1 --- failed
> [ 1148.745155] r8152 4-2.1.2:1.0 ens1u2u1u2: failed tx_urb -11
> [ 1148.951282] xhci_hcd 0000:0a:00.0: swiotlb buffer is full (sz: 8192 bytes), total 32768 (slots), used 16 (slots)
> [ 1148.951388] xhci_hcd 0000:0a:00.0: DMAR: Device bounce map: 118e@140988000 dir 1 --- failed
> [ 1148.951420] r8152 4-2.1.2:1.0 ens1u2u1u2: failed tx_urb -11
> [ 1151.013342] xhci_hcd 0000:0a:00.0: swiotlb buffer is full (sz: 8192 bytes), total 32768 (slots), used 16 (slots)
> [ 1151.013357] xhci_hcd 0000:0a:00.0: DMAR: Device bounce map: 1d2a@1411c0000 dir 1 --- failed
> [ 1151.013373] r8152 4-2.1.2:1.0 ens1u2u1u2: failed tx_urb -11
> [ 1151.018660] xhci_hcd 0000:0a:00.0: swiotlb buffer is full (sz: 8192 bytes), total 32768 (slots), used 18 (slots)
> [ 1151.018696] xhci_hcd 0000:0a:00.0: DMAR: Device bounce map: 11da@1411c0000 dir 1 --- failed
> [ 1151.018711] r8152 4-2.1.2:1.0 ens1u2u1u2: failed tx_urb -11
> [ 1151.223022] xhci_hcd 0000:0a:00.0: swiotlb buffer is full (sz: 8192 bytes), total 32768 (slots), used 16 (slots)
> [ 1151.223102] xhci_hcd 0000:0a:00.0: DMAR: Device bounce map: 11da@10aabc000 dir 1 --- failed
> [ 1151.223133] r8152 4-2.1.2:1.0 ens1u2u1u2: failed tx_urb -11
> [ 1151.228810] xhci_hcd 0000:0a:00.0: swiotlb buffer is full (sz: 8192 bytes), total 32768 (slots), used 16 (slots)
> [ 1151.228870] xhci_hcd 0000:0a:00.0: DMAR: Device bounce map: 11da@10aabc000 dir 1 --- failed
> [ 1151.228898] r8152 4-2.1.2:1.0 ens1u2u1u2: failed tx_urb -11
> [ 1151.234792] xhci_hcd 0000:0a:00.0: swiotlb buffer is full (sz: 8192 bytes), total 32768 (slots), used 16 (slots)
> [ 1151.234852] xhci_hcd 0000:0a:00.0: DMAR: Device bounce map: 11da@10aabc000 dir 1 --- failed
> [ 1151.234882] r8152 4-2.1.2:1.0 ens1u2u1u2: failed tx_urb -11
> 
> etc.
> 
> This happens as soon as I generate any serious amount of outgoing network traffic. E.g. rsyncing files
> to another machine.
> 
> Regards,
> 
> Hans
>